SOLVER7 Study. Nothing Else.
Exercise 13.1 Q7

To find out the concentration of SO\(_2\) in the air (in parts per million, \(i.e\)., ppm), the data was collected for 30 localities in a certain city and is presented below: Find the mean concentration of SO\(_2\) in the air.

CBSE Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you and your friends each scored different marks on a test. To find how everyone did on average, you add all the marks and divide by the number of friends. Here, scientists measured air pollution in many neighbourhoods. Each group of neighbourhoods had a range of pollution levels. We picked the middle value of each range to represent that group. Multiply each middle value by how many neighbourhoods it represents, add everything up, then divide by the total neighbourhoods. That gives the average pollution level.

Answer: The mean concentration of SO₂ in the air is approximately \(0.099\) ppm.

📖 Mean Concentration of SO2 in Air

Detailed Explanation

When data is given in the form of a grouped frequency distribution (class intervals with frequencies), we cannot use individual data values. Instead, we assume that all observations in a class are concentrated at the midpoint (class mark) of that class. The class mark is the average of the lower and upper limits of the class. The mean of grouped data using the direct method is then computed as the weighted average of the class marks, with frequencies serving as the weights.

Formula Used

\[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} \] where \( x_i \) is the class mark of the \( i^{th} \) class and \( f_i \) is its frequency.

Solution

  1. Step 1: Find the class marks: The class mark of each class is \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \). For 0.00 - 0.04: \( x_i = 0.02 \). For 0.04 - 0.08: \( x_i = 0.06 \). For 0.08 - 0.12: \( x_i = 0.10 \). For 0.12 - 0.16: \( x_i = 0.14 \). For 0.16 - 0.20: \( x_i = 0.18 \). For 0.20 - 0.24: \( x_i = 0.22 \).
  2. Step 2: Compute f_i x_i for each class: Multiply each class mark by its frequency: \[ 4 \times 0.02 = 0.08 \] \[ 9 \times 0.06 = 0.54 \] \[ 9 \times 0.10 = 0.90 \] \[ 2 \times 0.14 = 0.28 \] \[ 4 \times 0.18 = 0.72 \] \[ 2 \times 0.22 = 0.44 \]
  3. Step 3: Find the sums: Add up the frequencies and the products. \[ \sum f_i = 4 + 9 + 9 + 2 + 4 + 2 = 30 \] \[ \sum f_i x_i = 0.08 + 0.54 + 0.90 + 0.28 + 0.72 + 0.44 = 2.96 \]
  4. Step 4: Apply the mean formula: Substitute into the formula for the mean. \[ \bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} = \dfrac{2.96}{30} \approx 0.099 \ \text{ppm} \]

Final Answer

The mean concentration of SO2 in the air is approximately \( 0.099 \) ppm.

Common Mistake

A common mistake is using the lower limit (or upper limit) of each class instead of the class mark (midpoint). Always use \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \) when applying the direct method for grouped data.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Recognise the data type.
    Reason: The SO₂ concentration values are arranged in class intervals (e.g., 0.00–0.04, 0.04–0.08, …) with frequencies. Because we don't have individual values, we must use the midpoint of each interval to represent the data in that group.
  2. Step 2: Calculate the class mark \(x_i\) for each interval.
    Reason: The class mark is the midpoint of the interval and acts as the best representative value for all observations within that group.
    \[x_i = \dfrac{\text{Lower Limit} + \text{Upper Limit}}{2}\]
    • 0.00–0.04 → \(\dfrac{0.00+0.04}{2} = 0.02\)
    • 0.04–0.08 → \(\dfrac{0.04+0.08}{2} = 0.06\)
    • 0.08–0.12 → \(\dfrac{0.08+0.12}{2} = 0.10\)
    • 0.12–0.16 → \(\dfrac{0.12+0.16}{2} = 0.14\)
    • 0.16–0.20 → \(\dfrac{0.16+0.20}{2} = 0.18\)
    • 0.20–0.24 → \(\dfrac{0.20+0.24}{2} = 0.22\)
  3. Step 3: Compute \(f_i x_i\) for each row.
    Reason: Multiplying the class mark by its frequency weights each interval proportionally — intervals with more localities exert a greater pull on the mean.
    Interval (ppm) \(f_i\) \(x_i\) \(f_i x_i\)
    0.00 – 0.0440.020.08
    0.04 – 0.0890.060.54
    0.08 – 0.1290.100.90
    0.12 – 0.1620.140.28
    0.16 – 0.2040.180.72
    0.20 – 0.2420.220.44
  4. Step 4: Add up all the frequencies to get \(\sum f_i\).
    Reason: The total frequency equals the total number of localities surveyed — this is the denominator of the mean formula.
    \[\sum f_i = 4 + 9 + 9 + 2 + 4 + 2 = 30\]
  5. Step 5: Add up all the \(f_i x_i\) values to get \(\sum f_i x_i\).
    Reason: This total represents the combined weighted concentration across all 30 localities — it is the numerator of the mean formula.
    \[\sum f_i x_i = 0.08 + 0.54 + 0.90 + 0.28 + 0.72 + 0.44 = 2.96\]
  6. Step 6: Apply the Direct Method formula.
    Reason: Dividing the total weighted sum by the total number of localities yields the mean concentration.
    \[\bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} = \dfrac{2.96}{30} \approx 0.0986\overline{6} \approx 0.099 \text{ ppm}\]

