SOLVER7 Study. Nothing Else.
Exercise 13.2 Q6

A student noted the number of cars passing through a spot on a road for 100 periods each of 3 minutes and summarised it in the table given below. Find the mode of the data :

CBSE Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you are counting how many cars pass a checkpoint each day. The mode is like finding your favourite flavour — the one that shows up the most. The group where the most cars appeared is our special group. We then do a tiny calculation to find the exact middle of that busy group. That gives us the most common number of cars.

Answer: The mode of the data is approximately 44.7 cars.

📖 Finding the Mode of Grouped Data

Detailed Explanation

The mode is the value that appears most often in a data set. When data is grouped into class intervals, we cannot directly read the mode. Instead, we first find the modal class — the class interval with the highest frequency.

Looking at the table, the frequencies are 7, 14, 13, 12, 20, 11, 15 and 8. The largest frequency is 20, which belongs to the class 40-50. So this is our modal class, and we use the mode formula on it.

Formula Used

The formula for the mode of grouped data is:

\[\text{Mode} = l + \left( \dfrac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h\]

where:

  • = lower limit of the modal class
  • \(f_1\) = frequency of the modal class
  • \(f_0\) = frequency of the class before the modal class
  • \(f_2\) = frequency of the class after the modal class
  • = class size

Solution

  1. The highest frequency is 20, so the modal class is 40-50.
  2. Identify values: \(l = 40\), \(f_1 = 20\), \(f_0 = 12\), \(f_2 = 11\), \(h = 10\).
  3. Substitute into the formula: \[\text{Mode} = 40 + \left( \dfrac{20 - 12}{2(20) - 12 - 11} \right) \times 10\]
  4. Simplify numerator and denominator: \[\text{Mode} = 40 + \left( \dfrac{8}{40 - 23} \right) \times 10 = 40 + \dfrac{8}{17} \times 10\]
  5. Compute the value: \[\text{Mode} = 40 + \dfrac{80}{17} = 40 + 4.7 = 44.7\]

Final Answer

The mode of the data is approximately \(44.7\) cars.

Common Mistake

Students often wrongly take the highest frequency (20) as the mode. The mode is not the frequency itself! Also, be careful not to swap \(f_0\) (frequency before) and \(f_2\) (frequency after), and always remember to multiply by the class size \( h \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List all frequencies from the table.
    Reason: We need to scan all frequencies to find the highest one, which tells us where the mode lies.
    The frequencies for each class are: 7, 14, 13, 12, 20, 11, 15, 8.
  2. Step 2: Identify the modal class.
    Reason: The modal class is the class interval with the greatest frequency — this is where the mode is concentrated.
    The highest frequency is 20, which belongs to the class interval 40–50. So the modal class is 40–50.
  3. Step 3: Extract the values needed for the formula.
    Reason: The mode formula requires the lower limit, the class width, and three consecutive frequencies centred on the modal class.
    \(l = 40\) (lower limit of modal class)
    \(f_1 = 20\) (frequency of modal class 40–50)
    \(f_0 = 12\) (frequency of the class just before: 30–40)
    \(f_2 = 11\) (frequency of the class just after: 50–60)
    \(h = 10\) (class width)
  4. Step 4: Write out the mode formula with values substituted.
    Reason: Substituting known values converts the general formula into a specific calculation we can evaluate.
    \[\text{Mode} = 40 + \left( \dfrac{20 - 12}{2(20) - 12 - 11} \right) \times 10\]
  5. Step 5: Simplify the numerator.
    Reason: Breaking the calculation into smaller parts reduces errors.
    Numerator: \(20 - 12 = 8\)
    \[\text{Mode} = 40 + \left( \dfrac{8}{2(20) - 12 - 11} \right) \times 10\]
  6. Step 6: Simplify the denominator.
    Reason: We complete the denominator separately so the fraction is clear before multiplying.
    Denominator: \(2 \times 20 - 12 - 11 = 40 - 12 - 11 = 17\)
    \[\text{Mode} = 40 + \left( \dfrac{8}{17} \right) \times 10\]
  7. Step 7: Multiply the fraction by the class width.
    Reason: This gives us the correction term to add to the lower limit of the modal class.
    \[\dfrac{8}{17} \times 10 = \dfrac{80}{17} \approx 4.7\]
  8. Step 8: Add the correction term to the lower limit.
    Reason: The mode is not exactly at the lower limit; this final addition shifts it to the correct estimated position within the modal class.
    \[\text{Mode} = 40 + 4.7 = 44.7\]

Final Answer

The mode of the data is approximately 44.7 cars.

Common Mistake

One common mistake: Students often confuse \(f_0\) and \(f_2\) — remember, \(f_0\) is always the frequency of the class immediately before the modal class, and \(f_2\) is the frequency of the class immediately after it. Swapping these two values will produce an incorrect answer.

