SOLVER7 Study. Nothing Else.
2022 Board Paper Q7(a)

Draw a circle of radius 2·5 cm. From a point P lying outside the circle at a distance of 6 cm from the center of the circle, construct tangents PA and PB to the circle.

CBSE Class 10 Maths · Circles

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle is a round pond and you are standing outside it. You want to touch the edge of the pond using a straight stick. There are exactly two ways to do this without crossing the water. Each way, your stick just barely grazes the edge at one special point. At that special point, the stick and the line going to the centre always form a perfect corner. Here, the pond has a radius of 2.5 cm and you stand 6 cm away from the centre, so each stick is about 5.45 cm long.

Answer: The two tangents PA and PB are constructed successfully. Both tangents are equal in length, each approximately 5.45 cm. The angles OAP and OBP are each 90°, confirming the construction is correct.

📖 Construction of Tangents from an External Point

Detailed Explanation

A tangent to a circle is a line that touches the circle at exactly one point. A key property used in this construction is: the tangent at any point on a circle is perpendicular to the radius drawn to that point. This means angle OAP = 90° and angle OBP = 90°, where O is the centre and A, B are the points of tangency. To construct tangents from an external point, we use the fact that if we draw a circle with OP as diameter, it intersects the original circle at exactly the two points of tangency. This is because any angle inscribed in a semicircle is 90°, which matches the required tangent-radius condition.

Formula Used

Length of tangent from external point P: \[ PA = PB = \sqrt{OP^2 - r^2} \]
where OP is the distance from P to centre O, and r is the radius of the circle.
In this problem: \( OP = 6 \) cm, \( r = 2.5 \) cm \[ PA = \sqrt{6^2 - 2.5^2} = \sqrt{36 - 6.25} = \sqrt{29.75} \approx 5.45 \text{ cm} \]

Solution

  1. Step 1: Draw the Circle: Draw a circle with centre O and radius 2.5 cm using a compass. Mark the centre clearly as O.
  2. Step 2: Mark the External Point P: From centre O, measure 6 cm along a straight line and mark the external point P. So the distance OP = 6 cm.
  3. Step 3: Find the Midpoint of OP: Draw a line segment OP. Find its midpoint M by drawing perpendicular bisectors (or by measuring and marking the midpoint at 3 cm from both O and P).
  4. Step 4: Draw a Circle with Diameter OP: With M as centre and radius equal to MP (which equals MO = 3 cm), draw another circle. This circle has OP as its diameter.
  5. Step 5: Mark the Intersection Points: The circle drawn in Step 4 will intersect the original circle (radius 2.5 cm) at two points. Label these points A and B. These are the points of tangency.
  6. Step 6: Draw the Tangents: Join P to A and P to B. The line segments PA and PB are the required tangents to the circle from the external point P.
  7. Step 7: Verify: Check by joining O to A and O to B. The angles OAP and OBP should each measure 90°, confirming that PA and PB are true tangents. You can verify the length: \( PA = \sqrt{OP^2 - OA^2} = \sqrt{36 - 6.25} = \sqrt{29.75} \approx 5.45 \) cm.

Final Answer

The two tangents PA and PB are constructed successfully. Both tangents are equal in length, each approximately 5.45 cm. The angles OAP and OBP are each 90°, confirming the construction is correct.

Common Mistake

A very common mistake is not finding the midpoint of OP accurately, which causes the auxiliary circle to be drawn with the wrong radius. If the midpoint is wrong, the auxiliary circle will not intersect the original circle at the correct tangent points, leading to an incorrect construction. Always use a compass and perpendicular bisector method to find the exact midpoint of OP.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre O and radius \( r = 2.5 \) cm using a compass, and label the centre clearly as O. — Reason: This is the circle to which we need to draw tangents; the radius value is given in the problem.
  2. Step 2: From O, draw a straight ray and mark a point P on it such that \( OP = 6 \) cm. — Reason: P is the external point from which both tangents must be drawn, and placing it on a ray through O keeps the diagram neat and measurable.
  3. Step 3: Locate the midpoint M of segment OP by drawing the perpendicular bisector of OP (or simply measuring \( OM = MP = 3 \) cm and marking that point). — Reason: M will serve as the centre of a new circle whose diameter is OP; finding the midpoint is therefore essential before drawing that circle.
  4. Step 4: With M as centre and radius \( MP = 3 \) cm, draw a second circle. — Reason: Any point on this circle sees the segment OP at exactly \( 90^\circ \) (angle in a semicircle theorem), which matches the tangent–radius condition we need.
  5. Step 5: Mark the two points where the new circle intersects the original circle; label them A and B. — Reason: At each intersection point the angle OAP (or OBP) is \( 90^\circ \), confirming that OA is perpendicular to PA, i.e., PA and PB are genuine tangents.
  6. Step 6: Draw straight lines from P through A and from P through B, extending them slightly beyond A and B. — Reason: These lines PA and PB are the required tangents; extending them makes the tangent lines clearly visible in the construction.
  7. Step 7: Verify the construction by measuring PA and PB with a ruler and checking them against the calculated value. The expected length is \[ PA = \sqrt{6^2 - 2.5^2} = \sqrt{29.75} \approx 5.45 \text{ cm} \] — Reason: Comparing the measured length with the theoretical value confirms that the construction is accurate.