Final Answer

The mean concentration of SO₂ in the air is approximately \(0.099\) ppm.

Common Mistake

One common mistake: Students sometimes use the class boundary values (like 0.04 or 0.08) directly as the representative value for an interval, instead of calculating the midpoint. Always compute the class mark by averaging both limits — \(x_i = \dfrac{\text{Lower} + \text{Upper}}{2}\) — before multiplying by the frequency.

✍️ Exam-ready Answer

Exam-ready Answer

\(x_i\): 0.02, 0.06, 0.10, 0.14, 0.18, 0.22

Interval  \(f_i\)  \(x_i\) \(f_i x_i\)
0.00 – 0.0440.020.08
0.04 – 0.0890.060.54
0.08 – 0.1290.100.90
0.12 – 0.1620.140.28
0.16 – 0.2040.180.72
0.20 – 0.2420.220.44
Total302.96

\[\bar{x} = \dfrac{\sum f_i x_i}{\sum f_i} = \dfrac{2.96}{30} \approx 0.099 \text{ ppm}\]

Answer: The mean concentration of SO₂ in the air is approximately \(0.099\) ppm.

➕ More Examples

More Examples

Example 1

Question: The noise level (in decibels, dB) was recorded for 40 locations near a highway and is presented in the following frequency distribution table. Find the mean noise level.
Class Interval (dB) | Frequency 60 – 65 | 4 65 – 70 | 8 70 – 75 | 12 75 – 80 | 9 80 – 85 | 5 85 – 90 | 2

Solution: Step 1 — Find class marks \( x_i \).
Class 60–65: \( x_i = \dfrac{60+65}{2} = 62.5 \)
Class 65–70: \( x_i = 67.5 \)
Class 70–75: \( x_i = 72.5 \)
Class 75–80: \( x_i = 77.5 \)
Class 80–85: \( x_i = 82.5 \)
Class 85–90: \( x_i = 87.5 \)
Step 2 — Choose assumed mean \( A = 72.5 \) and class width \( h = 5 \).
Step 3 — Compute \( u_i = \dfrac{x_i - 72.5}{5} \) for each class. \( u_i \) values: \(-2,\; -1,\; 0,\; 1,\; 2,\; 3 \)
Step 4 — Compute \( f_i u_i \) for each class.
Class 60–65: \( f_i u_i = 4 \times (-2) = -8 \)
Class 65–70: \( f_i u_i = 8 \times (-1) = -8 \)
Class 70–75: \( f_i u_i = 12 \times 0 = 0 \)
Class 75–80: \( f_i u_i = 9 \times 1 = 9 \)
Class 80–85: \( f_i u_i = 5 \times 2 = 10 \)
Class 85–90: \( f_i u_i = 2 \times 3 = 6 \)
Step 5 — Sum up. \[ \sum f_i = 4 + 8 + 12 + 9 + 5 + 2 = 40 \] \[ \sum f_i u_i = -8 + (-8) + 0 + 9 + 10 + 6 = 9 \]
Step 6 — Apply the formula. \[ \bar{x} = A + \left(\frac{\sum f_i u_i}{\sum f_i}\right) \times h = 72.5 + \left(\frac{9}{40}\right) \times 5 \] \[ \bar{x} = 72.5 + \frac{45}{40} = 72.5 + 1.125 = 73.625 \text{ dB} \]

Answer: Mean noise level \( = 73.625 \) dB

Example 2

Question: The concentration of PM2.5 particles (in micrograms per cubic metre, \( \mu g/m^3 \)) was measured at 50 monitoring stations in a city and is given below. Find the mean concentration.
Class Interval (\( \mu g/m^3 \)) | Frequency 20 – 30 | 5 30 – 40 | 10 40 – 50 | 15 50 – 60 | 12 60 – 70 | 6 70 – 80 | 2

