SOLVER7 Study. Nothing Else.
Exercise 1.3 Q6

Look at several examples of rational numbers in the form \(\dfrac{p}{q}(q\ne0),\) where \(p\) and \(q\) are integers with no common factors other than \(1\) and having terminating decimal representations (expansions). Can you guess what property q must satisfy\(?\)

CBSE Class 9 Maths · Number Systems

Solution

👶 Simple Explanation

Simple Explanation

Imagine you want to share a cake perfectly without any crumbs left over. Our number system works in groups of ten, and ten is just \( 2 \times 5 \). So a fraction like \( \frac{3}{8} \) divides cleanly because \( 8 = 2 \times 2 \times 2 \) fits neatly into powers of ten. But a fraction like \( \frac{1}{3} \) never ends because \( 3 \) has nothing to do with \( 2 \) or \( 5 \). Only denominators built from \( 2 \)s and \( 5 \)s let the decimal stop.

Answer: The denominator \( q \) (when the fraction is in lowest terms) must have only \( 2 \) and \( 5 \) as its prime factors, i.e. \( q = 2^{m} \times 5^{n} \) where \( m, n \) are non-negative integers. If \( q \) has any other prime factor (like \( 3, 7, 11, \ldots \)), the decimal expansion will not terminate.

📖 Terminating Decimals and the Denominator q

Detailed Explanation

A rational number is any number of the form \( \frac{p}{q} \) where \( p \) and \( q \) are integers, \( q \ne 0 \), and they have no common factor other than \( 1 \) (this means the fraction is in its lowest form). Some rational numbers have a decimal expansion that stops after a finite number of digits (terminating), while others repeat forever (non-terminating recurring). By looking at examples, we can find out what makes the difference. The key idea is that our number system is base ten, and \( 10 = 2 \times 5 \). So a fraction terminates only when its denominator can be written using the prime factors \( 2 \) and \( 5 \) alone.

Formula Used

A rational number \( \frac{p}{q} \) in lowest terms has a terminating decimal expansion if and only if the denominator can be written as \( q = 2^{m} \times 5^{n} \), where \( m \) and \( n \) are non-negative integers.

Solution

  1. Step 1: Write down a few rational numbers in lowest form and find their decimal expansions. For example, \( \frac{1}{2} = 0.5 \), \( \frac{3}{4} = 0.75 \), \( \frac{7}{8} = 0.875 \), \( \frac{1}{5} = 0.2 \), \( \frac{3}{10} = 0.3 \), and \( \frac{7}{20} = 0.35 \). Each of these stops after a finite number of digits, so they are terminating.
  2. Step 2: Now look at the prime factors of each denominator. We factorise: \( 2 = 2 \), \( 4 = 2^{2} \), \( 8 = 2^{3} \), \( 5 = 5 \), \( 10 = 2 \times 5 \), and \( 20 = 2^{2} \times 5 \). Notice that every denominator is built only from the primes \( 2 \) and \( 5 \).
  3. Step 3: Compare with non-terminating cases. Take \( \frac{1}{3} = 0.333... \) and \( \frac{2}{7} = 0.285714... \). Here the denominators are \( 3 \) and \( 7 \), which contain prime factors other than \( 2 \) and \( 5 \). These decimals never stop; they repeat. This shows a clear pattern.
  4. Step 4: Understand why this happens. A terminating decimal can always be written with a denominator that is a power of \( 10 \), and \( 10 = 2 \times 5 \). So its denominator (in lowest form) can only carry the primes \( 2 \) and \( 5 \). For example, \( \frac{7}{20} = \frac{7}{2^{2} \times 5} = \frac{7 \times 5}{2^{2} \times 5^{2}} = \frac{35}{100} = 0.35 \). We multiplied to make the denominator a power of \( 10 \).
  5. Step 5: State the property. From these observations, we guess: \( \frac{p}{q} \) (in lowest terms) has a terminating decimal expansion exactly when the denominator \( q \) has no prime factors other than \( 2 \) and \( 5 \), that is \( q = 2^{m} \times 5^{n} \) for some non-negative integers \( m \) and \( n \).