Final Answer

The two tangents PA and PB are constructed successfully. Both tangents are equal in length, each approximately 5.45 cm. The angles OAP and OBP are each 90°, confirming the construction is correct.

Common Mistake

One common mistake: students sometimes draw the second (auxiliary) circle with radius OP instead of radius MP, making it twice as large as required and causing it to miss the correct intersection points on the original circle.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( r = 2.5 \) cm, \( OP = 6 \) cm. Draw circle with centre O, radius 2.5 cm; mark external point P such that \( OP = 6 \) cm.
  2. Step 2: Locate midpoint M of OP where \( OM = MP = 3 \) cm. Draw a second circle with centre M and radius \( 3 \) cm (diameter OP).
  3. Step 3: Mark the two intersection points A and B of the two circles. Join PA and PB — these are the required tangents.
  4. Step 4: Verify: \( PA = \sqrt{6^2 - 2.5^2} = \sqrt{36 - 6.25} = \sqrt{29.75} \approx 5.45 \) cm, with \( \angle OAP = \angle OBP = 90^{\circ} \).

Answer: The two tangents PA and PB are constructed successfully. Both tangents are equal in length, each approximately 5.45 cm. The angles OAP and OBP are each 90°, confirming the construction is correct.

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius 3 cm. From a point P outside the circle, at a distance of 7 cm from the centre O, construct the two tangents PA and PB to the circle. Also find the length of each tangent.

Solution: Step 1: Draw a circle with centre O and radius 3 cm.
Step 2: Mark point P such that OP = 7 cm.
Step 3: Find the midpoint M of OP. Since OP = 7 cm, we have OM = \( \dfrac{7}{2} \) = 3.5 cm.
Step 4: Draw a circle with centre M and radius 3.5 cm (equal to OM = MP).
Step 5: This new circle intersects the original circle at two points. Label them A and B.
Step 6: Join P to A and P to B. PA and PB are the required tangents.
Verification: Since A lies on the circle with diameter OP, the angle OAP = 90°, confirming OA \( \perp \) PA.
To find the length of each tangent, apply the Pythagoras theorem in triangle OAP: \[ PA^2 = OP^2 - OA^2 \]
Substituting OP = 7 cm and OA = 3 cm: \[ PA^2 = 7^2 - 3^2 = 49 - 9 = 40 \]
Therefore: \[ PA = \sqrt{40} = 2\sqrt{10} \approx 6.32 \text{ cm} \]

Answer: Each tangent has length \( 2\sqrt{10} \approx 6.32 \) cm.

Example 2

Question: A circle has its centre at O and a radius of 4 cm. A point Q is located 9 cm away from O. Construct the two tangents QC and QD from Q to the circle and calculate the length of each tangent.

Solution: Step 1: Draw a circle with centre O and radius 4 cm.
Step 2: Mark point Q on the paper such that OQ = 9 cm.
Step 3: Find the midpoint N of segment OQ. Since OQ = 9 cm, we have ON = NQ = \( \dfrac{9}{2} \) = 4.5 cm.
Step 4: With N as centre and radius 4.5 cm, draw another circle. This circle passes through both O and Q (since the angle in a semicircle is 90°).
Step 5: Mark the points C and D where the new circle intersects the original circle.
Step 6: Draw QC and QD. These are the two required tangents from Q to the circle.
Verification: Angle OCQ = 90° (angle in semicircle on diameter OQ), so OC \( \perp \) QC, confirming QC is a tangent.
To calculate the length, use the Pythagoras theorem in triangle OCQ: \[ QC^2 = OQ^2 - OC^2 \]
Substituting OQ = 9 cm and OC = 4 cm: \[ QC^2 = 9^2 - 4^2 = 81 - 16 = 65 \]
Therefore: \[ QC = \sqrt{65} \approx 8.06 \text{ cm} \]

Answer: Each tangent has length \( \sqrt{65} \approx 8.06 \) cm.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius 3 cm. From a point P outside the circle at a distance of 7 cm from the centre O, construct the two tangents PA and PB to the circle. Measure the length of each tangent and verify that the angle OAP is \(90^\circ\).

