SOLVER7 Study. Nothing Else.
Exercise 1.2 Q7(ii)

In each of the following cases, state whether the function is one-one, onto or bijective. Justify your answer. \( f : R → R\) defined by \(f(x) = 1 +x^2\) .

CBSE Class 12 Maths · Relations and Functions

Solution

👶 Simple Explanation

Simple Explanation

Imagine a machine that takes a number, squares it, and adds 1. Feed in 3 and you get 10. Feed in -3 and you also get 10. Two different inputs, same output — that means the machine is not one-one. Also, the machine can never output something smaller than 1, so numbers like 0 or -5 can never come out. Since not every possible output is reachable, it is not onto either. A function must be both to be called bijective.

Answer: The function \( f(x) = 1 + x^2 \) is neither one-one nor onto, and hence it is not bijective.

📖 Checking one-one and onto for f(x) = 1 + x^2

Detailed Explanation

A function \( f : A \to B \) is called one-one (injective) if different inputs give different outputs, that is, \( f(x_1) = f(x_2) \Rightarrow x_1 = x_2 \). It is called onto (surjective) if every element of the codomain \( B \) is the image of at least some element of \( A \), i.e. the range equals the codomain. A function that is both one-one and onto is called bijective. Here the domain and codomain are both \( \mathbb{R} \), and \( f(x) = 1 + x^2 \). Since squaring makes both a positive and a negative number give the same value, we should suspect the function fails injectivity, and since \( x^2 \ge 0 \) always, the outputs cannot cover all real numbers.

Formula Used

One-one: \( f(x_1) = f(x_2) \Rightarrow x_1 = x_2 \). Onto: range \( = \) codomain. Given \( f(x) = 1 + x^2 \).

Solution

  1. Step 1: Test whether f is one-one. Take two different inputs that could give the same output. Compute \( f(1) = 1 + 1^2 = 2 \) and \( f(-1) = 1 + (-1)^2 = 2 \).
  2. Step 2: Here \( 1 \ne -1 \) but \( f(1) = f(-1) = 2 \). So two different inputs give the same output. This violates the one-one condition. Therefore f is NOT one-one.
  3. Step 3: Test whether f is onto. Since \( x^2 \ge 0 \) for every real \( x \), we have \( 1 + x^2 \ge 1 \). So every output value is at least 1. This means the range of f is \( [1, \infty) \).
  4. Step 4: The codomain is all of \( \mathbb{R} \), but the range is only \( [1, \infty) \). For example, take \( y = 0 \) in the codomain. There is no real \( x \) with \( 1 + x^2 = 0 \), because that needs \( x^2 = -1 \), which is impossible for real \( x \). So some codomain values are never reached. Therefore f is NOT onto.
  5. Step 5: Since f is neither one-one nor onto, it cannot be bijective.

Final Answer

The function \( f(x) = 1 + x^2 \) is neither one-one nor onto, and hence it is not bijective.