✍️ Exam-ready Answer

Exam-ready Answer

Modal class: 40–50  (max frequency = 20)
\(l = 40,\; f_1 = 20,\; f_0 = 12,\; f_2 = 11,\; h = 10\)

\[\text{Mode} = 40 + \left( \dfrac{20 - 12}{2(20) - 12 - 11} \right) \times 10 = 40 + \dfrac{8}{17} \times 10 \approx 44.7\]

Answer: The mode of the data is approximately 44.7 cars.

➕ More Examples

More Examples

Example 1

Question: A survey recorded the number of customers visiting a shop during 80 one-hour intervals. The data is summarised below. Find the mode of the data. Number of customers: 0–10, 10–20, 20–30, 30–40, 40–50 Number of intervals: 6, 14, 28, 22, 10

Solution: Step 1: Identify the modal class. The frequencies are: 6, 14, 28, 22, 10. The highest frequency is 28, which belongs to the class 20–30. So the modal class is 20–30. Step 2: Identify the values needed for the formula. Lower limit of modal class: \( l = 20 \) Frequency of modal class: \( f_1 = 28 \) Frequency of class preceding modal class (10–20): \( f_0 = 14 \) Frequency of class succeeding modal class (30–40): \( f_2 = 22 \) Class width: \( h = 10 \) Step 3: Apply the mode formula. \[ \text{Mode} = l + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] Substituting the values: \[ \text{Mode} = 20 + \left( \frac{28 - 14}{2 \times 28 - 14 - 22} \right) \times 10 \] \[ \text{Mode} = 20 + \left( \frac{14}{56 - 14 - 22} \right) \times 10 \] \[ \text{Mode} = 20 + \left( \frac{14}{20} \right) \times 10 \] \[ \text{Mode} = 20 + 7 = 27 \] Therefore, the mode of the data is 27 customers.

Answer: Mode = 27

Example 2

Question: A factory recorded the number of units produced by a machine during 90 shifts. The data is given in the table below. Find the mode of the data. Units produced: 10–20, 20–30, 30–40, 40–50, 50–60, 60–70 Number of shifts: 5, 12, 30, 25, 13, 5

Solution: Step 1: Identify the modal class. The frequencies are: 5, 12, 30, 25, 13, 5. The highest frequency is 30, which belongs to the class 30–40. So the modal class is 30–40. Step 2: Identify the values needed for the formula. Lower limit of modal class: \( l = 30 \) Frequency of modal class: \( f_1 = 30 \) Frequency of class preceding modal class (20–30): \( f_0 = 12 \) Frequency of class succeeding modal class (40–50): \( f_2 = 25 \) Class width: \( h = 10 \) Step 3: Apply the mode formula. \[ \text{Mode} = l + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] Substituting the values: \[ \text{Mode} = 30 + \left( \frac{30 - 12}{2 \times 30 - 12 - 25} \right) \times 10 \] \[ \text{Mode} = 30 + \left( \frac{18}{60 - 12 - 25} \right) \times 10 \] \[ \text{Mode} = 30 + \left( \frac{18}{23} \right) \times 10 \] \[ \text{Mode} = 30 + \frac{180}{23} \] \[ \text{Mode} = 30 + 7.826\ldots \approx 37.83 \] Therefore, the mode of the data is approximately 37.83 units.

Answer: Mode \( \approx 37.83 \) units

🎯 Try a Similar Question

Try a Similar Question

Question: A school recorded the number of students visiting the library during 80 free periods, each of 45 minutes, and summarised the data in the table below. Find the mode of the data. Number of Students | Number of Periods 0 – 10 | 4 10 – 20 | 9 20 – 30 | 18 30 – 40 | 28 40 – 50 | 12 50 – 60 | 6 60 – 70 | 3

Solution

  1. Step 1: Identify the Modal Class: The modal class is the class interval with the highest frequency. Looking at the table, the class 30 – 40 has the highest frequency of 28. So the modal class is 30 – 40.
  2. Step 2: Identify the Required Values: From the modal class 30 – 40, we identify: Lower boundary of modal class: \( l = 30 \) Frequency of modal class: \( f_1 = 28 \) Frequency of class preceding the modal class (20 – 30): \( f_0 = 18 \) Frequency of class succeeding the modal class (40 – 50): \( f_2 = 12 \) Class width: \( h = 10 \)
  3. Step 3: Apply the Mode Formula: The formula for mode in grouped data is \[ \text{Mode} = l + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h \] Substituting the values: \[ \text{Mode} = 30 + \left( \frac{28 - 18}{2 \times 28 - 18 - 12} \right) \times 10 \]
  4. Step 4: Simplify the Numerator and Denominator: Numerator: \( f_1 - f_0 = 28 - 18 = 10 \) Denominator: \( 2f_1 - f_0 - f_2 = 56 - 18 - 12 = 26 \) So the expression becomes \[ \text{Mode} = 30 + \left( \frac{10}{26} \right) \times 10 \]
  5. Step 5: Calculate the Final Value: \[ \text{Mode} = 30 + \frac{100}{26} \] \[ \text{Mode} = 30 + 3.846\ldots \] \[ \text{Mode} \approx 33.85 \]

Answer: The mode of the data is approximately 33.85 students.

Everything you get with Solver7

More questions in Statistics