SOLVER7 Study. Nothing Else.
Exercise 1.3 Q1(v)

Write the following in decimal form and say what kind of decimal expansion each has : \(\dfrac{2}{11}\)

CBSE Class 9 Maths · Number Systems

Solution

👶 Simple Explanation

Simple Explanation

Imagine you are trying to share 2 cookies equally among 11 friends. No matter how many tiny pieces you cut, you can never finish perfectly. When we write \( \frac{2}{11} \) as a decimal, the digits 1 and 8 keep repeating forever like a pattern that never stops. This is called a recurring decimal. The digits do not go on randomly — the same block just keeps coming back, like a song stuck on repeat. So \( \frac{2}{11} \) never ends, but it follows a neat, predictable pattern.

Answer: \( \frac{2}{11} = 0.181818... = 0.\overline{18} \), which is a non-terminating recurring (repeating) decimal expansion.

📖 Decimal Expansion of 2/11

Detailed Explanation

Every rational number \( \frac{p}{q} \) (with \( q \ne 0 \)) has a decimal expansion that is either terminating or non-terminating recurring (repeating). A terminating decimal ends after a finite number of digits, while a non-terminating recurring decimal has a block of digits that keeps repeating forever. To find the decimal form of \( \frac{2}{11} \), we perform long division of \( 2 \) by \( 11 \). If at some stage the remainder becomes \( 0 \), the decimal terminates; if a remainder repeats, the digits start repeating and the decimal is non-terminating recurring.

Formula Used

A rational number \( \frac{p}{q} \) has a decimal expansion that is either terminating or non-terminating recurring. Long division: \( \text{Dividend} = \text{Divisor} \times \text{Quotient} + \text{Remainder} \).

Solution

  1. Step 1: Set up the long division of \( 2 \div 11 \). Since \( 2 \) is smaller than \( 11 \), the whole-number part is \( 0 \). We write \( 0. \) and continue by bringing down zeros.
  2. Step 2: Divide \( 20 \) by \( 11 \). It goes \( 1 \) time: \( 11 \times 1 = 11 \), and the remainder is \( 20 - 11 = 9 \). So the first decimal digit is \( 1 \).
  3. Step 3: Bring down another \( 0 \) to make \( 90 \). Divide \( 90 \) by \( 11 \). It goes \( 8 \) times: \( 11 \times 8 = 88 \), and the remainder is \( 90 - 88 = 2 \). So the next decimal digit is \( 8 \).
  4. Step 4: Notice the remainder is now \( 2 \), which is the same as our original dividend. This means the whole process will repeat: we will again get digit \( 1 \) then digit \( 8 \), and so on. So the block \( 18 \) repeats endlessly.
  5. Step 5: Writing the result: \( \frac{2}{11} = 0.181818... \). Since the block \( 18 \) repeats without ever giving remainder \( 0 \), the decimal is non-terminating and recurring.

Final Answer

\( \frac{2}{11} = 0.181818... = 0.\overline{18} \), which is a non-terminating recurring (repeating) decimal expansion.

Common Mistake

A common mistake is to round off after a few digits and call it terminating, for example writing \( 0.18 \) and stopping. The division never gives a remainder of \( 0 \); the block \( 18 \) keeps repeating, so it must be classified as non-terminating recurring, not terminating.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Set up the division: we need to divide \( 2 \) by \( 11 \). Since \( 2 < 11 \), the whole-number part of the answer is \( 0 \), so we write \( 0. \) and attach a zero to make \( 20 \). — Reason: When the dividend is smaller than the divisor, the integer part is zero and we must use decimal places to continue the division.
  2. Step 2: Divide \( 20 \) by \( 11 \): \( 11 \times 1 = 11 \), so the first decimal digit is \( 1 \). Subtract to find the remainder: \( 20 - 11 = 9 \). — Reason: We check how many times \( 11 \) fits into \( 20 \) without exceeding it, which gives the next digit of the quotient.
  3. Step 3: Bring down a zero to the remainder \( 9 \) to make \( 90 \). Divide \( 90 \) by \( 11 \): \( 11 \times 8 = 88 \), so the next decimal digit is \( 8 \). Subtract to find the new remainder: \( 90 - 88 = 2 \). — Reason: Appending a zero to the remainder lets us extract the next decimal digit, just as in ordinary long division.
  4. Step 4: Observe that the new remainder is \( 2 \), which is exactly the same as the original dividend. — Reason: A repeated remainder means the entire cycle of division steps will now repeat identically, so the decimal digits must also repeat in the same pattern.
  5. Step 5: Since the remainder \( 2 \) repeats, the digits \( 1 \) and \( 8 \) will keep alternating forever, giving \( 0.181818\ldots \), written compactly as \( 0.\overline{18} \). — Reason: The bar notation \( \overline{18} \) indicates that the block \( 18 \) repeats without end, which is the standard way to express a non-terminating recurring decimal.
  6. Step 6: Conclusion: since the remainder never becomes \( 0 \) but instead cycles back to \( 2 \) repeatedly, the decimal does not terminate. Therefore \( \frac{2}{11} = 0.\overline{18} \) is a non-terminating recurring decimal. — Reason: A zero remainder would signal termination; a repeating remainder confirms the decimal is recurring.

