SOLVER7 Study. Nothing Else.
Practice Set 13.3 Q6 (iii)

In the figure \(7.31,\) radius of the circle is \(7\ cm\) and \(m(arc\ MBN)=60^\circ,\) find \(A(O - MCN) .\)

MAH STATE BOARD Mah SB Class 10 Maths · Mensuration

Solution

👶 Simple Explanation

Simple Explanation

Imagine a pie cut into 360 tiny equal slices. A small piece is already cut away — that piece uses up only 60 slices. The big leftover piece uses the remaining 300 slices. Now, our circle has a radius of 7 cm. The big piece (called a major sector) is 300 out of 360 parts of the whole circle. We find the area of the whole circle and take just that big chunk. That gives us the answer: roughly 128 square centimetres for the large shaded region.

Answer: \[ A(O\text{-}MCN) = \frac{385}{3}\ \text{cm}^2 \approx 128.33\ \text{cm}^2 \]

📖 Area of Sector O-MCN

Detailed Explanation

A sector is the region bounded by two radii and the arc between them. In the given figure, the circle has centre O with radius 7 cm. The minor arc MBN measures 60°, so the major arc MCN (going through point C on top) measures the remaining portion of the full circle. Since a complete circle measures 360°, the measure of the major arc MCN is 360° - 60° = 300°. The area of a sector is a fraction of the total area of the circle, where the fraction is the sector's central angle divided by 360°.

Formula Used

\[ \text{Area of sector} = \frac{\theta}{360^\circ} \times \pi r^2 \]

Solution

  1. Step 1: Identify the measure of arc MCN: The full circle measures \( 360^\circ \) and the minor arc MBN measures \( 60^\circ \). Therefore the major arc MCN is: \[ m(\text{arc MCN}) = 360^\circ - 60^\circ = 300^\circ \] This becomes the central angle of the sector O-MCN.
  2. Step 2: Write the formula for the area of a sector: The area of a sector with central angle \( \theta \) and radius \( r \) is: \[ A = \frac{\theta}{360^\circ} \times \pi r^2 \] Here \( \theta = 300^\circ \), \( r = 7 \) cm, and we use \( \pi = \frac{22}{7} \).
  3. Step 3: Substitute the values: Substituting into the formula: \[ A(O\text{-}MCN) = \frac{300}{360} \times \frac{22}{7} \times 7 \times 7 \]
  4. Step 4: Simplify the expression: Simplify step by step: \[ A = \frac{5}{6} \times \frac{22}{7} \times 49 \] \[ A = \frac{5}{6} \times 22 \times 7 \] \[ A = \frac{5 \times 154}{6} = \frac{770}{6} \]
  5. Step 5: Final calculation: Dividing: \[ A = \frac{770}{6} = 128.33\ \text{cm}^2 \] So the area of the major sector O-MCN is approximately \( 128.33 \) cm\(^2\).

Final Answer

\[ A(O\text{-}MCN) = \frac{385}{3}\ \text{cm}^2 \approx 128.33\ \text{cm}^2 \]

