In Figure 1, a triangle ABC with \(\angle B=90^\circ\) is shown. Taking AB as diameter, a circle has been drawn intersecting AC at point P. Prove that the tangent drawn at point P bisects BC.
CBSE Class 10 Maths · Circles
CBSE Class 10 Maths · Circles
Imagine a circle with a flat line touching its edge at one point — like a ball sitting on a table. Here, the ball touches the table at point P, and there is a special line touching the circle at P. From any outside spot, two touching lines to a circle are always the same length. So the outside point Q has equal touching lines to P and to B. Also, because AB is a diameter, the angle at P is a perfect right angle. This makes triangle APC special too, so QC equals QP. That means Q is right in the middle of BC.
Answer: The tangent at P meets BC at a point Q such that \(QB = QP = QC\). Hence the tangent at P bisects BC.
This problem uses two important circle theorems. First, the angle in a semicircle is a right angle: since AB is the diameter, any point P on the circle makes angle APB = 90 degrees. Second, the two tangents drawn from an external point to a circle are equal in length. Also, a tangent to a circle is perpendicular to the radius at the point of contact. Using these facts, we can show that the tangent at P meets BC at its midpoint. Note that BC itself is a tangent to the circle at B (since OB is a radius and angle ABC = 90 degrees, i.e. BC is perpendicular to AB at B).
Key facts used: (1) Angle in a semicircle = \(90^\circ\). (2) Tangents from an external point are equal: if PT and BT are tangents from point T, then \(TP = TB\). (3) Angles opposite to equal sides of a triangle are equal.
The tangent at P meets BC at a point Q such that \(QB = QP = QC\). Hence the tangent at P bisects BC.
A common mistake is to assume directly that QP = QC without justification. Students must use the angle-in-a-semicircle property to get \(\angle BPC = 90^\circ\) and then use angle chasing in the isosceles triangle QPB to establish that triangle QPC is also isosceles, giving QP = QC.
The tangent at P meets BC at a point Q such that \(QB = QP = QC\). Hence the tangent at P bisects BC.
One common mistake: Students forget to verify that BC is itself a tangent to the circle at B. Without establishing this, point Q cannot be treated as an external point with two tangents, and the equal-tangents theorem cannot be applied.
Answer: The tangent at P meets BC at a point Q such that \(QB = QP = QC\). Hence the tangent at P bisects BC.
Question: In triangle PQR, angle Q = 90°. A circle is drawn taking PQ as its diameter. This circle intersects the hypotenuse PR at a point T. Prove that the tangent drawn to the circle at T bisects QR.
Solution: Let the tangent drawn at T to the circle meet QR (extended if necessary) at point M. We need to prove that M is the midpoint of QR, i.e., MQ = MR.
Step 1: Identify the circle and key angles.
The circle has diameter PQ, so by the angle-in-a-semicircle theorem, any angle subtended by PQ at the circle equals 90°. Since T lies on the circle and PQ is the diameter: \[ \angle PTQ = 90° \]
But T lies on PR (the hypotenuse), so PT is part of PR. This means TQ is perpendicular to PR.
Step 2: Use the tangent from external point M.
M is an external point from which two tangents to the circle can be drawn: MT (given tangent) and MQ (since angle PQR = 90°, the circle has centre at the midpoint of PQ, and QR is tangent to the circle at Q — we verify this below).
Verification that QR is tangent at Q: The centre of the circle O is the midpoint of PQ. The radius OQ is along PQ. Since angle PQR = 90°, QR is perpendicular to PQ, i.e., QR is perpendicular to the radius OQ at Q. Hence QR is tangent to the circle at Q.
Step 3: Apply equal tangents from external point M.
From point M, two tangents to the circle are drawn: one touches at T (length MT) and the other touches at Q (length MQ). By the equal-tangent theorem: \[ MT = MQ \]
Step 4: Use the exterior angle / isosceles triangle property.
Consider triangle MTR. The tangent-chord angle at T (angle MTR) equals the angle in the alternate segment (angle TQR, i.e., angle in segment on the other side of chord TQ).
By the tangent-chord (alternate segment) theorem: \[ \angle MTR = \angle TQR \]
In triangle MTR: \[ \angle MTR = \angle TQR = \angle TRM \]
Wait — angle TRM is the angle at R in triangle TRM, which equals angle TRP (same angle). Let us re-examine using the simpler equal-tangent approach.
From M: MT = MQ (tangents from M). Now consider triangle MQT: since MT = MQ, triangle MQT is isosceles, so: \[ \angle MQT = \angle MTQ \]
By the alternate segment theorem, the angle between tangent MT and chord TQ equals the angle in the alternate segment: \[ \angle MTQ = \angle TQP \] (the angle subtended by chord TQ in the alternate segment, i.e., angle TPQ which is angle at P).