Final Answer

The denominator \( q \) (when the fraction is in lowest terms) must have only \( 2 \) and \( 5 \) as its prime factors, i.e. \( q = 2^{m} \times 5^{n} \) where \( m, n \) are non-negative integers. If \( q \) has any other prime factor (like \( 3, 7, 11, \ldots \)), the decimal expansion will not terminate.

Common Mistake

A common mistake is to check the prime factors of the denominator before reducing the fraction to lowest form. For example, \( \frac{6}{15} \) looks like it has a factor \( 3 \) and \( 5 \), suggesting it does not terminate; but in lowest form \( \frac{6}{15} = \frac{2}{5} = 0.4 \), which terminates. Always simplify first, then examine the denominator's prime factors.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Start by recalling what a rational number is. Any number that can be expressed as \( \frac{p}{q} \), where \( p \) and \( q \) are integers and \( q \ne 0 \), is rational. For this investigation, always reduce the fraction to its lowest terms first (cancel all common factors between \( p \) and \( q \)). — Reason: Working in lowest terms ensures that the denominator \( q \) reveals only the prime factors that truly affect the decimal behaviour, with no extra common factors hiding the pattern.
  2. Step 2: List several rational numbers that produce terminating decimals and compute them: \( \frac{1}{2} = 0.5 \), \( \frac{3}{4} = 0.75 \), \( \frac{7}{8} = 0.875 \), \( \frac{1}{5} = 0.2 \), \( \frac{3}{10} = 0.3 \), and \( \frac{7}{20} = 0.35 \). Each decimal stops after a finite number of digits. — Reason: Collecting examples gives us concrete evidence to search for a pattern in the denominators.
  3. Step 3: Prime-factorise each denominator from the list above: \( 2 = 2^{1} \), \( 4 = 2^{2} \), \( 8 = 2^{3} \), \( 5 = 5^{1} \), \( 10 = 2^{1} \times 5^{1} \), and \( 20 = 2^{2} \times 5^{1} \). Observe that every denominator uses only the primes 2 and 5. — Reason: Prime factorisation exposes the building blocks of each denominator, making the shared pattern immediately visible.
  4. Step 4: Now consider rational numbers whose denominators contain a prime other than 2 or 5: \( \frac{1}{3} = 0.333\ldots \), \( \frac{1}{7} = 0.142857142857\ldots \), and \( \frac{2}{11} = 0.1818\ldots \). None of these terminate; they all repeat endlessly. — Reason: Counter-examples confirm that introducing a prime factor such as 3, 7, or 11 in the denominator breaks the termination property.
  5. Step 5: Understand why the primes 2 and 5 are special. Our decimal system is base ten, and \[ 10 = 2 \times 5 \] So any denominator of the form \( 2^{m} \times 5^{n} \) can be converted into a power of 10 by multiplying numerator and denominator by the appropriate missing factor. For example, \( \frac{3}{4} = \frac{3}{2^{2}} \) is multiplied top and bottom by \( 5^{2} = 25 \) to give \( \frac{75}{100} = 0.75 \). — Reason: This multiplication trick works only when the denominator has no prime factors other than 2 and 5, because only then can we build an exact power of 10 in the denominator.
  6. Step 6: Generalise the pattern into a rule. For a rational number \( \frac{p}{q} \) already in lowest terms, write the prime factorisation of \( q \). If every prime factor is either 2 or 5, then \( q \) has the form \( 2^{m} \times 5^{n} \) for some non-negative integers \( m \) and \( n \), and the decimal terminates. If \( q \) contains any other prime factor, the decimal will be non-terminating and recurring. — Reason: Generalising from the pattern lets us test any rational number without actually doing the long division.
  7. Step 7: Apply the rule to verify a new example. Check whether \( \frac{17}{125} \) terminates. The denominator is \( 125 = 5^{3} \), which has only the prime factor 5, so it fits the form \( 2^{0} \times 5^{3} \). Multiply numerator and denominator by \( 2^{3} = 8 \) to obtain \( \frac{136}{1000} = 0.136 \), confirming termination. — Reason: Testing the rule on a fresh example builds confidence that the generalisation is correct and shows how to convert the fraction in practice.