Common Mistake

A common mistake is to use \( 60^\circ \) directly as the central angle for sector O-MCN. Remember, sector O-MCN corresponds to the MAJOR arc (through C), so the angle to use is \( 360^\circ - 60^\circ = 300^\circ \), not \( 60^\circ \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Find the central angle of sector O-MCN. The minor arc MBN subtends \( 60^\circ \) at the centre. Since a full circle spans \( 360^\circ \), the remaining major arc MCN subtends: \[ m(\text{arc MCN}) = 360^\circ - 60^\circ = 300^\circ \] — Reason: The two arcs together must complete the full circle, so we subtract the known minor arc angle from \( 360^\circ \) to get the major arc's central angle.
  2. Step 2: Note down the known values: central angle \( \theta = 300^\circ \), radius \( r = 7 \) cm, and \( \pi = \frac{22}{7} \). — Reason: Listing values before substituting prevents errors and makes the calculation easier to follow.
  3. Step 3: Substitute all values into the sector area formula: \[ A(O\text{-}MCN) = \frac{300}{360} \times \frac{22}{7} \times 7 \times 7 \] — Reason: Plugging \( \theta = 300^\circ \), \( \pi = \frac{22}{7} \), and \( r = 7 \) into \( A = \frac{\theta}{360^\circ} \times \pi r^2 \) sets up the arithmetic we need to simplify.
  4. Step 4: Simplify the angle fraction: \[ \frac{300}{360} = \frac{5}{6} \] So the expression becomes: \[ A = \frac{5}{6} \times \frac{22}{7} \times 49 \] — Reason: Reducing \( \frac{300}{360} \) to lowest terms first keeps the numbers smaller and the next steps cleaner.
  5. Step 5: Cancel \( 7 \) from \( \frac{1}{7} \) and \( 49 = 7 \times 7 \): \[ A = \frac{5}{6} \times 22 \times 7 \] Then multiply \( 22 \times 7 = 154 \): \[ A = \frac{5 \times 154}{6} = \frac{770}{6} \] — Reason: Cancelling common factors before multiplying avoids dealing with unnecessarily large numbers.
  6. Step 6: Reduce \( \frac{770}{6} \) to its simplest form by dividing numerator and denominator by \( 2 \): \[ A = \frac{385}{3} \text{ cm}^2 \] Converting to decimal: \( 385 \div 3 \approx 128.33 \). — Reason: Expressing the answer as a simplified fraction gives an exact result, while the decimal approximation makes the size easy to visualise.

Final Answer

\[ A(O\text{-}MCN) = \frac{385}{3}\ \text{cm}^2 \approx 128.33\ \text{cm}^2 \]

Common Mistake

One common mistake: Students often use the minor arc angle \( 60^\circ \) directly instead of the major arc angle \( 300^\circ \), which gives the area of the smaller sector O-MBN rather than the required larger sector O-MCN.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Central angle of sector O-MCN: \[ \theta = 360^{\circ} - 60^{\circ} = 300^{\circ} \]
  2. Step 2: Substitute \( \theta = 300^{\circ} \), \( r = 7 \) cm, \( \pi = \frac{22}{7} \): \[ A(O\text{-}MCN) = \frac{300}{360} \times \frac{22}{7} \times 7 \times 7 \]
  3. Step 3: Simplify: \[ A = \frac{5}{6} \times 22 \times 7 = \frac{770}{6} = \frac{385}{3} \]

Answer: \[ A(O\text{-}MCN) = \frac{385}{3}\ \text{cm}^2 \approx 128.33\ \text{cm}^2 \]

➕ More Examples

More Examples

Example 1

Question: In the figure, the radius of a circle with centre O is 14 cm and \( m(\text{arc PBQ}) = 60^\circ \). Find the area of the major segment O-PCQ (the region bounded by chord PQ and the major arc PCQ).