Solution: Step 1 — Find class marks \( x_i \).
Class 20–30: \( x_i = 25 \)
Class 30–40: \( x_i = 35 \)
Class 40–50: \( x_i = 45 \)
Class 50–60: \( x_i = 55 \)
Class 60–70: \( x_i = 65 \)
Class 70–80: \( x_i = 75 \)
Step 2 — Choose assumed mean \( A = 45 \) and class width \( h = 10 \).
Step 3 — Compute \( u_i = \dfrac{x_i - 45}{10} \). \( u_i \) values: \( -2,\; -1,\; 0,\; 1,\; 2,\; 3 \)
Step 4 — Compute \( f_i u_i \).
Class 20–30: \( f_i u_i = 5 \times (-2) = -10 \)
Class 30–40: \( f_i u_i = 10 \times (-1) = -10 \)
Class 40–50: \( f_i u_i = 15 \times 0 = 0 \)
Class 50–60: \( f_i u_i = 12 \times 1 = 12 \)
Class 60–70: \( f_i u_i = 6 \times 2 = 12 \)
Class 70–80: \( f_i u_i = 2 \times 3 = 6 \)
Step 5 — Sum up. \[ \sum f_i = 5 + 10 + 15 + 12 + 6 + 2 = 50 \] \[ \sum f_i u_i = -10 + (-10) + 0 + 12 + 12 + 6 = 10 \]
Step 6 — Apply the formula. \[ \bar{x} = A + \left(\frac{\sum f_i u_i}{\sum f_i}\right) \times h = 45 + \left(\frac{10}{50}\right) \times 10 \] \[ \bar{x} = 45 + 2 = 47 \; \mu g/m^3 \]

Answer: Mean PM2.5 concentration \( = 47 \; \mu g/m^3 \)

🎯 Try a Similar Question

Try a Similar Question

Question: To study the level of nitrogen dioxide (NO\(_2\)) pollution in a city, data was collected for 40 localities and is presented below. Find the mean concentration of NO\(_2\) in the air (in ppm). \[ \begin{array}{|c|c|} \hline \text{Concentration of NO}_2 \text{ (in ppm)} & \text{Number of localities} \\ \hline 0.00 - 0.04 & 4 \\ 0.04 - 0.08 & 9 \\ 0.08 - 0.12 & 13 \\ 0.12 - 0.16 & 10 \\ 0.16 - 0.20 & 4 \\ \hline \end{array} \]

Solution

  1. Step 1: Find the class marks: The class mark \( x_i \) for each interval is the average of the lower and upper class boundaries. For \( 0.00 - 0.04 \): \( x_1 = \dfrac{0.00 + 0.04}{2} = 0.02 \). For \( 0.04 - 0.08 \): \( x_2 = 0.06 \). For \( 0.08 - 0.12 \): \( x_3 = 0.10 \). For \( 0.12 - 0.16 \): \( x_4 = 0.14 \). For \( 0.16 - 0.20 \): \( x_5 = 0.18 \).
  2. Step 2: Choose the assumed mean: Choose the assumed mean \( A = 0.10 \) (the middle class mark, which simplifies calculations).
  3. Step 3: Calculate deviations: The deviation is \( d_i = x_i - A \). So: \( d_1 = 0.02 - 0.10 = -0.08 \), \( d_2 = 0.06 - 0.10 = -0.04 \), \( d_3 = 0.10 - 0.10 = 0 \), \( d_4 = 0.14 - 0.10 = 0.04 \), \( d_5 = 0.18 - 0.10 = 0.08 \).
  4. Step 4: Calculate \( f_i d_i \) for each class: Multiply each frequency by its deviation: \( f_1 d_1 = 4 \times (-0.08) = -0.32 \), \( f_2 d_2 = 9 \times (-0.04) = -0.36 \), \( f_3 d_3 = 13 \times 0 = 0 \), \( f_4 d_4 = 10 \times 0.04 = 0.40 \), \( f_5 d_5 = 4 \times 0.08 = 0.32 \).
  5. Step 5: Find the summations: Total number of localities: \[ \sum f_i = 4 + 9 + 13 + 10 + 4 = 40 \] Sum of \( f_i d_i \): \[ \sum f_i d_i = -0.32 + (-0.36) + 0 + 0.40 + 0.32 = 0.04 \]
  6. Step 6: Apply the formula for mean: Using the assumed mean formula: \[ \text{Mean} = A + \dfrac{\sum f_i d_i}{\sum f_i} = 0.10 + \dfrac{0.04}{40} = 0.10 + 0.001 = 0.101 \]

Answer: The mean concentration of NO\(_2\) in the air is \( 0.101 \) ppm.

Everything you get with Solver7

More questions in Statistics