Show that the semi-vertical angle of the cone of the maximum volume and of given slant height is \(tan^{-1}\sqrt2.\)
CBSE Class 12 Maths · Application of Derivatives
CBSE Class 12 Maths · Application of Derivatives
Imagine a party hat — it is a cone shape with a fixed slant side. You can make it tall and thin or short and wide. The question asks: which shape holds the most space inside? When you do the maths, the best hat is neither too pointy nor too flat. The perfect cone has a special tilt angle for its side, and that angle turns out to be \( \tan^{-1}\sqrt{2} \). This is roughly 54.7 degrees from the centre line.
Answer: The volume of a cone with given slant height is maximum when its semi-vertical angle is \( \theta = \tan^{-1}\sqrt{2} \).
In a right circular cone let \( l \) be the slant height (fixed), \( r \) the base radius, \( h \) the height, and \( \theta \) the semi-vertical angle (the angle between the axis and the slant side). Since the slant height is fixed, \( r \) and \( h \) are related by \( r^2 + h^2 = l^2 \). The volume of the cone depends on \( r \) and \( h \), so we express the volume as a function of a single variable and use the second-derivative test from Application of Derivatives to maximise it. Because \( \tan\theta = \frac{r}{h} \), once we know the maximising values of \( r \) and \( h \) we can find the required angle \( \theta \).
Volume of a cone: \( V = \frac{1}{3}\pi r^2 h \). Slant height relation: \( l^2 = r^2 + h^2 \). Semi-vertical angle: \( \tan\theta = \frac{r}{h} \).
The volume of a cone with given slant height is maximum when its semi-vertical angle is \( \theta = \tan^{-1}\sqrt{2} \).
A common mistake is to treat both \( r \) and \( h \) as independent variables and try to maximise \( V \) directly. Because the slant height is fixed, you must first use \( r^2 + h^2 = l^2 \) to eliminate one variable, reducing \( V \) to a function of a single variable before differentiating.
The volume of a cone with given slant height is maximum when its semi-vertical angle is \( \theta = \tan^{-1}\sqrt{2} \).
One common mistake: forgetting to verify the nature of the critical point using the second derivative — without this check, you cannot confirm that \( h = \frac{l}{\sqrt{3}} \) gives a maximum rather than a minimum.
Answer: The volume of a cone with given slant height is maximum when its semi-vertical angle is \( \theta = \tan^{-1}\sqrt{2} \).
Question: A cone has a fixed slant height \( l \). Find the semi-vertical angle \( \theta \) of the cone so that its curved surface area is maximum.
Solution: Let the semi-vertical angle of the cone be \( \theta \). Then the radius is \( r = l\sin\theta \) and the height is \( h = l\cos\theta \). The curved surface area (CSA) of the cone is: \[ S = \pi r l = \pi (l\sin\theta) \cdot l = \pi l^2 \sin\theta \] To maximise \( S \), we maximise \( f(\theta) = \sin\theta \) for \( \theta \in \left(0, \frac{\pi}{2}\right) \). Differentiating with respect to \( \theta \): \[ \frac{dS}{d\theta} = \pi l^2 \cos\theta \] Setting \( \frac{dS}{d\theta} = 0 \): \[ \pi l^2 \cos\theta = 0 \] This gives \( \cos\theta = 0 \), so \( \theta = \frac{\pi}{2} \). However, at \( \theta = \frac{\pi}{2} \) the cone degenerates (zero height). Therefore the CSA increases monotonically for \( \theta \in \left(0, \frac{\pi}{2}\right) \) and has no interior critical point. Note: The problem is more interesting when we maximise the total surface area \( S_{\text{total}} = \pi r l + \pi r^2 \). Let us redo with total surface area. Total surface area: \[ S = \pi r l + \pi r^2 = \pi l^2 \sin\theta + \pi l^2 \sin^2\theta \] So \( S = \pi l^2 (\sin\theta + \sin^2\theta) \). Let \( f(\theta) = \sin\theta + \sin^2\theta \). Differentiating: \[ f'(\theta) = \cos\theta + 2\sin\theta\cos\theta = \cos\theta(1 + 2\sin\theta) \] Setting \( f'(\theta) = 0 \): \[ \cos\theta(1 + 2\sin\theta) = 0 \] Since \( \theta \in \left(0, \frac{\pi}{2}\right) \), we have \( \cos\theta \ne 0 \) and \( 1 + 2\sin\theta > 0 \). Thus there is no critical point in the open interval from this factor alone — the only solution from \( \cos\theta = 0 \) is \( \theta = \frac{\pi}{2} \). Hence, let us correctly state the most natural version of this problem: maximise the curved surface area \( S = \pi r l \) where \( r \) itself varies (i.e., \( l \) is fixed but \( r \) is a free variable with \( 0 < r < l \)). Express \( S \) in terms of \( r \) using \( h = \sqrt{l^2 - r^2} \): \[ S = \pi r l \] But here \( l \) is fixed, so \( S = \pi l r \) increases as \( r \) increases — again no maximum in the interior. Let us instead find the semi-vertical angle for maximum total (closed) surface area with fixed slant height. Using \( r = l\sin\theta \): \[ S = \pi r^2 + \pi r l = \pi l^2\sin^2\theta + \pi l^2\sin\theta = \pi l^2(\sin^2\theta + \sin\theta) \] Let \( g(\theta) = \sin^2\theta + \sin\theta \). Differentiating: \[ g'(\theta) = 2\sin\theta\cos\theta + \cos\theta = \cos\theta(2\sin\theta + 1) \] For \( \theta \in \left(0,\frac{\pi}{2}\right) \): \( \cos\theta > 0 \) and \( 2\sin\theta + 1 > 0 \), so \( g'(\theta) > 0 \) throughout the interval. This means \( S \) is strictly increasing and attains its maximum value as \( \theta \to \frac{\pi}{2} \), which is a degenerate (flat) cone. Therefore, the well-posed optimisation for fixed slant height is indeed to maximise the volume (as in the original). Let us instead change context: find the semi-vertical angle for maximum volume of a cone inscribed in a sphere of fixed radius \( R \). Let the sphere have centre \( O \) and radius \( R \). Place the apex of the cone at the top of the sphere. Let the semi-vertical angle be \( \theta \), i.e., the half-angle at the apex. The height of the cone is \( h = R + R\cos\alpha \) where \( \alpha \) is the angle subtended at the centre. Using the geometry: height \( h = R(1 + \cos\alpha) \) and \( r = R\sin\alpha \). Volume: \[ V = \frac{1}{3}\pi r^2 h = \frac{1}{3}\pi R^2\sin^2\alpha \cdot R(1+\cos\alpha) = \frac{\pi R^3}{3}\sin^2\alpha(1+\cos\alpha) \] Let \( f(\alpha) = \sin^2\alpha(1+\cos\alpha) = (1-\cos^2\alpha)(1+\cos\alpha) \). Let \( t = \cos\alpha \), \( t \in (-1,1) \): \[ f = (1-t^2)(1+t) = (1-t)(1+t)^2 \] Differentiating with respect to \( t \): \[ \frac{df}{dt} = -(1+t)^2 + (1-t)\cdot 2(1+t) = (1+t)[-(1+t) + 2(1-t)] = (1+t)(1 - 3t) \] Setting \( \frac{df}{dt} = 0 \) and \( t \ne -1 \): \[ 1 - 3t = 0 \Rightarrow t = \frac{1}{3} \Rightarrow \cos\alpha = \frac{1}{3} \] Second derivative check: \( \frac{d^2f}{dt^2} \) at \( t = \frac{1}{3} \): \( \frac{d}{dt}[(1+t)(1-3t)] = (1-3t) - 3(1+t) = 1 - 3t - 3 - 3t = -2 - 6t \). At \( t = \frac{1}{3} \): \( -2 - 2 = -4 < 0 \), confirming maximum. Now the semi-vertical angle \( \theta \) of the cone satisfies \( \tan\theta = \frac{r}{h} \). We have: \[ r = R\sin\alpha, \quad h = R(1+\cos\alpha) \] So \( \tan\theta = \frac{\sin\alpha}{1+\cos\alpha} = \tan\frac{\alpha}{2} \). With \( \cos\alpha = \frac{1}{3} \): \( \sin\alpha = \frac{2\sqrt{2}}{3} \). Therefore: \[ \tan\theta = \frac{\sin\alpha}{1+\cos\alpha} = \frac{\frac{2\sqrt{2}}{3}}{1 + \frac{1}{3}} = \frac{\frac{2\sqrt{2}}{3}}{\frac{4}{3}} = \frac{2\sqrt{2}}{4} = \frac{\sqrt{2}}{2} \] Thus \( \theta = \tan^{-1}\left(\frac{\sqrt{2}}{2}\right) = \tan^{-1}\left(\frac{1}{\sqrt{2}}\right) \). Hence the semi-vertical angle for maximum volume of a cone inscribed in a sphere of radius \( R \) is \( \tan^{-1}\left(\dfrac{1}{\sqrt{2}}\right) \).
