Form a base-\(2\) place value system using ‘ukasar’ and ‘urapon’ as the digits. Compare this system with that of the Gumulgal’s.
CBSE Class 8 Maths · A Story of Numbers
CBSE Class 8 Maths · A Story of Numbers
Imagine you only have two building blocks: 'urapon' meaning one and 'ukasar' meaning zero. Every number can be built by placing these two words side by side, where each new position to the left is worth double the one before it. The Gumulgal people of Australia also counted things in pairs of two, which is a similar idea. Their way is like grouping pebbles into pairs and counting pairs, but our new word-system is more powerful because each position has its own value that grows by doubling each time.
Answer: Using 'urapon' for \( 1 \) and 'ukasar' for \( 0 \), we get a base-2 place value system where place values are \( 1, 2, 4, 8, \dots \). For example, \( 1 \) is 'urapon', \( 2 \) is 'urapon ukasar', \( 3 \) is 'urapon urapon', \( 4 \) is 'urapon ukasar ukasar', and 'urapon ukasar urapon' equals \( 5 \). Both this system and the Gumulgal system are based on the number \( 2 \), but our system is positional (each place is a power of \( 2 \)), while the Gumulgal method only counts by grouping in pairs and adding, so it has no true place value.
A place value system needs a fixed set of symbols called digits, and the value of each digit depends on its position. In our everyday base-10 (decimal) system we use ten digits from 0 to 9, and each position stands for a power of 10, like ones, tens, hundreds, and so on. In a base-2 system we use only two digits, and each position stands for a power of 2, that is \( 1, 2, 4, 8, 16, \dots \). Here we are told to use the words 'ukasar' and 'urapon' as the two digits. To make a proper place value system, we let 'urapon' stand for \( 1 \) and 'ukasar' stand for \( 0 \). The Gumulgal people (an Australian community) counted using pairs, that is, in twos. Their counting is naturally a base-2 idea, because they group things two at a time. So our constructed system and the Gumulgal system both rest on the number \( 2 \); the difference is that we build a full positional system with two digits, while the Gumulgal method only names small numbers by grouping in pairs.
In base-2, the value of a number is \( d_n \times 2^{n} + \dots + d_2 \times 2^{2} + d_1 \times 2^{1} + d_0 \times 2^{0} \), where each digit \( d \) is either \( 0 \) (ukasar) or \( 1 \) (urapon).
Using 'urapon' for \( 1 \) and 'ukasar' for \( 0 \), we get a base-2 place value system where place values are \( 1, 2, 4, 8, \dots \). For example, \( 1 \) is 'urapon', \( 2 \) is 'urapon ukasar', \( 3 \) is 'urapon urapon', \( 4 \) is 'urapon ukasar ukasar', and 'urapon ukasar urapon' equals \( 5 \). Both this system and the Gumulgal system are based on the number \( 2 \), but our system is positional (each place is a power of \( 2 \)), while the Gumulgal method only counts by grouping in pairs and adding, so it has no true place value.
A common mistake is to treat the words like ordinary base-10 digits and simply add them wherever they appear. In a place value system, position matters: 'urapon ukasar' (which is \( 2 \)) is not the same as 'ukasar urapon' (which is \( 1 \)). Forgetting that each place is a power of \( 2 \) leads to wrong values.
Using 'urapon' for \( 1 \) and 'ukasar' for \( 0 \), we get a base-2 place value system where place values are \( 1, 2, 4, 8, \dots \). For example, \( 1 \) is 'urapon', \( 2 \) is 'urapon ukasar', \( 3 \) is 'urapon urapon', \( 4 \) is 'urapon ukasar ukasar', and 'urapon ukasar urapon' equals \( 5 \). Both this system and the Gumulgal system are based on the number \( 2 \), but our system is positional (each place is a power of \( 2 \)), while the Gumulgal method only counts by grouping in pairs and adding, so it has no true place value.
One common mistake: students sometimes think that any counting method involving the number 2 is automatically a base-2 place value system. Remember, a true place value system requires that the same digit symbol changes its numerical contribution depending on which position it appears in; simply grouping objects into pairs and adding does not create positional (place) value.
Answer: Using 'urapon' for \( 1 \) and 'ukasar' for \( 0 \), we get a base-2 place value system where place values are \( 1, 2, 4, 8, \dots \). For example, \( 1 \) is 'urapon', \( 2 \) is 'urapon ukasar', \( 3 \) is 'urapon urapon', \( 4 \) is 'urapon ukasar ukasar', and 'urapon ukasar urapon' equals \( 5 \). Both this system and the Gumulgal system are based on the number \( 2 \), but our system is positional (each place is a power of \( 2 \)), while the Gumulgal method only counts by grouping in pairs and adding, so it has no true place value.
Question: An imaginary tribe uses a base-2 place value system with only two symbols: 'mika' (representing 0) and 'sola' (representing 1). (a) Write the tribal number 'sola sola mika sola' in our decimal (base-10) system. (b) Write the decimal number 13 in the tribal system. (c) A second tribe uses the same base-2 system but calls the digits 'lo' (for 0) and 'hi' (for 1). Compare the two tribal systems mathematically.
