SOLVER7 Study. Nothing Else.
2026 Board Paper Q35

The following data gives the information on the observed lifetime (in hours) of 200 electrical components : Find the mean lifetime (in hours) of the electrical components.

CBSE Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have a big box of light bulbs. Some last a short time, some last longer. To find the typical lifetime, we pick the middle value of each group. We use that middle value to stand in for every bulb in that group. Then we add up all the lifetimes and divide by the total number of bulbs. It is like finding a fair share. When we do that here, the answer comes out to 61 hours.

Answer: The mean lifetime of the electrical components is \( 61 \) hours.

📖 Mean Lifetime of Electrical Components

Detailed Explanation

When data is given in a grouped frequency distribution (with class intervals), we cannot use individual values. Instead, we assume that all observations in a class are represented by the midpoint (class mark) of that class. The mean is then calculated using these class marks and the corresponding frequencies. Here, class mark for each class is found using \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \). We then use the direct method (or assumed mean method) to compute the mean. The direct method is straightforward: multiply each class mark by its frequency, add them all, then divide by the total frequency.

Formula Used

\[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} \]

Solution

  1. Step 1: Identify class marks: The class mark of each class interval is the average of its lower and upper limits. For 0-20: \( x_1 = \dfrac{0+20}{2} = 10 \). Similarly: 20-40 gives 30, 40-60 gives 50, 60-80 gives 70, 80-100 gives 90, 100-120 gives 110.
  2. Step 2: Write frequencies from the table: The frequencies (number of electrical components) are: \( f_1 = 10,\ f_2 = 35,\ f_3 = 50,\ f_4 = 60,\ f_5 = 30,\ f_6 = 15 \). Total frequency: \[ \sum f_i = 10+35+50+60+30+15 = 200 \]
  3. Step 3: Compute \( f_i x_i \) for each class: Multiply each class mark with its frequency: \[ 10 \times 10 = 100 \] \[ 35 \times 30 = 1050 \] \[ 50 \times 50 = 2500 \] \[ 60 \times 70 = 4200 \] \[ 30 \times 90 = 2700 \] \[ 15 \times 110 = 1650 \]
  4. Step 4: Find \( \sum f_i x_i \): Adding all products: \[ \sum f_i x_i = 100 + 1050 + 2500 + 4200 + 2700 + 1650 = 12200 \]
  5. Step 5: Apply the mean formula: Using the formula: \[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} = \dfrac{12200}{200} = 61 \]

Final Answer

The mean lifetime of the electrical components is \( 61 \) hours.

Common Mistake

A common mistake is to use the upper limit (or lower limit) of each class as \( x_i \) instead of the class mark (midpoint). Always take the midpoint of each interval when computing the mean of grouped data.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Find the class mark for each interval: The class mark is the midpoint of each class interval, calculated as \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \). For the six intervals: \( 0\text{–}20 \to x_1 = 10 \), \( 20\text{–}40 \to x_2 = 30 \), \( 40\text{–}60 \to x_3 = 50 \), \( 60\text{–}80 \to x_4 = 70 \), \( 80\text{–}100 \to x_5 = 90 \), \( 100\text{–}120 \to x_6 = 110 \). — Reason: Since we cannot use individual data values in a grouped distribution, the class mark acts as the single representative value for all observations in that class.
  2. Step 2: Record the frequencies: Read the frequencies directly from the given table: \( f_1 = 10,\ f_2 = 35,\ f_3 = 50,\ f_4 = 60,\ f_5 = 30,\ f_6 = 15 \). — Reason: These frequencies tell us how many electrical components have a lifetime falling in each interval, and they act as weights in the mean calculation.
  3. Step 3: Compute the total frequency: Add all frequencies together: \[ \sum f_i = 10 + 35 + 50 + 60 + 30 + 15 = 200 \] — Reason: The total frequency \( \sum f_i \) is the denominator in the mean formula, representing the total number of components observed.
  4. Step 4: Calculate \( f_i x_i \) for each class: Multiply each class mark by its corresponding frequency: \[ 10 \times 10 = 100 \] \[ 35 \times 30 = 1050 \] \[ 50 \times 50 = 2500 \] \[ 60 \times 70 = 4200 \] \[ 30 \times 90 = 2700 \] \[ 15 \times 110 = 1650 \] — Reason: Each product \( f_i x_i \) represents the total lifetime contributed by all components in that particular class interval.
  5. Step 5: Find \( \sum f_i x_i \): Add all the products computed in the previous step: \[ \sum f_i x_i = 100 + 1050 + 2500 + 4200 + 2700 + 1650 = 12200 \] — Reason: This sum represents the total lifetime (in hours) of all 200 electrical components combined.
  6. Step 6: Apply the direct method formula to get the mean: Substitute the computed values into the formula: \[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} = \dfrac{12200}{200} = 61 \] — Reason: Dividing the total lifetime by the total number of components gives the average (mean) lifetime per component.