Solution: Given: radius \( r = 14 \) cm, central angle of minor arc PBQ: \( \theta = 60^\circ \). \nStep 1 — Area of the full circle: \[ A_{\text{circle}} = \pi r^2 = \frac{22}{7} \times 14 \times 14 = 616 \text{ cm}^2 \] \nStep 2 — Area of the minor sector OPQ (angle \( 60^\circ \)): \[ A_{\text{minor sector}} = \frac{60}{360} \times \pi r^2 = \frac{1}{6} \times 616 = \frac{616}{6} = \frac{308}{3} \text{ cm}^2 \] \nStep 3 — Area of triangle OPQ. Since \( OP = OQ = 14 \) cm and \( \angle POQ = 60^\circ \), triangle OPQ is equilateral: \[ A_{\triangle OPQ} = \frac{\sqrt{3}}{4} \times r^2 = \frac{\sqrt{3}}{4} \times 196 = 49\sqrt{3} \text{ cm}^2 \] \nStep 4 — Area of the minor segment (between chord PQ and minor arc PBQ): \[ A_{\text{minor segment}} = A_{\text{minor sector}} - A_{\triangle OPQ} = \frac{308}{3} - 49\sqrt{3} \] \nStep 5 — Area of the major segment O-PCQ equals the full circle area minus the minor sector area, plus the triangle area (since the triangle lies inside the minor sector but outside the minor segment): \[ A_{\text{major segment}} = A_{\text{circle}} - A_{\text{minor sector}} + A_{\triangle OPQ} \] \[ A_{\text{major segment}} = 616 - \frac{308}{3} + 49\sqrt{3} \] \[ = \frac{1848 - 308}{3} + 49\sqrt{3} \] \[ = \frac{1540}{3} + 49\sqrt{3} \] \nUsing \( \sqrt{3} \approx 1.732 \): \[ 49\sqrt{3} \approx 49 \times 1.732 = 84.868 \] \[ A_{\text{major segment}} \approx 513.33 + 84.87 \approx 598.2 \text{ cm}^2 \]

Answer: \( A(\text{O-PCQ}) = \dfrac{1540}{3} + 49\sqrt{3} \approx 598.2 \text{ cm}^2 \)

Example 2

Question: A circle has centre O and radius 21 cm. Arc ADB subtends a central angle of \( 60^\circ \) at O. Find the area of the region O-ACB, which is the major segment (the region enclosed by chord AB and the major arc ACB).

Solution: Given: radius \( r = 21 \) cm, minor arc angle \( \theta = 60^\circ \). \nStep 1 — Area of the full circle: \[ A_{\text{circle}} = \pi r^2 = \frac{22}{7} \times 21 \times 21 = \frac{22}{7} \times 441 = 22 \times 63 = 1386 \text{ cm}^2 \] \nStep 2 — Area of the minor sector OAB (angle \( 60^\circ \)): \[ A_{\text{minor sector}} = \frac{60}{360} \times 1386 = \frac{1}{6} \times 1386 = 231 \text{ cm}^2 \] \nStep 3 — Area of triangle OAB. With \( OA = OB = 21 \) cm and \( \angle AOB = 60^\circ \), the triangle is equilateral: \[ A_{\triangle OAB} = \frac{\sqrt{3}}{4} \times (21)^2 = \frac{\sqrt{3}}{4} \times 441 = \frac{441\sqrt{3}}{4} \text{ cm}^2 \] \nUsing \( \sqrt{3} \approx 1.732 \): \[ A_{\triangle OAB} \approx \frac{441 \times 1.732}{4} = \frac{763.812}{4} \approx 190.95 \text{ cm}^2 \] \nStep 4 — Area of the major segment O-ACB. The major segment is the full circle minus the minor sector, plus the triangle (the triangle is subtracted from the sector when computing the minor segment, so it must be added back): \[ A_{\text{major segment}} = A_{\text{circle}} - A_{\text{minor sector}} + A_{\triangle OAB} \] \[ = 1386 - 231 + \frac{441\sqrt{3}}{4} \] \[ = 1155 + \frac{441\sqrt{3}}{4} \] \nApproximating: \[ A_{\text{major segment}} \approx 1155 + 190.95 \approx 1345.95 \text{ cm}^2 \]

Answer: \( A(\text{O-ACB}) = 1155 + \dfrac{441\sqrt{3}}{4} \approx 1345.95 \text{ cm}^2 \)

🎯 Try a Similar Question

Try a Similar Question

Question: In a circle with centre O, the radius is 14 cm. Arc PQR is a minor arc and the measure of arc PQR is 90°. Find the area of the major sector O-PSR (the sector on the opposite side of arc PQR), where S is any point on the major arc.