Common Mistake

A common mistake is to check only one condition or to forget negative inputs. Students often say f is one-one after testing only positive values, missing that \( f(-1) = f(1) \). Always check both signs for one-one, and compare the actual range with the full codomain for onto.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the domain, codomain, and rule. Both the domain and codomain are \( \mathbb{R} \), and the rule is \( f(x) = 1 + x^2 \). — Reason: Knowing the domain and codomain lets us correctly judge whether the function is one-one and onto with respect to the full set of real numbers.
  2. Step 2: Pick two inputs that are different but whose squares are equal: choose \( x_1 = 1 \) and \( x_2 = -1 \). Compute each output: \[ f(1) = 1 + (1)^2 = 1 + 1 = 2 \] and \[ f(-1) = 1 + (-1)^2 = 1 + 1 = 2. \] — Reason: To disprove the one-one condition, it is enough to exhibit a single pair of distinct inputs that map to the same output.
  3. Step 3: Observe that \( 1 \ne -1 \) yet \( f(1) = f(-1) = 2 \). Because two distinct inputs produce the same output, the one-one condition is violated. Therefore \( f \) is NOT one-one. — Reason: The one-one property requires every output to come from exactly one input; a counterexample directly breaks this requirement.
  4. Step 4: Now check the onto condition. For any real number \( x \), we know \( x^2 \ge 0 \), so \[ f(x) = 1 + x^2 \ge 1 + 0 = 1. \] This means every value produced by \( f \) is at least \( 1 \), so the range of \( f \) is \( [1, \infty) \). — Reason: Finding a lower bound on \( f(x) \) tells us which real numbers can actually be outputs.
  5. Step 5: Compare the range with the codomain. The codomain is \( \mathbb{R} \), but the range is only \( [1, \infty) \). For example, take \( y = 0 \), which belongs to the codomain \( \mathbb{R} \). Setting \( 1 + x^2 = 0 \) gives \( x^2 = -1 \), which has no real solution. So \( y = 0 \) has no pre-image in \( \mathbb{R} \). — Reason: For a function to be onto, every element of the codomain must have at least one pre-image; a single element with no pre-image disproves surjectivity.
  6. Step 6: Conclude: since Range \( = [1, \infty) \ne \mathbb{R} \) = Codomain, the function \( f \) is NOT onto. Combined with Step 3, \( f \) fails both conditions, so it is not bijective. — Reason: Bijectivity requires both one-one and onto to hold simultaneously; here neither holds.

Final Answer

The function \( f(x) = 1 + x^2 \) is neither one-one nor onto, and hence it is not bijective.

Common Mistake

One common mistake: students check only whether \( f(x_1) = f(x_2) \) algebraically simplifies to \( x_1 = x_2 \) without testing a specific counterexample, and may incorrectly cancel \( x_1^2 = x_2^2 \) to get \( x_1 = x_2 \) while forgetting that \( x_1 = -x_2 \) is also a valid solution, leading them to wrongly conclude the function is one-one.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Check one-one: \( f(1) = 1 + 1^2 = 2 \) and \( f(-1) = 1 + (-1)^2 = 2 \), but \( 1 \ne -1 \). So \( f \) is NOT one-one.
  2. Step 2: Check onto: Since \( x^2 \ge 0 \) for all \( x \in \mathbb{R} \), we get \( f(x) = 1 + x^2 \ge 1 \), so range \( = [1, \infty) \ne \mathbb{R} \). For example, \( y = 0 \) has no pre-image. So \( f \) is NOT onto.
  3. Step 3: Conclusion: \( f \) is neither one-one nor onto, hence NOT bijective.

Answer: The function \( f(x) = 1 + x^2 \) is neither one-one nor onto, and hence it is not bijective.

➕ More Examples

More Examples

Example 1

Question: Let \( f : \mathbb{R} \to \mathbb{R} \) be defined by \( f(x) = 3 - 2x^2 \). Determine whether \( f \) is one-one, onto, or bijective. Justify your answer.

Solution: Step 1: Check whether f is one-one. Suppose \( f(a) = f(b) \) for some \( a, b \in \mathbb{R} \). Then: \[ 3 - 2a^2 = 3 - 2b^2 \] Simplifying: \[ -2a^2 = -2b^2 \] \[ a^2 = b^2 \] \[ a = \pm b \] So \( a = b \) or \( a = -b \). Since \( a \ne b \) is possible (e.g., \( a = 1, b = -1 \) gives \( f(1) = 1 = f(-1) \)), f is NOT one-one. Step 2: Check whether f is onto. We need to check if every \( y \in \mathbb{R} \) has a pre-image. Setting \( f(x) = y \): \[ 3 - 2x^2 = y \] \[ x^2 = \frac{3 - y}{2} \] For \( x \) to be real, we need \( \frac{3 - y}{2} \ge 0 \), i.e., \( y \le 3 \). So for any \( y > 3 \) (for example \( y = 10 \)), there is no real \( x \) with \( f(x) = 10 \). Hence f is NOT onto. Step 3: Conclusion. Since f is neither one-one nor onto, f is NOT bijective.