Solution: Part (a): Converting 'sola sola mika sola' to decimal. Replace the symbols: sola = 1, mika = 0. Reading left to right, the four-digit binary number is 1 1 0 1. Assign place values (right to left, starting from 2^0): The rightmost digit has place value \( 2^0 \), next has \( 2^1 \), then \( 2^2 \), then \( 2^3 \). \[ 1 \times 2^3 + 1 \times 2^2 + 0 \times 2^1 + 1 \times 2^0 \] \[ = 1 \times 8 + 1 \times 4 + 0 \times 2 + 1 \times 1 \] \[ = 8 + 4 + 0 + 1 = 13 \] So 'sola sola mika sola' equals 13 in decimal. Part (b): Converting 13 to the tribal system. Repeatedly divide 13 by 2 and record remainders: \( 13 \div 2 = 6 \) remainder 1 \( 6 \div 2 = 3 \) remainder 0 \( 3 \div 2 = 1 \) remainder 1 \( 1 \div 2 = 0 \) remainder 1 Reading remainders from bottom to top: 1, 1, 0, 1. In binary: \( 1101 \). In the tribal system: sola = 1, mika = 0, so 1101 is written as 'sola sola mika sola'. Part (c): Comparison of the two tribal systems. Both tribes use exactly two distinct symbols to represent the two digits of a base-2 (binary) system. The first tribe uses 'mika' for 0 and 'sola' for 1; the second tribe uses 'lo' for 0 and 'hi' for 1. Mathematically, both systems are identical: both are base-2 systems where each position represents a power of 2, and only the names of the digits differ. For example, 'sola sola mika sola' (first tribe) and 'hi hi lo hi' (second tribe) both represent the decimal number 13. The structure, place values, and arithmetic rules are the same in both.
Answer: (a) 13 in decimal; (b) 'sola sola mika sola' in the tribal system; (c) Both systems are mathematically identical base-2 systems — only the names of the two digits differ.
Question: A fictional civilisation records numbers in a base-2 system using the symbols 'ek' (for 1) and 'shunya' (for 0). (a) Express the civilisation's number 'ek shunya ek ek shunya' in decimal. (b) Express the decimal number 22 in the civilisation's system. (c) Our modern binary system uses '1' and '0'. How does the civilisation's system compare to our binary system?
Solution: Part (a): Converting 'ek shunya ek ek shunya' to decimal. Replace: ek = 1, shunya = 0. The five-digit binary number is 1 0 1 1 0. Assign place values (right to left): \[ 1 \times 2^4 + 0 \times 2^3 + 1 \times 2^2 + 1 \times 2^1 + 0 \times 2^0 \] \[ = 1 \times 16 + 0 \times 8 + 1 \times 4 + 1 \times 2 + 0 \times 1 \] \[ = 16 + 0 + 4 + 2 + 0 = 22 \] So 'ek shunya ek ek shunya' equals 22 in decimal. Part (b): Converting 22 to the civilisation's system. Repeatedly divide 22 by 2 and record remainders: \( 22 \div 2 = 11 \) remainder 0 \( 11 \div 2 = 5 \) remainder 1 \( 5 \div 2 = 2 \) remainder 1 \( 2 \div 2 = 1 \) remainder 0 \( 1 \div 2 = 0 \) remainder 1 Reading remainders from bottom to top: 1, 0, 1, 1, 0. In binary: \( 10110 \). In the civilisation's system: 1 = ek, 0 = shunya, so 10110 is written as 'ek shunya ek ek shunya'. Part (c): Comparison with modern binary. Modern binary uses the digit symbols '1' and '0'. The civilisation uses 'ek' for 1 and 'shunya' for 0. Both are base-2 systems. In both, the place values are powers of 2: \( 2^0, 2^1, 2^2, 2^3, \ldots \) starting from the rightmost digit. For example, modern binary 10110 and the civilisation's 'ek shunya ek ek shunya' represent the same quantity, namely the decimal number 22. \[ 1 \times 2^4 + 0 \times 2^3 + 1 \times 2^2 + 1 \times 2^1 + 0 \times 2^0 = 22 \] The two systems are mathematically equivalent — they differ only in the written symbols used for the two digits 0 and 1. The place value structure and all arithmetic operations work identically in both.
Answer: (a) 22 in decimal; (b) 'ek shunya ek ek shunya' in the civilisation's system; (c) The civilisation's system is mathematically identical to modern binary — both are base-2 systems with place values as powers of 2, differing only in the names/symbols for the digits 0 and 1.
Question: A tribe uses only two words for counting: 'neeza' (meaning 0) and 'takra' (meaning 1). They arrange these words in a base-2 place value system, where the rightmost position has value \( 1 \), the next has value \( 2 \), then \( 4 \), then \( 8 \), and so on. (i) Write the tribe's words for the numbers 1 through 6 in this system. (ii) What decimal number does the tribe's expression 'takra neeza takra neeza' represent? (iii) How would you write the decimal number 11 in this system?
Answer: (i) 1 = takra; 2 = takra neeza; 3 = takra takra; 4 = takra neeza neeza; 5 = takra neeza takra; 6 = takra takra neeza. (ii) 'takra neeza takra neeza' represents the decimal number \( 10 \), since \( 1 \times 8 + 0 \times 4 + 1 \times 2 + 0 \times 1 = 10 \). (iii) Decimal \( 11 \) in the tribe's system is 'takra neeza takra takra', since \( 1 \times 8 + 0 \times 4 + 1 \times 2 + 1 \times 1 = 11 \).