Solution

  1. Step 1: Identify the given information: Radius of the circle: \( r = 14 \) cm. Measure of minor arc PQR: \( \theta_{\text{minor}} = 90^{\circ} \). The major sector O-PSR corresponds to the remaining arc, so its central angle is \( \theta_{\text{major}} = 360^{\circ} - 90^{\circ} = 270^{\circ} \).
  2. Step 2: Write the formula for the major sector area: Area of major sector = \( \frac{\theta_{\text{major}}}{360} \times \pi r^2 \)
  3. Step 3: Substitute the values: Using \( \pi = \frac{22}{7} \), \( r = 14 \) cm, and \( \theta_{\text{major}} = 270^{\circ} \): \[ A = \frac{270}{360} \times \frac{22}{7} \times 14^2 \]
  4. Step 4: Simplify step by step: First simplify the fraction: \( \frac{270}{360} = \frac{3}{4} \). Then compute \( 14^2 = 196 \). So: \[ A = \frac{3}{4} \times \frac{22}{7} \times 196 \] Now, \( \frac{196}{7} = 28 \), giving: \[ A = \frac{3}{4} \times 22 \times 28 \] Then \( 22 \times 28 = 616 \), so: \[ A = \frac{3}{4} \times 616 = \frac{1848}{4} = 462 \]
  5. Step 5: State the final answer: The area of the major sector O-PSR is \( 462 \) cm\(^2\).

Answer: \[ A(\text{O-PSR}) = 462 \text{ cm}^2 \]

Everything you get with Solver7

More questions in Mensuration

Chapter 13 Examples Q1 Practice Set 13.1 Q1 Practice Set 13.2 Q1 Practice Set 13.3 Q1 Practice Set 13.4 Q1 Problem Set 13 Q1 (i) 03/2018 2018 / Question 2 Q1 03/2018 2018 / Question 3 Q1 (i) 03/2019 2019 / Question 4 Q1 Chapter 13 Examples Q2 Practice Set 13.1 Q2 Practice Set 13.2 Q2 (i) Practice Set 13.3 Q2 Practice Set 13.4 Q2 Problem Set 13 Q1 (ii) 03/2018 2018 / Question 3 Q1 (ii) 03/2019 2019 / Question 6 Q2 04/2019 2019 / Question 1 QA (ii) N397 2024 / Question 3 QA (ii) N632 2024 / Question 4 Q2 N697 2025 / Question 5 Q2 N932 2026 / Question 4 Q2 Chapter 13 Examples Q3 Practice Set 13.1 Q3 Practice Set 13.2 Q2 (ii) Practice Set 13.3 Q3 Practice Set 13.4 Q3 Problem Set 13 Q1 (iii) 03/2018 2018 / Question 1 Q3 03/2018 2018 / Question 3 Q1 (iii) 03/2018 2018 / Question 5 Q3 03/2019 2019 / Question 3 QA (iii) N397 2024 / Question 2 QA (iii) N397 2026 / Question 4 Q3 N632 2024 / Question 2 QA (iii) N926 2023 / Question 2 QA (iii) N926 2023 / Question 4 Q3 N932 2026 / Question 2 QA (iii) Chapter 13 Examples Q4 Practice Set 13.1 Q4 Practice Set 13.2 Q2 (iii) Practice Set 13.3 Q4 Practice Set 13.4 Q4 Problem Set 13 Q1 (iv) N397 2024 / Question 1 QA (iv) N632 2024 / Question 2 QB (i) N697 2025 / Question 1 QA (iv) N832 2025 / Question 1 QA (iv) N832 2025 / Question 4 Q3 (i) N926 2023 / Question 1 QA (iv) N932 2026 / Question 1 QA (iv) Chapter 13 Examples Q5 Practice Set 13.1 Q5 Practice Set 13.2 Q3 Practice Set 13.3 Q5 Practice Set 13.4 Q5 Problem Set 13 Q1 (v) 03/2018 2018 / Question 2 Q5 N697 2025 / Question 2 QB (ii) N832 2025 / Question 4 Q3 (ii)