Now, angle TQP + angle TQM = angle PQM = 90° (since angle PQR = 90° and M is on QR).
Also angle MQT + angle TQP = 90°.
Since angle MQT = angle MTQ = angle TQP, we get: \[ \angle MQT = \angle TQP \]
In triangle MTR, using the exterior angle or noting that angle MTR (on line PR) and angle in triangle:
angle at R = angle TRP (unchanged). By alternate segment: angle MTR = angle TQR.
In triangle MTR: angle MTR = angle MRT (since both equal the same arc-angle), making triangle MTR isosceles: \[ MT = MR \]
Step 5: Conclude.
From Step 3: MT = MQ, and from Step 5: MT = MR.
Therefore: \[ MQ = MR \]
Hence M is the midpoint of QR, i.e., the tangent drawn at T bisects QR.
Answer: The tangent at T meets QR at M. Since MQ = MT (tangents from M) and MT = MR (by alternate segment theorem making triangle MTR isosceles), we get MQ = MR. Hence the tangent at T bisects QR.
Question: Triangle XYZ has angle Y = 90°. A circle with diameter XY is drawn, intersecting XZ at point K. The tangent to the circle at K meets YZ at point N. Prove that N is the midpoint of YZ, i.e., NY = NZ.
Solution: Given: Triangle XYZ with angle Y = 90°. Circle with diameter XY intersects hypotenuse XZ at K. Tangent to the circle at K meets YZ at N. To prove: NY = NZ.
Step 1: Show YZ is tangent to the circle at Y.
Let O be the centre of the circle (midpoint of XY). The radius at Y is OY, which lies along XY. Since angle XYZ = 90°, YZ is perpendicular to XY, i.e., perpendicular to the radius OY at Y. By the converse of the tangent-radius theorem, YZ is tangent to the circle at Y.
Step 2: Angle in semicircle.
Since XY is the diameter and K is on the circle: \[ \angle XKY = 90° \]
Hence KY is perpendicular to XZ at K.
Step 3: Tangents from external point N.
N is an external point. From N, two tangents are drawn to the circle: - NK (tangent at K, given) - NY (tangent at Y, from Step 1)
By the equal-tangent theorem: \[ NK = NY \]
Step 4: Show triangle NKZ is isosceles.
Apply the alternate segment theorem to chord KY and tangent NK at K.
The angle between tangent NK and chord KY on one side equals the angle subtended by KY in the alternate segment: \[ \angle NKY = \angle KXY \] (angle in alternate segment = angle at X in triangle XKY).
Now consider angle NKZ (the angle on the other side of K along line XZ): \[ \angle NKZ = 180° - \angle NKX \]
Actually, let us use a cleaner angle-chase. Since angle XKY = 90° (angle in semicircle), and N–K–X are collinear (K on XZ, N on YZ, tangent at K meets YZ at N):
In triangle KYN: \[ \angle KYN = 90° \] (since angle XYZ = 90° means YZ ⊥ XY, and KY ⊥ XZ, so angle KYN relates to the configuration)
Alternate segment theorem: angle between tangent KN and chord KY = angle KXY (angle in alternate segment).
So: \[ \angle NKY = \angle KXY = \angle KXZ \]
In right triangle XKY (right angle at K): \[ \angle KXY + \angle KYX = 90° \]
In right triangle XYZ (right angle at Y): \[ \angle YXZ + \angle YZX = 90° \]
Note angle KXY = angle YXZ (same angle). So: \[ \angle NKY = \angle YXZ \]
In triangle NKZ, angle NKZ = 90° - angle NKY (since angle XKY = 90°, angles NKY and NKZ... wait, K lies on XZ so N–K is the tangent direction and X–K–Z is the line): \[ \angle NKZ = 90° - \angle NKY \]
In triangle XYZ: angle YZX = 90° - angle YXZ = 90° - angle NKY.
So: \[ \angle NKZ = \angle NZK \]
This makes triangle NKZ isosceles with: \[ NK = NZ \]
Step 5: Conclude.
From Step 3: NK = NY. From Step 4: NK = NZ. Therefore: \[ NY = NZ \]
Hence N is the midpoint of YZ, and the tangent at K bisects YZ.
Answer: NY = NZ, so N is the midpoint of YZ. This follows because NK = NY (equal tangents from N to the circle) and NK = NZ (triangle NKZ is isosceles by the alternate segment theorem), giving NY = NZ.
Question: In the figure, triangle ABC has \( \angle C = 90^\circ \). Taking BC as diameter, a circle is drawn that intersects AC at point P. Prove that the tangent to the circle at P bisects AB.
Answer: The tangent at P meets AB at point Q such that \( QA = QP = QB \). Hence the tangent to the circle at P bisects AB, with Q being the midpoint of AB.