Final Answer

The mean lifetime of the electrical components is \( 61 \) hours.

Common Mistake

One common mistake: Students sometimes use the class limits (lower or upper boundary) instead of the class mark (midpoint) when computing \( f_i x_i \), which gives an incorrect mean. Always use \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \) as the representative value for each class.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Class marks \( x_i \): 10, 30, 50, 70, 90, 110. Frequencies \( f_i \): 10, 35, 50, 60, 30, 15. Total: \( \sum f_i = 200 \)
  2. Step 2: Products \( f_i x_i \): \( 10 \times 10 = 100 \), \( 35 \times 30 = 1050 \), \( 50 \times 50 = 2500 \), \( 60 \times 70 = 4200 \), \( 30 \times 90 = 2700 \), \( 15 \times 110 = 1650 \)
  3. Step 3: \( \sum f_i x_i = 100 + 1050 + 2500 + 4200 + 2700 + 1650 = 12200 \)
  4. Step 4: \( \bar{x} = \dfrac{12200}{200} = 61 \)

Answer: The mean lifetime of the electrical components is \( 61 \) hours.

➕ More Examples

More Examples

Example 1

Question: The following table shows the daily wages (in rupees) of 100 workers in a factory. Find the mean daily wage.
Daily Wages (in Rs): 100–120, 120–140, 140–160, 160–180, 180–200
Number of Workers: 12, 18, 27, 25, 18

Solution: Step 1: Find the class mark \( x_i \) for each class interval.
For 100–120: \( x_1 = \frac{100 + 120}{2} = 110 \)
For 120–140: \( x_2 = \frac{120 + 140}{2} = 130 \)
For 140–160: \( x_3 = \frac{140 + 160}{2} = 150 \)
For 160–180: \( x_4 = \frac{160 + 180}{2} = 170 \)
For 180–200: \( x_5 = \frac{180 + 200}{2} = 190 \)
Step 2: Compute \( f_i x_i \) for each class. \( f_1 x_1 = 12 \times 110 = 1320 \) \( f_2 x_2 = 18 \times 130 = 2340 \) \( f_3 x_3 = 27 \times 150 = 4050 \) \( f_4 x_4 = 25 \times 170 = 4250 \) \( f_5 x_5 = 18 \times 190 = 3420 \)
Step 3: Find the totals. \[ \sum f_i = 12 + 18 + 27 + 25 + 18 = 100 \] \[ \sum f_i x_i = 1320 + 2340 + 4050 + 4250 + 3420 = 15380 \]
Step 4: Calculate the mean. \[ \bar{x} = \frac{\sum f_i x_i}{\sum f_i} = \frac{15380}{100} = 153.8 \]

Answer: Mean daily wage = Rs 153.80

Example 2

Question: The following frequency distribution shows the ages (in years) of 80 patients admitted to a hospital in a month. Find the mean age of the patients.
Age (in years): 10–20, 20–30, 30–40, 40–50, 50–60, 60–70
Number of Patients: 6, 11, 21, 23, 14, 5

