Discuss the continuity of the function \(f\) given by \( f(x) = | x |\) at \(x = 0.\)
CBSE Class 12 Maths · Continuity and Differentiability
CBSE Class 12 Maths · Continuity and Differentiability
Imagine walking along a path and reaching a bridge. Continuity just means there is no gap or jump at that bridge. For the function \( f(x) = |x| \), the point we care about is \( x = 0 \). Coming from the left side, the path smoothly reaches zero. Coming from the right side, the path also smoothly reaches zero. The bridge itself sits exactly at zero too, so everything matches perfectly and there is no break.
Answer: Since \( \lim_{x \to 0^{-}} f(x) = \lim_{x \to 0^{+}} f(x) = f(0) = 0 \), the function \( f(x) = |x| \) is continuous at \( x = 0 \).
A function \( f \) is said to be continuous at a point \( x = a \) if three conditions hold together: the function is defined at \( a \), the limit \( \lim_{x \to a} f(x) \) exists, and this limit equals the function value \( f(a) \). To check that the limit exists at \( a \), we compute the left-hand limit (LHL) as \( x \to a^{-} \) and the right-hand limit (RHL) as \( x \to a^{+} \); the limit exists only when LHL = RHL. Here the modulus function can be written as a piecewise function, so we evaluate the two one-sided limits separately and compare them with the value of the function at \( x = 0 \).
\( f \) is continuous at \( x = a \) if \( \lim_{x \to a^{-}} f(x) = \lim_{x \to a^{+}} f(x) = f(a) \). Also \( |x| = \begin{cases} x & x \ge 0 \\ -x & x < 0 \end{cases} \)
Since \( \lim_{x \to 0^{-}} f(x) = \lim_{x \to 0^{+}} f(x) = f(0) = 0 \), the function \( f(x) = |x| \) is continuous at \( x = 0 \).
A common mistake is to think that because \( |x| \) has a sharp corner at \( x = 0 \), it must be discontinuous there. The corner means the function is not differentiable at \( x = 0 \), but it is still continuous, since both one-sided limits equal \( f(0) \). Continuity and differentiability are different things.
Since \( \lim_{x \to 0^{-}} f(x) = \lim_{x \to 0^{+}} f(x) = f(0) = 0 \), the function \( f(x) = |x| \) is continuous at \( x = 0 \).
One common mistake: Students sometimes apply the wrong branch of the piecewise definition when computing the one-sided limits — for example, using \( f(x) = x \) even when \( x \to 0^{-} \) (where \( x < 0 \)). Always check which branch of \( |x| \) corresponds to the direction from which you are approaching.
Answer: Since \( \lim_{x \to 0^{-}} f(x) = \lim_{x \to 0^{+}} f(x) = f(0) = 0 \), the function \( f(x) = |x| \) is continuous at \( x = 0 \).
Question: Discuss the continuity of the function \( f \) defined by \[ f(x) = \begin{cases} 3x + 2 & x > 0 \\ 2 & x = 0 \\ 3x - 2 & x < 0 \end{cases} \] at \( x = 0 \).
Solution: We check the three conditions for continuity at \( x = 0 \). Step 1 — Value of the function at \( x = 0 \): \[ f(0) = 2 \] Step 2 — Left-Hand Limit (LHL): As \( x \to 0^- \), we use \( f(x) = 3x - 2 \). \[ \lim_{x \to 0^-} f(x) = \lim_{x \to 0^-} (3x - 2) = 3(0) - 2 = -2 \] Step 3 — Right-Hand Limit (RHL): As \( x \to 0^+ \), we use \( f(x) = 3x + 2 \). \[ \lim_{x \to 0^+} f(x) = \lim_{x \to 0^+} (3x + 2) = 3(0) + 2 = 2 \] Step 4 — Comparing LHL and RHL: \[ \lim_{x \to 0^-} f(x) = -2 \ne 2 = \lim_{x \to 0^+} f(x) \] Since LHL \( \ne \) RHL, the limit of \( f(x) \) as \( x \to 0 \) does not exist. Therefore, \( f \) is NOT continuous at \( x = 0 \).
Answer: f is discontinuous at x = 0 because the left-hand limit (−2) does not equal the right-hand limit (2).
Question: Examine the continuity of the function \( g \) at \( x = 1 \), where \[ g(x) = \begin{cases} x^2 - 1 & x < 1 \\ 0 & x = 1 \\ 2x - 2 & x > 1 \end{cases} \]
Solution: We verify the three conditions for continuity at \( x = 1 \). Step 1 — Value of the function at \( x = 1 \): \[ g(1) = 0 \] Step 2 — Left-Hand Limit (LHL): As \( x \to 1^- \), we use \( g(x) = x^2 - 1 \). \[ \lim_{x \to 1^-} g(x) = \lim_{x \to 1^-} (x^2 - 1) = (1)^2 - 1 = 0 \] Step 3 — Right-Hand Limit (RHL): As \( x \to 1^+ \), we use \( g(x) = 2x - 2 \). \[ \lim_{x \to 1^+} g(x) = \lim_{x \to 1^+} (2x - 2) = 2(1) - 2 = 0 \] Step 4 — Checking all three conditions: \[ \lim_{x \to 1^-} g(x) = 0, \quad \lim_{x \to 1^+} g(x) = 0, \quad g(1) = 0 \] Since LHL \( = \) RHL \( = g(1) = 0 \), all three conditions are satisfied. Therefore, \( g \) IS continuous at \( x = 1 \).
Answer: g is continuous at x = 1 because LHL = RHL = g(1) = 0.
Question: Discuss the continuity of the function \( f \) defined by \[ f(x) = \begin{cases} x + 3 & \text{if } x < 2 \\ 2x - 1 & \text{if } x \ge 2 \end{cases} \] at \( x = 2 \).
Answer: The function \( f \) is discontinuous at \( x = 2 \), because \( \lim_{x \to 2^{-}} f(x) = 5 \ne 3 = \lim_{x \to 2^{+}} f(x) \), so the limit does not exist at \( x = 2 \).