Show that the function \(f\) given by \(f(x)=\begin{cases}x^3+3,&\text{if\)\ne\(0}\\ 1& \text{if x=0}\end{cases}\)
is not continuous at \(x = 0.\)
CBSE Class 12 Maths · Continuity and Differentiability
CBSE Class 12 Maths · Continuity and Differentiability
Imagine a light switch that is supposed to glow based on where you point it. Near the switch, the glow builds up to a brightness of 3. But the switch itself is labelled 1. That mismatch means something is broken. A continuous function is like a smooth, unbroken path — the value you reach by walking toward a point must match the value sitting at that point. Here, walking toward \( x = 0 \) gives 3, but the function says 1 at that exact spot. Because those two disagree, the function is not continuous there.
Answer: Since \( \lim_{x \to 0} f(x) = 3 \) while \( f(0) = 1 \), and \( 3 \ne 1 \), the function \( f \) is not continuous at \( x = 0 \).
A function \( f \) is said to be continuous at a point \( x = a \) if three conditions all hold: \( f(a) \) exists, the limit \( \lim_{x \to a} f(x) \) exists, and these two are equal, that is \( \lim_{x \to a} f(x) = f(a) \). If even one of these fails, the function is not continuous (it is discontinuous) at that point. For a piecewise function like this one, the rule at the point (here \( x = 0 \)) may give a different value from what the nearby rule (here \( x^3 + 3 \)) approaches. That mismatch is exactly what causes discontinuity here.
\( f \) is continuous at \( x = a \) if \( \lim_{x \to a} f(x) = f(a) \).
Since \( \lim_{x \to 0} f(x) = 3 \) while \( f(0) = 1 \), and \( 3 \ne 1 \), the function \( f \) is not continuous at \( x = 0 \).
A common mistake is to substitute \( x = 0 \) into \( x^3 + 3 \) and conclude the value is \( 3 \), forgetting that the function is separately defined as \( f(0) = 1 \). The limit uses the rule for \( x \ne 0 \), but the function value at \( 0 \) must come from the special case; comparing these two correctly is the key to detecting the discontinuity.
Since \( \lim_{x \to 0} f(x) = 3 \) while \( f(0) = 1 \), and \( 3 \ne 1 \), the function \( f \) is not continuous at \( x = 0 \).
One common mistake: students incorrectly use the isolated definition \( f(0) = 1 \) when computing the limit, writing \( \lim_{x \to 0} f(x) = 1 \) and wrongly concluding the function is continuous. Remember, a limit describes behaviour near a point, not at it, so always use the piece of the function that applies for \( x \ne 0 \).
Answer: Since \( \lim_{x \to 0} f(x) = 3 \) while \( f(0) = 1 \), and \( 3 \ne 1 \), the function \( f \) is not continuous at \( x = 0 \).
Question: Show that the function \( f \) defined by \[f(x) = \begin{cases} x^2 + 5 & \text{if } x \ne 0 \\ 2 & \text{if } x = 0 \end{cases}\] is not continuous at \( x = 0 \).
Solution: To check continuity at \( x = 0 \), we need to verify whether \( \lim_{x \to 0} f(x) = f(0) \). Step 1: Find the value of the function at \( x = 0 \). From the definition, \( f(0) = 2 \). Step 2: Find the left-hand limit as \( x \to 0^- \). For \( x \ne 0 \), we use \( f(x) = x^2 + 5 \). So: \[\lim_{x \to 0^-} f(x) = \lim_{x \to 0^-} (x^2 + 5) = 0 + 5 = 5\] Step 3: Find the right-hand limit as \( x \to 0^+ \). \[\lim_{x \to 0^+} f(x) = \lim_{x \to 0^+} (x^2 + 5) = 0 + 5 = 5\] Step 4: Compare the limit with \( f(0) \). Since \( \lim_{x \to 0^-} f(x) = \lim_{x \to 0^+} f(x) = 5 \), the limit exists and equals \( 5 \). However, \( f(0) = 2 \ne 5 \). Since \( \lim_{x \to 0} f(x) \ne f(0) \), the function \( f \) is NOT continuous at \( x = 0 \).
Answer: The function is not continuous at \( x = 0 \) because \( \lim_{x \to 0} f(x) = 5 \ne 2 = f(0) \).
Question: Examine the continuity of the function \( g \) at \( x = 1 \), where \[g(x) = \begin{cases} 2x^2 - 1 & \text{if } x \ne 1 \\ 4 & \text{if } x = 1 \end{cases}\]
Solution: To check continuity at \( x = 1 \), we verify whether \( \lim_{x \to 1} g(x) = g(1) \). Step 1: Find \( g(1) \) from the definition. \( g(1) = 4 \). Step 2: Find the left-hand limit as \( x \to 1^- \). For \( x \ne 1 \), \( g(x) = 2x^2 - 1 \). So: \[\lim_{x \to 1^-} g(x) = \lim_{x \to 1^-} (2x^2 - 1) = 2(1)^2 - 1 = 2 - 1 = 1\] Step 3: Find the right-hand limit as \( x \to 1^+ \). \[\lim_{x \to 1^+} g(x) = \lim_{x \to 1^+} (2x^2 - 1) = 2(1)^2 - 1 = 1\] Step 4: Compare the limit with \( g(1) \). Both one-sided limits are equal: \( \lim_{x \to 1} g(x) = 1 \). But \( g(1) = 4 \ne 1 \). Since \( \lim_{x \to 1} g(x) \ne g(1) \), the function \( g \) is NOT continuous at \( x = 1 \).
Answer: The function is not continuous at \( x = 1 \) because \( \lim_{x \to 1} g(x) = 1 \ne 4 = g(1) \).
Question: Examine whether the function f defined by \[ f(x) = \begin{cases} x^2 + 5 & \text{if } x \ne 0 \\ 2 & \text{if } x = 0 \end{cases} \] is continuous at \( x = 0 \).
Answer: Since \( \lim_{x \to 0} f(x) = 5 \) while \( f(0) = 2 \), and \( 5 \ne 2 \), the function f is not continuous at \( x = 0 \).