SOLVER7 Study. Nothing Else.
Chapter 13 Examples Q2

The adjoining figure shows the measures of a Joker’s cap. How much cloth is needed to make such a cap\(?\)

MAH STATE BOARD Mah SB Class 10 Maths · Mensuration

Solution

👶 Simple Explanation

Simple Explanation

Think of a joker's party hat. It is shaped like an ice cream cone. The cloth used to make it covers only the outside, curved part — not the bottom circle. Imagine peeling that curved surface off and laying it flat. The amount of cloth needed equals the area of that curved part. For this hat, the radius is \( 10 \) cm and the slant side is \( 21 \) cm. Multiplying these with \( \pi \) gives the cloth area. The answer comes out to \( 660 \) square centimetres.

Answer: Cloth required to make the cap \( = 660 \ \text{cm}^2 \).

📖 Cloth Required for a Joker's Cap

Detailed Explanation

A Joker's cap has the shape of a cone with an open base (no bottom circle). The cloth used to make such a cap forms only the curved (lateral) surface of the cone. So we need to find the Curved Surface Area (CSA) of the cone, not the Total Surface Area. From the figure, the slant height \( l = 21 \) cm and the base radius \( r = 10 \) cm (since 10 cm is shown as the diameter-like measurement... actually it is the radius as labelled from centre to edge in the figure).

Formula Used

Curved Surface Area of a cone \( = \pi r l \), where \( r \) is the base radius and \( l \) is the slant height.

Solution

  1. Step 1: Identify the given values: From the figure: radius of the base \( r = 10 \) cm and slant height \( l = 21 \) cm. Since the cap is open at the bottom, we only need the curved surface area.
  2. Step 2: Write the formula: Cloth required = Curved Surface Area of cone \[ CSA = \pi r l \]
  3. Step 3: Substitute the values: Using \( \pi = \dfrac{22}{7} \): \[ CSA = \dfrac{22}{7} \times 10 \times 21 \]
  4. Step 4: Simplify: First simplify \( \dfrac{21}{7} = 3 \): \[ CSA = 22 \times 10 \times 3 \] \[ CSA = 660 \text{ cm}^2 \]
  5. Step 5: State the result: So the cloth required to make the Joker's cap is \( 660 \) cm\(^2\).

Final Answer

Cloth required to make the cap \( = 660 \ \text{cm}^2 \).

Common Mistake

A common mistake is to use the Total Surface Area formula \( \pi r(l + r) \) instead of the Curved Surface Area \( \pi r l \). Since the cap is open at the base (no circular bottom), only the curved surface is covered with cloth.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Read off the measurements from the figure: base radius \( r = 10 \) cm and slant height \( l = 21 \) cm. — Reason: We must identify all given values before applying any formula.
  2. Step 2: Decide which area formula to use. Because the cap is open at the base, the circular bottom does not need any cloth. Only the lateral (curved) surface requires cloth, so we use the Curved Surface Area formula and NOT the Total Surface Area. — Reason: Using TSA would incorrectly add the area of the open base circle.
  3. Step 3: Write the formula with the known values substituted, using \( \pi = \dfrac{22}{7} \): \[ CSA = \dfrac{22}{7} \times 10 \times 21 \] — Reason: Substituting before simplifying keeps the working organised and avoids errors.
  4. Step 4: Simplify \( \dfrac{21}{7} \) first to get \( 3 \), so the expression becomes \[ CSA = 22 \times 10 \times 3 \] — Reason: Cancelling the 7 with 21 reduces the numbers to smaller, easier values before multiplying.
  5. Step 5: Multiply the remaining numbers: \( 22 \times 10 = 220 \), then \( 220 \times 3 = 660 \). Therefore \[ CSA = 660 \text{ cm}^2 \] — Reason: Completing the multiplication gives us the final numerical answer.

Final Answer

Cloth required to make the cap \( = 660 \ \text{cm}^2 \).

Common Mistake

One common mistake: Students mistakenly use the Total Surface Area formula \( \pi r l + \pi r^2 \) and add the base circle's area, but since the cap is open at the bottom, that base circle is not covered by cloth and must not be included.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( r = 10 \) cm, \( l = 21 \) cm
  2. Step 2: Cloth required \( = \pi r l = \dfrac{22}{7} \times 10 \times 21 \)
  3. Step 3: \[ = 22 \times 10 \times 3 = 660 \text{ cm}^2 \]

Answer: Cloth required to make the cap \( = 660 \ \text{cm}^2 \).

➕ More Examples

More Examples

Example 1

Question: A conical birthday cap has a base diameter of 14 cm and a vertical height of 24 cm. Find the area of the coloured sheet required to make one such cap. (Use \( \pi = \frac{22}{7} \))

Solution: Step 1 — Find the base radius. The diameter is 14 cm, so the radius is \( r = \frac{14}{2} = 7 \) cm. Step 2 — Find the slant height. Using the Pythagorean theorem: \[ l = \sqrt{r^2 + h^2} = \sqrt{7^2 + 24^2} \] \[ l = \sqrt{49 + 576} = \sqrt{625} = 25 \text{ cm} \] Step 3 — Calculate the Curved Surface Area. \[ \text{CSA} = \pi r l = \frac{22}{7} \times 7 \times 25 \] \[ \text{CSA} = 22 \times 25 = 550 \text{ cm}^2 \] Therefore, the area of coloured sheet required is 550 cm².