Answer: f is neither one-one nor onto, hence not bijective.

Example 2

Question: Let \( f : \mathbb{R} \to \mathbb{R} \) be defined by \( f(x) = x^3 - 5 \). Determine whether \( f \) is one-one, onto, or bijective. Justify your answer.

Solution: Step 1: Check whether f is one-one. Suppose \( f(a) = f(b) \) for some \( a, b \in \mathbb{R} \). Then: \[ a^3 - 5 = b^3 - 5 \] Simplifying: \[ a^3 = b^3 \] Since the cube function is strictly increasing over \( \mathbb{R} \), \( a^3 = b^3 \) implies \( a = b \). Therefore f is one-one. Step 2: Check whether f is onto. Let \( y \in \mathbb{R} \) be arbitrary. We need \( x \in \mathbb{R} \) such that \( f(x) = y \): \[ x^3 - 5 = y \] \[ x^3 = y + 5 \] \[ x = \left(y + 5\right)^{1/3} \] For every \( y \in \mathbb{R} \), \( y + 5 \in \mathbb{R} \) and every real number has a unique real cube root. So \( x = \left(y + 5\right)^{1/3} \in \mathbb{R} \) and \( f(x) = y \). Hence f is onto. Step 3: Conclusion. Since f is both one-one and onto, f is bijective.

Answer: f is both one-one and onto, hence bijective.

🎯 Try a Similar Question

Try a Similar Question

Question: Let \( f : \mathbb{R} \to \mathbb{R} \) be defined by \( f(x) = 3x^2 - 2 \). State whether \( f \) is one-one, onto, or bijective. Justify your answer.

Solution

  1. Step 1: Check if f is one-one (injective): Suppose \( f(x_1) = f(x_2) \) for some \( x_1, x_2 \in \mathbb{R} \). Then: \[ 3x_1^2 - 2 = 3x_2^2 - 2 \] This gives \( 3x_1^2 = 3x_2^2 \), so \( x_1^2 = x_2^2 \), which means \( x_1 = x_2 \) OR \( x_1 = -x_2 \).
  2. Step 2: Provide a counterexample for one-one: Take \( x_1 = 2 \) and \( x_2 = -2 \). Then: \[ f(2) = 3(2)^2 - 2 = 12 - 2 = 10 \] and \[ f(-2) = 3(-2)^2 - 2 = 12 - 2 = 10 \] So \( f(2) = f(-2) \) but \( 2 \ne -2 \). Hence \( f \) is NOT one-one.
  3. Step 3: Find the range of f: Since \( x^2 \ge 0 \) for all \( x \in \mathbb{R} \), we have \( 3x^2 \ge 0 \), so \( f(x) = 3x^2 - 2 \ge -2 \). Therefore, the range of \( f \) is \( [-2, \infty) \).
  4. Step 4: Check if f is onto (surjective): The codomain of \( f \) is \( \mathbb{R} \), but the range is only \( [-2, \infty) \). For example, \( -5 \in \mathbb{R} \) is in the codomain, but there is no \( x \in \mathbb{R} \) such that \( f(x) = -5 \), because \( 3x^2 - 2 = -5 \) gives \( x^2 = -1 \), which has no real solution. Hence \( f \) is NOT onto.
  5. Step 5: Conclusion: Since \( f \) is neither one-one nor onto, it is also not bijective.

Answer: The function \( f(x) = 3x^2 - 2 \) is neither one-one nor onto, and hence it is not bijective. Its range is \( [-2, \infty) \), which is a proper subset of the codomain \( \mathbb{R} \).

Everything you get with Solver7

More questions in Relations and Functions