Final Answer

\( \frac{2}{11} = 0.181818... = 0.\overline{18} \), which is a non-terminating recurring (repeating) decimal expansion.

Common Mistake

One common mistake: students stop the long division after one or two decimal places and incorrectly call it a terminating decimal — always continue dividing until you either get a remainder of \( 0 \) (terminating) or see a remainder that has appeared before (recurring).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Long division: \ 2 \div 11 \Rightarrow whole part = 0, carry forward with zeros.
  2. Step 2: 20 \div 11 = 1 remainder 9; \ 90 \div 11 = 8 remainder 2.
  3. Step 3: Remainder 2 repeats the original dividend, so the block 18 repeats: \ \frac{2}{11} = 0.\overline{18}.

Answer: \( \frac{2}{11} = 0.181818... = 0.\overline{18} \), which is a non-terminating recurring (repeating) decimal expansion.

➕ More Examples

More Examples

Example 1

Question: Express \( \dfrac{5}{6} \) in decimal form and state what kind of decimal expansion it has.

Solution: We perform long division of 5 by 6. Step 1 — Set up the division. Since 5 < 6, write 0. and bring up 50. \[ 50 \div 6 = 8 \text{ remainder } 2 \] So the first decimal digit is 8. Step 2 — Bring up the remainder. Now consider 20. \[ 20 \div 6 = 3 \text{ remainder } 2 \] The second decimal digit is 3, and the remainder is again 2. Step 3 — Since the remainder 2 has already appeared, the digit 3 will repeat endlessly. Therefore, the decimal expansion is \( 0.8333\ldots \) or \( 0.8\overline{3} \). The denominator 6 = \( 2 \times 3 \). Because it has 3 as a prime factor (other than 2 or 5), the decimal does NOT terminate. Hence \( \dfrac{5}{6} = 0.8\overline{3} \), which is a non-terminating repeating decimal.

Answer: \( \dfrac{5}{6} = 0.8\overline{3} \) — Non-terminating repeating decimal

Example 2

Question: Express \( \dfrac{7}{16} \) in decimal form and state what kind of decimal expansion it has.

Solution: We perform long division of 7 by 16. Step 1 — Since 7 < 16, write 0. and consider 70. \[ 70 \div 16 = 4 \text{ remainder } 6 \] First decimal digit: 4. Now consider 60. \[ 60 \div 16 = 3 \text{ remainder } 12 \] Second decimal digit: 3. Now consider 120. \[ 120 \div 16 = 7 \text{ remainder } 8 \] Third decimal digit: 7. Now consider 80. \[ 80 \div 16 = 5 \text{ remainder } 0 \] Fourth decimal digit: 5. The remainder is 0, so the division ends. Therefore, the decimal expansion is \( 0.4375 \). The denominator 16 = \( 2^{4} \). It has only 2 as a prime factor, so the decimal terminates. Hence \( \dfrac{7}{16} = 0.4375 \), which is a terminating decimal.

Answer: \( \dfrac{7}{16} = 0.4375 \) — Terminating decimal

🎯 Try a Similar Question

Try a Similar Question

Question: Convert \( \dfrac{5}{13} \) to decimal form using long division and state what kind of decimal expansion it has.

Solution

  1. Step 1: Set up the long division: We divide 5 by 13. Since 5 < 13, we write 0. and consider 50 ÷ 13.
  2. Step 2: Perform the division — first few digits: 50 ÷ 13 = 3 remainder 11 (since \( 13 \times 3 = 39 \), and \( 50 - 39 = 11 \)). Bring down a zero: 110 ÷ 13 = 8 remainder 6 (since \( 13 \times 8 = 104 \), and \( 110 - 104 = 6 \)). Bring down a zero: 60 ÷ 13 = 4 remainder 8 (since \( 13 \times 4 = 52 \), and \( 60 - 52 = 8 \)). Bring down a zero: 80 ÷ 13 = 6 remainder 2 (since \( 13 \times 6 = 78 \), and \( 80 - 78 = 2 \)). Bring down a zero: 20 ÷ 13 = 1 remainder 7 (since \( 13 \times 1 = 13 \), and \( 20 - 13 = 7 \)). Bring down a zero: 70 ÷ 13 = 5 remainder 5 (since \( 13 \times 5 = 65 \), and \( 70 - 65 = 5 \)).
  3. Step 3: Detect the repeating cycle: After the sixth decimal step, the remainder is 5, which is exactly the original numerator. This means the sequence of digits 384615 will now repeat. Hence the decimal is \( 0.384615384615\ldots \)
  4. Step 4: Write using bar notation: The six-digit block 384615 repeats indefinitely, so we write: \[ \frac{5}{13} = 0.\overline{384615} \]
  5. Step 5: State the type of decimal expansion: Because the remainder never becomes 0 and the digits repeat in a fixed block, this is a non-terminating recurring (repeating) decimal expansion.

Answer: \( \dfrac{5}{13} = 0.\overline{384615} \), which is a non-terminating recurring (repeating) decimal expansion with a repeating block of 6 digits.

Everything you get with Solver7

More questions in Number Systems