Detailed Explanation
A sector of a circle is the region enclosed by two radii and the arc between them. The arc is a part of the circumference of the circle. If the angle at the centre (the central angle) is \(\theta\) degrees and the radius is r, then the arc length is a fraction \(\dfrac{\theta}{360^\circ}\) of the full circumference \(2\pi r\). In this figure there are two sectors sharing the same centre O and the same central angle \(60^\circ\), but with different radii (7 cm and 21 cm). So we simply apply the arc length formula twice.
Formula Used
\[ \text{Length of arc} = \dfrac{\theta}{360^\circ} \times 2\pi r \]
Solution
- Step 1: Note the given data: For arc RXQ: radius \(OR = 7\) cm, central angle \(\angle ROQ = 60^\circ\). For arc MYN: radius \(OM = 21\) cm, central angle \(\angle MON = 60^\circ\). Use \(\pi = \dfrac{22}{7}\).
- Step 2: Length of arc RXQ: Apply the formula with \(r = 7\) and \(\theta = 60^\circ\): \[ \text{arc RXQ} = \dfrac{60}{360} \times 2 \times \dfrac{22}{7} \times 7 \] Simplify \(\dfrac{60}{360} = \dfrac{1}{6}\) and \(\dfrac{22}{7} \times 7 = 22\): \[ \text{arc RXQ} = \dfrac{1}{6} \times 2 \times 22 = \dfrac{44}{6} = \dfrac{22}{3} \text{ cm} \] So arc RXQ \(= \dfrac{22}{3}\) cm \(\approx 7.33\) cm.
- Step 3: Length of arc MYN: Apply the formula with \(r = 21\) and \(\theta = 60^\circ\): \[ \text{arc MYN} = \dfrac{60}{360} \times 2 \times \dfrac{22}{7} \times 21 \] Simplify \(\dfrac{60}{360} = \dfrac{1}{6}\) and \(\dfrac{22}{7} \times 21 = 66\): \[ \text{arc MYN} = \dfrac{1}{6} \times 2 \times 66 = \dfrac{132}{6} = 22 \text{ cm} \] So arc MYN \(= 22\) cm.
- Step 4: Observation: Notice that when the radius becomes 3 times bigger (from 7 to 21), the arc length also becomes 3 times bigger (from \(\dfrac{22}{3}\) to 22). This is because the angle is the same for both sectors, so arc length is directly proportional to the radius.
Final Answer
Length of arc RXQ \(= \dfrac{22}{3}\) cm \(\approx 7.33\) cm; Length of arc MYN \(= 22\) cm.
Common Mistake
A very common mistake is to forget the factor \(\dfrac{\theta}{360}\) and just compute \(2\pi r\) (the whole circumference), or to use the area formula \(\dfrac{\theta}{360}\times \pi r^2\) instead of the arc length formula. Always remember: arc length uses \(2\pi r\), not \(\pi r^2\).