Answer: 550 cm²

Example 2

Question: A circus performer's conical hat has a slant height of 35 cm and a base circumference of 66 cm. Find the amount of fabric needed to stitch the hat. (Use \( \pi = \frac{22}{7} \))

Solution: Step 1 — Find the base radius from the circumference. The circumference is \( 2\pi r = 66 \) cm. \[ r = \frac{66}{2\pi} = \frac{66 \times 7}{2 \times 22} = \frac{462}{44} = 10.5 \text{ cm} \] Step 2 — The slant height is already given: \( l = 35 \) cm. Step 3 — Calculate the Curved Surface Area. \[ \text{CSA} = \pi r l = \frac{22}{7} \times 10.5 \times 35 \] \[ \text{CSA} = \frac{22}{7} \times 367.5 \] \[ \text{CSA} = 22 \times 52.5 = 1155 \text{ cm}^2 \] Therefore, the fabric needed to stitch the hat is 1155 cm².

Answer: 1155 cm²

🎯 Try a Similar Question

Try a Similar Question

Question: A party cap is in the shape of a cone. The base diameter of the cap is 14 cm and its slant height is 25 cm. How much cloth (in cm²) is needed to make such a cap? (Use \( \pi = \dfrac{22}{7} \))

Solution

  1. Step 1: Identify the given values: Base diameter = 14 cm, so base radius \( r = \dfrac{14}{2} = 7 \) cm. Slant height \( l = 25 \) cm.
  2. Step 2: Write the formula for curved surface area: The cloth needed equals the curved surface area (CSA) of the cone. \[ \text{CSA} = \pi r l \]
  3. Step 3: Substitute the values: Substituting \( \pi = \dfrac{22}{7} \), \( r = 7 \) cm, and \( l = 25 \) cm: \[ \text{CSA} = \frac{22}{7} \times 7 \times 25 \]
  4. Step 4: Simplify the calculation: \[ \text{CSA} = 22 \times 25 = 550 \text{ cm}^2 \]
  5. Step 5: State the answer: The cloth required to make the cap is \( 550 \text{ cm}^2 \).

Answer: Cloth required to make the cap \( = 550 \ \text{cm}^2 \).

Everything you get with Solver7

More questions in Mensuration

Chapter 13 Examples Q1 Practice Set 13.1 Q1 Practice Set 13.2 Q1 Practice Set 13.3 Q1 Practice Set 13.4 Q1 Problem Set 13 Q1 (i) 03/2018 2018 / Question 2 Q1 03/2018 2018 / Question 3 Q1 (i) 03/2019 2019 / Question 4 Q1 Practice Set 13.1 Q2 Practice Set 13.2 Q2 (i) Practice Set 13.3 Q2 Practice Set 13.4 Q2 Problem Set 13 Q1 (ii) 03/2018 2018 / Question 3 Q1 (ii) 03/2019 2019 / Question 6 Q2 04/2019 2019 / Question 1 QA (ii) N397 2024 / Question 3 QA (ii) N632 2024 / Question 4 Q2 N697 2025 / Question 5 Q2 N932 2026 / Question 4 Q2 Chapter 13 Examples Q3 Practice Set 13.1 Q3 Practice Set 13.2 Q2 (ii) Practice Set 13.3 Q3 Practice Set 13.4 Q3 Problem Set 13 Q1 (iii) 03/2018 2018 / Question 1 Q3 03/2018 2018 / Question 3 Q1 (iii) 03/2018 2018 / Question 5 Q3 03/2019 2019 / Question 3 QA (iii) N397 2024 / Question 2 QA (iii) N397 2026 / Question 4 Q3 N632 2024 / Question 2 QA (iii) N926 2023 / Question 2 QA (iii) N926 2023 / Question 4 Q3 N932 2026 / Question 2 QA (iii) Chapter 13 Examples Q4 Practice Set 13.1 Q4 Practice Set 13.2 Q2 (iii) Practice Set 13.3 Q4 Practice Set 13.4 Q4 Problem Set 13 Q1 (iv) N397 2024 / Question 1 QA (iv) N632 2024 / Question 2 QB (i) N697 2025 / Question 1 QA (iv) N832 2025 / Question 1 QA (iv) N832 2025 / Question 4 Q3 (i) N926 2023 / Question 1 QA (iv) N932 2026 / Question 1 QA (iv) Chapter 13 Examples Q5 Practice Set 13.1 Q5 Practice Set 13.2 Q3 Practice Set 13.3 Q5 Practice Set 13.4 Q5 Problem Set 13 Q1 (v) 03/2018 2018 / Question 2 Q5 N697 2025 / Question 2 QB (ii) N832 2025 / Question 4 Q3 (ii) Practice Set 13.1 Q6