Final Answer

The denominator \( q \) (when the fraction is in lowest terms) must have only \( 2 \) and \( 5 \) as its prime factors, i.e. \( q = 2^{m} \times 5^{n} \) where \( m, n \) are non-negative integers. If \( q \) has any other prime factor (like \( 3, 7, 11, \ldots \)), the decimal expansion will not terminate.

Common Mistake

One common mistake: students check whether the fraction terminates before reducing it to lowest terms. For example, \( \frac{6}{12} \) has denominator 12 = 2² × 3, which looks like it contains the prime 3, but once reduced to lowest terms it becomes \( \frac{1}{2} \), whose denominator is simply 2, and the decimal terminates as 0.5. Always simplify the fraction fully before examining the prime factorisation of the denominator.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Check terminating examples: \( \frac{1}{2} = 0.5 \), \( \frac{3}{4} = 0.75 \), \( \frac{7}{8} = 0.875 \), \( \frac{1}{5} = 0.2 \), \( \frac{7}{20} = 0.35 \) — all terminate.
  2. Step 2: Factorise each denominator: \( 2 = 2^{1} \), \( 4 = 2^{2} \), \( 8 = 2^{3} \), \( 5 = 5^{1} \), \( 10 = 2 \times 5 \), \( 20 = 2^{2} \times 5 \) — only primes \( 2 \) and \( 5 \) appear.
  3. Step 3: Check non-terminating examples: \( \frac{1}{3} = 0.333\ldots \), \( \frac{1}{7} = 0.142857\ldots \) — denominators \( 3 \) and \( 7 \) contain primes other than \( 2 \) or \( 5 \).
  4. Step 4: Conclusion: denominator \( q \) must satisfy \( q = 2^{m} \times 5^{n} \) for the decimal to terminate; any other prime factor causes non-termination.

Answer: The denominator \( q \) (when the fraction is in lowest terms) must have only \( 2 \) and \( 5 \) as its prime factors, i.e. \( q = 2^{m} \times 5^{n} \) where \( m, n \) are non-negative integers. If \( q \) has any other prime factor (like \( 3, 7, 11, \ldots \)), the decimal expansion will not terminate.

➕ More Examples

More Examples

Example 1

Question: Examine each of the following rational numbers and determine which ones have a terminating decimal expansion. Justify your answer by inspecting the denominator after reducing the fraction to its lowest terms. (i) \( \frac{17}{40} \) (ii) \( \frac{11}{12} \) (iii) \( \frac{21}{35} \) (iv) \( \frac{9}{250} \) Also state the property that the denominator must satisfy for the decimal expansion to terminate.

Solution: We check each fraction by reducing it to lowest terms and then prime-factorising its denominator. (i) \( \frac{17}{40} \) Here \( \gcd(17, 40) = 1 \), so the fraction is already in lowest terms. Prime factorisation of the denominator: \[ 40 = 2^{3} \times 5^{1} \] Since 40 has only 2 and 5 as prime factors, the decimal expansion terminates. Verification: \[ \frac{17}{40} = \frac{17 \times 5^{2}}{40 \times 5^{2}} = \frac{17 \times 25}{1000} = \frac{425}{1000} = 0.425 \] (ii) \( \frac{11}{12} \) Here \( \gcd(11, 12) = 1 \), so the fraction is already in lowest terms. Prime factorisation of the denominator: \[ 12 = 2^{2} \times 3 \] Since 12 contains the prime factor 3 (which is neither 2 nor 5), the decimal expansion is non-terminating and repeating. Verification: \[ \frac{11}{12} = 0.9166\ldots \] (non-terminating repeating) (iii) \( \frac{21}{35} \) First reduce: \( \gcd(21, 35) = 7 \), so \[ \frac{21}{35} = \frac{3}{5} \] Prime factorisation of the new denominator: \[ 5 = 5^{1} \] Since 5 has only 5 as its prime factor, the decimal expansion terminates. Verification: \[ \frac{3}{5} = \frac{3 \times 2}{5 \times 2} = \frac{6}{10} = 0.6 \] (iv) \( \frac{9}{250} \) Here \( \gcd(9, 250) = 1 \), so the fraction is already in lowest terms. Prime factorisation of the denominator: \[ 250 = 2^{1} \times 5^{3} \] Since 250 has only 2 and 5 as prime factors, the decimal expansion terminates. Verification: \[ \frac{9}{250} = \frac{9 \times 2^{2}}{2^{3} \times 5^{3}} = \frac{36}{1000} = 0.036 \] Conclusion: The denominator q (after reducing to lowest terms) must be expressible in the form \( 2^{m} \times 5^{n} \) where m and n are non-negative integers, for the decimal expansion to terminate.

