SOLVER7 Study. Nothing Else.
Figure It Out 8 Q1(iii)

Represent the following numbers in the Mesopotamian system — \(200\)

CBSE Class 8 Maths · A Story of Numbers

Solution

👶 Simple Explanation

Simple Explanation

Long ago, people in Mesopotamia counted in groups of 60, not groups of 10 like we do today. Imagine you have 200 pebbles. You group them into bundles of 60 each. You can make 3 full bundles, and 20 pebbles are left over. The 3 bundles are shown using three little wedge marks. The 20 leftover pebbles are shown using two corner symbols, each standing for ten. So the number 200 looks like three wedges followed by two corner marks in their writing.

Answer: In the Mesopotamian base-60 system, \( 200 = (3 \times 60) + 20 \), written as the digits \( 3 , 20 \): three unit wedges (| | |) for the 60s place, followed by two corner/ten symbols (< <) for 20 in the units place.

📖 Representing 200 in the Mesopotamian (Babylonian) System

Detailed Explanation

The Mesopotamians (Babylonians) used a base-60 (sexagesimal) number system. This is different from our modern base-10 (decimal) system. In their system there were two basic symbols: a wedge-shaped mark for 1 (written as a vertical wedge) and a corner or hook-shaped mark for 10. Numbers from 1 to 59 were written by repeating these two symbols as needed, just like tally marks. Because the base is 60, place values go up in powers of 60. The rightmost place is the units place (values 0 to 59), the next place to the left is worth 60, the next 3600, and so on. So to write a number, we ask how many 60s fit into it and what is left over.

Formula Used

In base 60: a number N is written as \( N = (a \times 60) + b \), where \( b \) is the units part \( (0 \le b < 60) \) and \( a \) is the number of 60s. Symbols: unit wedge = 1, corner symbol = 10.

Solution

  1. Step 1: Recall that the Mesopotamian system is base 60. So we must break 200 into a whole number of 60s plus a remainder that is less than 60.
  2. Step 2: Divide 200 by 60 to find how many 60s it contains. \[ 200 \div 60 = 3 \text{ remainder } 20 \] This means \[ 200 = (3 \times 60) + 20 \]
  3. Step 3: Interpret the result in place-value form. The 60s place holds 3, and the units place holds 20. So in base 60, 200 is written as the two 'digits' 3 and 20, i.e. \( 3 , 20 \).
  4. Step 4: Now write each part using Mesopotamian symbols. The 60s place value is 3, so we write three unit wedges (three marks each meaning 1). In plain description: | | | for 3.
  5. Step 5: The units place value is 20, which is \( 2 \times 10 \). Since 10 is shown by a corner symbol, we write two corner symbols. In plain description: < < for 20.
  6. Step 6: Put the two groups side by side, higher place on the left, units on the right: (three unit wedges) then a gap, then (two corner symbols). This whole grouping represents \( (3 \times 60) + 20 = 200 \).

Final Answer

In the Mesopotamian base-60 system, \( 200 = (3 \times 60) + 20 \), written as the digits \( 3 , 20 \): three unit wedges (| | |) for the 60s place, followed by two corner/ten symbols (< <) for 20 in the units place.

Common Mistake

A common mistake is to treat the Mesopotamian system as base 10 and try to write 200 directly with the ten-symbols, instead of first splitting 200 into 60s and a remainder. Always divide by 60 first, since their place values increase in powers of 60, not 10.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Recognise that the Mesopotamian system uses base 60, not base 10. — Reason: Unlike our everyday decimal system where each place is worth 10 times the one before, in this ancient system each new place is worth 60 times the one before, so we must split our number into groups of 60 rather than groups of 10.
  2. Step 2: Divide 200 by 60 to find how many complete 60s fit inside it: \[ 200 \div 60 = 3 \text{ remainder } 20 \] — Reason: Integer division tells us the digit for the 60s place (the quotient, 3) and the digit for the units place (the remainder, 20). This is the core conversion step.
  3. Step 3: Rewrite the result as a place-value equation: \[ 200 = (3 \times 60) + 20 \] — Reason: Expressing the number this way makes it clear that 3 belongs in the 60s place and 20 belongs in the units place, exactly as digits are arranged in the Mesopotamian notation.
  4. Step 4: Identify the two base-60 digits: the 60s-place digit is \( 3 \) and the units-place digit is \( 20 \). In Mesopotamian notation this pair is written as \( 3 , 20 \). — Reason: Just as we write the decimal number 35 with digit 3 in the tens place and digit 5 in the units place, the Mesopotamians wrote their digits side by side from left (highest place) to right (lowest place).
  5. Step 5: Convert the 60s-place digit (3) into Mesopotamian symbols. Since each unit wedge represents 1, three unit wedges are needed: | | | — Reason: Numbers 1 through 9 in Mesopotamian script are simply that many repeated unit wedge marks, much like tally marks.
  6. Step 6: Convert the units-place digit (20) into Mesopotamian symbols. Each corner symbol represents 10, so 20 requires two corner symbols: < < — Reason: Instead of writing twenty separate wedges, the scribes used the corner (ten) symbol as a shorthand; two of them give \( 2 \times 10 = 20 \).
  7. Step 7: Combine both groups to form the complete Mesopotamian representation of 200: three unit wedges (| | |) for the 60s place, followed by two corner symbols (< <) for the units place. — Reason: Placing the higher-place group first (left) and the lower-place group second (right) follows the same left-to-right convention used in modern positional notation.