Solution: Step 1: Find the class mark \( x_i \) for each class interval.
For 10–20: \( x_1 = \frac{10 + 20}{2} = 15 \)
For 20–30: \( x_2 = \frac{20 + 30}{2} = 25 \)
For 30–40: \( x_3 = \frac{30 + 40}{2} = 35 \)
For 40–50: \( x_4 = \frac{40 + 50}{2} = 45 \)
For 50–60: \( x_5 = \frac{50 + 60}{2} = 55 \)
For 60–70: \( x_6 = \frac{60 + 70}{2} = 65 \)
Step 2: Compute \( f_i x_i \) for each class. \( f_1 x_1 = 6 \times 15 = 90 \) \( f_2 x_2 = 11 \times 25 = 275 \) \( f_3 x_3 = 21 \times 35 = 735 \) \( f_4 x_4 = 23 \times 45 = 1035 \) \( f_5 x_5 = 14 \times 55 = 770 \) \( f_6 x_6 = 5 \times 65 = 325 \)
Step 3: Find the totals. \[ \sum f_i = 6 + 11 + 21 + 23 + 14 + 5 = 80 \] \[ \sum f_i x_i = 90 + 275 + 735 + 1035 + 770 + 325 = 3230 \]
Step 4: Calculate the mean. \[ \bar{x} = \frac{\sum f_i x_i}{\sum f_i} = \frac{3230}{80} = 40.375 \]

Answer: Mean age of patients = 40.375 years

🎯 Try a Similar Question

Try a Similar Question

Question: The following data gives the observed lifetimes (in hours) of 250 electrical bulbs. Find the mean lifetime (in hours) of the bulbs.
Lifetime (in hours) | Number of bulbs 0 – 20 | 10 20 – 40 | 35 40 – 60 | 52 60 – 80 | 61 80 – 100 | 58 100 – 120 | 34

Solution

  1. Step 1: Find the class marks (midpoints): The class mark for each interval is calculated as: \[ x_i = \frac{\text{lower limit} + \text{upper limit}}{2} \]
    For 0–20: \( x_1 = \frac{0+20}{2} = 10 \)
    For 20–40: \( x_2 = \frac{20+40}{2} = 30 \)
    For 40–60: \( x_3 = \frac{40+60}{2} = 50 \)
    For 60–80: \( x_4 = \frac{60+80}{2} = 70 \)
    For 80–100: \( x_5 = \frac{80+100}{2} = 90 \)
    For 100–120: \( x_6 = \frac{100+120}{2} = 110 \)
  2. Step 2: Compute \( f_i x_i \) for each class: Multiply each class mark by its frequency: \( f_1 x_1 = 10 \times 10 = 100 \) \( f_2 x_2 = 35 \times 30 = 1050 \) \( f_3 x_3 = 52 \times 50 = 2600 \) \( f_4 x_4 = 61 \times 70 = 4270 \) \( f_5 x_5 = 58 \times 90 = 5220 \) \( f_6 x_6 = 34 \times 110 = 3740 \)
  3. Step 3: Find \( \sum f_i \) and \( \sum f_i x_i \): Total number of bulbs: \[ \sum f_i = 10 + 35 + 52 + 61 + 58 + 34 = 250 \] Sum of all products: \[ \sum f_i x_i = 100 + 1050 + 2600 + 4270 + 5220 + 3740 = 16980 \]
  4. Step 4: Apply the mean formula: Using the direct method formula: \[ \bar{x} = \frac{\sum f_i x_i}{\sum f_i} = \frac{16980}{250} \] \[ \bar{x} = 67.92 \text{ hours} \]

Answer: The mean lifetime of the electrical bulbs is \( 67.92 \) hours.

Everything you get with Solver7

More questions in Statistics