Answer: Terminating: (i) 17/40 = 0.425, (iii) 21/35 = 3/5 = 0.6, (iv) 9/250 = 0.036. Non-terminating: (ii) 11/12. The denominator (in lowest terms) must be of the form 2^m × 5^n.

Example 2

Question: A student lists several fractions and claims that a rational number \( \frac{p}{q} \) (with \( \gcd(p,q) = 1 \)) has a terminating decimal if and only if its denominator satisfies a special property. Investigate the following fractions to discover (or verify) that property. (i) \( \frac{13}{625} \) (ii) \( \frac{7}{15} \) (iii) \( \frac{49}{56} \) (iv) \( \frac{3}{160} \) For each fraction, reduce it to lowest terms, factorise the denominator, and decide whether the decimal expansion terminates. Then state the required property of q.

Solution: We reduce each fraction to lowest terms and factorise the denominator. (i) \( \frac{13}{625} \) Here \( \gcd(13, 625) = 1 \), so the fraction is already in lowest terms. Prime factorisation of the denominator: \[ 625 = 5^{4} \] Only the prime factor 5 appears, so the decimal expansion terminates. Verification: \[ \frac{13}{625} = \frac{13 \times 2^{4}}{5^{4} \times 2^{4}} = \frac{13 \times 16}{10000} = \frac{208}{10000} = 0.0208 \] (ii) \( \frac{7}{15} \) Here \( \gcd(7, 15) = 1 \), so the fraction is already in lowest terms. Prime factorisation of the denominator: \[ 15 = 3 \times 5 \] The prime factor 3 appears (neither 2 nor 5 alone), so the decimal expansion is non-terminating and repeating. Verification: \[ \frac{7}{15} = 0.4666\ldots \] (non-terminating repeating) (iii) \( \frac{49}{56} \) First reduce: \( \gcd(49, 56) = 7 \), so \[ \frac{49}{56} = \frac{7}{8} \] Prime factorisation of the new denominator: \[ 8 = 2^{3} \] Only the prime factor 2 appears, so the decimal expansion terminates. Verification: \[ \frac{7}{8} = \frac{7 \times 5^{3}}{2^{3} \times 5^{3}} = \frac{7 \times 125}{1000} = \frac{875}{1000} = 0.875 \] (iv) \( \frac{3}{160} \) Here \( \gcd(3, 160) = 1 \), so the fraction is already in lowest terms. Prime factorisation of the denominator: \[ 160 = 2^{5} \times 5^{1} \] Only the prime factors 2 and 5 appear, so the decimal expansion terminates. Verification: \[ \frac{3}{160} = \frac{3 \times 5^{4}}{2^{5} \times 5^{5}} = \frac{3 \times 625}{100000} = \frac{1875}{100000} = 0.01875 \] Conclusion: From all four examples we observe that the decimal expansion of \( \frac{p}{q} \) (with \( \gcd(p,q) = 1 \)) terminates if and only if the denominator q can be written in the form \[ q = 2^{m} \times 5^{n} \] where m and n are non-negative integers. If q has any other prime factor, the decimal is non-terminating repeating.

Answer: Terminating: (i) 13/625 = 0.0208, (iii) 49/56 = 7/8 = 0.875, (iv) 3/160 = 0.01875. Non-terminating: (ii) 7/15. Required property: q (in lowest terms) must equal 2^m × 5^n for non-negative integers m and n.

🎯 Try a Similar Question

Try a Similar Question

Question: Consider the following fractions, each already in its lowest terms: \( \frac{7}{8} \), \( \frac{3}{25} \), \( \frac{11}{40} \), \( \frac{5}{12} \), \( \frac{9}{35} \). (i) Write the decimal expansion of each fraction and state whether it terminates or not. (ii) By examining the prime factorisation of each denominator, identify which fractions give a terminating decimal and which do not. What pattern do you observe in the denominators of the terminating decimals?