Final Answer

In the Mesopotamian base-60 system, \( 200 = (3 \times 60) + 20 \), written as the digits \( 3 , 20 \): three unit wedges (| | |) for the 60s place, followed by two corner/ten symbols (< <) for 20 in the units place.

Common Mistake

One common mistake: students divide by 10 instead of 60, writing 200 as 2 groups of 100 — always remember that the Mesopotamian base is 60, so every division and remainder must use 60 as the divisor.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Divide 200 by 60: \[ 200 \div 60 = 3 \text{ remainder } 20 \]
  2. Step 2: Express in base-60 place values: \[ 200 = (3 \times 60) + 20 \] so the 60s digit is 3 and the units digit is 20.
  3. Step 3: Write in Mesopotamian symbols: 60s place = 3 unit wedges (| | |); units place = 20 = two corner/ten symbols (< <).

Answer: In the Mesopotamian base-60 system, \( 200 = (3 \times 60) + 20 \), written as the digits \( 3 , 20 \): three unit wedges (| | |) for the 60s place, followed by two corner/ten symbols (< <) for 20 in the units place.

➕ More Examples

More Examples

Example 1

Question: Represent 155 in the Mesopotamian (Babylonian) number system.

Solution: We need to express 155 in the base-60 system. Divide 155 by 60: \[155 = 60 \times 2 + 35\] So the quotient is 2 and the remainder is 35. The 60s place value is 2, which is written as: YY The units place value is 35. Now, \(35 = 3 \times 10 + 5\), so it is written as: <<

Answer: YY <<

Example 2

Question: Represent 432 in the Mesopotamian (Babylonian) number system.

Solution: We need to express 432 in the base-60 system. Divide 432 by 60: \[432 = 60 \times 7 + 12\] So the quotient is 7 and the remainder is 12. The 60s place value is 7, which is written as: YYYYYYY The units place value is 12. Now, \(12 = 1 \times 10 + 2\), so it is written as:

Answer: YYYYYYY

🎯 Try a Similar Question

Try a Similar Question

Question: Represent the number 155 in the Mesopotamian (Babylonian) base-60 number system. Show the division step clearly and describe the wedge symbols used.

Solution

  1. Step 1: Divide 155 by 60 to find the place values: Divide 155 by 60: \[ 155 = 2 \times 60 + 35 \] So the quotient is 2 (this goes in the 60s place) and the remainder is 35 (this goes in the units place).
  2. Step 2: Interpret the 60s place digit: The 60s place digit is 2. In the Mesopotamian system, each unit is shown by a vertical wedge symbol |. So the value 2 in the 60s place is written as two vertical wedges: | |
  3. Step 3: Interpret the units place digit: The units place digit is 35. In the Mesopotamian system, tens are shown by a corner (ten) symbol < and ones by a vertical wedge |. Since \( 35 = 3 \times 10 + 5 \), the units place is written as three ten-symbols and five unit-wedges: < < < | | | | |
  4. Step 4: Write the full Mesopotamian representation: Combining both places, the Mesopotamian representation of 155 is: two vertical wedges for the 60s place, followed by three corner symbols and five vertical wedges for the units place. In shorthand digit form this is written as the pair (2, 35), meaning \( 2 \times 60 + 35 = 155 \).

Answer: In the Mesopotamian base-60 system, \( 155 = (2 \times 60) + 35 \), written as the digits (2, 35): two unit wedges (| |) for the 60s place, followed by three ten-symbols and five unit wedges (< < < | | | | |) for the value 35 in the units place.

Everything you get with Solver7

More questions in A Story of Numbers