Solution

  1. Step 1: Draw the Circle: Draw a circle with centre O and radius \(r = 3\) cm.
  2. Step 2: Mark the External Point: Mark a point P outside the circle such that \(OP = 7\) cm. Join O and P with a straight line.
  3. Step 3: Find the Midpoint of OP: Using a ruler and compass, find the midpoint M of the segment OP. Since \(OP = 7\) cm, we have \(OM = MP = 3.5\) cm.
  4. Step 4: Draw the Auxiliary Circle: With M as centre and radius \(MP = 3.5\) cm, draw a circle (the auxiliary circle). This circle will pass through both O and P.
  5. Step 5: Mark the Points of Tangency: Let the auxiliary circle intersect the original circle at points A and B. These are the points of tangency.
  6. Step 6: Draw the Tangents: Join P to A and P to B. The line segments PA and PB are the required tangents to the circle.
  7. Step 7: Calculate the Length of Each Tangent: Using the tangent-length formula: \[ PA = \sqrt{OP^2 - r^2} \] Substituting \(OP = 7\) cm and \(r = 3\) cm: \[ PA = \sqrt{7^2 - 3^2} = \sqrt{49 - 9} = \sqrt{40} \approx 6.32 \text{ cm} \]
  8. Step 8: Verify the Right Angle: Since OA is a radius and PA is a tangent at A, by the tangent-radius theorem, \(\angle OAP = 90^\circ\). This can be confirmed using the converse of the Pythagoras theorem: \[ OA^2 + PA^2 = 3^2 + 40 = 9 + 40 = 49 = OP^2 \] Since \(OA^2 + PA^2 = OP^2\), angle OAP is indeed \(90^\circ\).

Answer: The two tangents PA and PB are constructed successfully. Both tangents are equal in length, each approximately \(6.32\) cm (since \(\sqrt{40} \approx 6.32\) cm). The angles OAP and OBP are each \(90^\circ\), confirming the construction is correct.

Everything you get with Solver7

More questions in Circles

Chapter 10 Examples Q1 430/3/1 2024 / Section A Q1 Chapter 10 Examples Q2 30/2/1 2023 / Section A Q2 430/5/1 2023 / Section A Q2 Chapter 10 Examples Q3 Exercise 10.1 Q1 Exercise 10.1 Q2(i) 30/2/1 2026 / Section A Q5 430/2/1 2023 / Section A Q5 Exercise 10.1 Q2(ii) Exercise 10.1 Q2(iii) 30/1/1 2026 / Section A Q7 30/2/1 2026 / Section A Q7 Exercise 10.1 Q2(iv) 30/1/1 2022 / Section A Q6 30/3/1 2026 / Section A Q8 430/1/1 2022 / Section A Q6 430/3/1 2022 / Section A Q6 430/4/1 2026 / Section A Q8 CBSE-ADDL2 2024 / Section A Q8 Exercise 10.1 Q3 430/1/1 2026 / Section A Q9 430/2/1 2026 / Section A Q9 430/3/1 2024 / Section A Q9 CBSE-ADDL1 2024 / Section A Q9 CBSE-ADDL2 2024 / Section A Q9 Exercise 10.1 Q4 30/1/1 2022 / Section B Q8 430/1/1 2022 / Section B Q8(a) Exercise 10.2 Q1 30/5/1 2023 / Section A Q11 430/3/1 2026 / Section A Q11 Exercise 10.2 Q2 30/2/1 2026 / Section A Q12 430/4/1 2024 / Section A Q12 430/5/1 2024 / Section A Q12 Exercise 10.2 Q3 430/2/1 2026 / Section A Q13 430/4/1 2026 / Section A Q13 430/5/1 2024 / Section A Q13 CBSE-ADDL2 2024 / Section A Q13 Exercise 10.2 Q4 30/4/1 2023 / Section A Q14 430/3/1 2022 / Section C Q11(a) 430/4/1 2024 / Section A Q14 430/5/1 2023 / Section A Q14 Exercise 10.2 Q5 30/2/1 2023 / Section A Q15 30/4/1 2023 / Section A Q15 430/3/1 2022 / Section C Q11(b) Exercise 10.2 Q6 30/1/1 2022 / Section C Q12 30/1/1 2026 / Section A Q16 30/5/1 2023 / Section A Q16 430/1/1 2022 / Section C Q12 430/4/1 2024 / Section A Q16 430/5/1 2024 / Section A Q16 Exercise 10.2 Q7 430/4/1 2024 / Section A Q17