Solution

  1. Step 1: Prime-factorise each denominator: Write each denominator as a product of prime factors. Denominator of \( \frac{7}{8} \): \[ 8 = 2^{3} \] Denominator of \( \frac{3}{25} \): \[ 25 = 5^{2} \] Denominator of \( \frac{11}{40} \): \[ 40 = 2^{3} \times 5 \] Denominator of \( \frac{5}{12} \): \[ 12 = 2^{2} \times 3 \] Denominator of \( \frac{9}{35} \): \[ 35 = 5 \times 7 \]
  2. Step 2: Compute the decimal expansion of each fraction: Divide numerator by denominator for each fraction. For \( \frac{7}{8} \): \[ \frac{7}{8} = 0.875 \] This terminates. For \( \frac{3}{25} \): \[ \frac{3}{25} = 0.12 \] This terminates. For \( \frac{11}{40} \): \[ \frac{11}{40} = 0.275 \] This terminates. For \( \frac{5}{12} \): \[ \frac{5}{12} = 0.41666\ldots \] This is non-terminating (repeating). For \( \frac{9}{35} \): \[ \frac{9}{35} = 0.25714285\ldots \] This is non-terminating (repeating).
  3. Step 3: Verify using denominator structure: A fraction in lowest terms has a terminating decimal exactly when its denominator has no prime factor other than 2 or 5. For \( \frac{7}{8} \): denominator \( = 2^{3} \) — only the prime 2, so it terminates. For \( \frac{3}{25} \): denominator \( = 5^{2} \) — only the prime 5, so it terminates. For \( \frac{11}{40} \): denominator \( = 2^{3} \times 5 \) — only primes 2 and 5, so it terminates. For \( \frac{5}{12} \): denominator \( = 2^{2} \times 3 \) — contains the prime 3 (other than 2 or 5), so it does NOT terminate. For \( \frac{9}{35} \): denominator \( = 5 \times 7 \) — contains the prime 7 (other than 2 or 5), so it does NOT terminate. These results are consistent with the decimal expansions found in Step 2.
  4. Step 4: Convert terminating decimals to confirm (optional verification): We can verify by converting each terminating fraction to have a denominator that is a power of 10. For \( \frac{7}{8} \): multiply numerator and denominator by \( 5^{3} = 125 \): \[ \frac{7 \times 125}{8 \times 125} = \frac{875}{1000} = 0.875 \] For \( \frac{3}{25} \): multiply by \( 2^{2} = 4 \): \[ \frac{3 \times 4}{25 \times 4} = \frac{12}{100} = 0.12 \] For \( \frac{11}{40} \): multiply by \( 5^{2} = 25 \): \[ \frac{11 \times 25}{40 \times 25} = \frac{275}{1000} = 0.275 \] In each case, the denominator became a power of 10, confirming termination.
  5. Step 5: State the observed pattern: From the examples above, the pattern is clear: among the five fractions, only \( \frac{7}{8} \), \( \frac{3}{25} \), and \( \frac{11}{40} \) have terminating decimal expansions. Their denominators — \( 2^{3} \), \( 5^{2} \), and \( 2^{3} \times 5 \) — are built entirely from the primes 2 and 5. The fractions \( \frac{5}{12} \) and \( \frac{9}{35} \) have denominators containing the extra primes 3 and 7 respectively, giving non-terminating repeating decimals.

Answer: The fractions \( \frac{7}{8} \), \( \frac{3}{25} \), and \( \frac{11}{40} \) have terminating decimal expansions (0.875, 0.12, and 0.275 respectively), while \( \frac{5}{12} \) and \( \frac{9}{35} \) have non-terminating repeating decimal expansions. The observed pattern is: a fraction in lowest terms gives a terminating decimal when its denominator is composed only of the primes 2 and 5 (i.e. of the form \( 2^{m} \times 5^{n} \)); the moment any other prime (such as 3 or 7) appears in the denominator, the decimal does not terminate.

Everything you get with Solver7

More questions in Number Systems