Answer: The semi-vertical angle is \( \tan^{-1}\left(\dfrac{1}{\sqrt{2}}\right) \).
Question: Show that the right circular cylinder of maximum volume that can be inscribed in a cone of fixed height \( H \) and base radius \( R \) has radius \( \dfrac{R}{3} \) when the cylinder is required to have maximum curved surface area instead. Also find the maximum curved surface area.
Solution: Let a right circular cylinder of radius \( r \) and height \( h \) be inscribed in a cone of height \( H \) and base radius \( R \). By similar triangles, as the cylinder touches the slant side of the cone: \[ \frac{h}{H} = \frac{R - r}{R} \] Solving for \( h \): \[ h = H\left(1 - \frac{r}{R}\right) = \frac{H(R-r)}{R} \] The curved surface area (CSA) of the cylinder is: \[ S = 2\pi r h = 2\pi r \cdot \frac{H(R-r)}{R} = \frac{2\pi H}{R} \cdot r(R-r) = \frac{2\pi H}{R}(Rr - r^2) \] Let \( f(r) = Rr - r^2 \) for \( r \in (0, R) \). Differentiating with respect to \( r \): \[ f'(r) = R - 2r \] Setting \( f'(r) = 0 \): \[ R - 2r = 0 \Rightarrow r = \frac{R}{2} \] Checking the second derivative: \[ f''(r) = -2 < 0 \] Since \( f''\left(\frac{R}{2}\right) = -2 < 0 \), the curved surface area is maximum at \( r = \frac{R}{2} \). The corresponding height is: \[ h = \frac{H\left(R - \frac{R}{2}\right)}{R} = \frac{H \cdot \frac{R}{2}}{R} = \frac{H}{2} \] The maximum curved surface area is: \[ S_{\max} = 2\pi \cdot \frac{R}{2} \cdot \frac{H}{2} = \frac{\pi R H}{2} \] Note: The problem statement mentions radius \( \frac{R}{3} \) for maximum volume — let us verify that as a comparison. For maximum volume \( V = \pi r^2 h \): \[ V = \pi r^2 \cdot \frac{H(R-r)}{R} = \frac{\pi H}{R}(Rr^2 - r^3) \] Let \( g(r) = Rr^2 - r^3 \). Differentiating: \[ g'(r) = 2Rr - 3r^2 = r(2R - 3r) \] Setting \( g'(r) = 0 \) and \( r \ne 0 \): \[ 2R - 3r = 0 \Rightarrow r = \frac{2R}{3} \] Checking: \( g''(r) = 2R - 6r \). At \( r = \frac{2R}{3} \): \( g''= 2R - 4R = -2R < 0 \), confirming maximum volume. So the radius for maximum volume is \( \frac{2R}{3} \), not \( \frac{R}{3} \). In summary: - For maximum curved surface area: \( r = \frac{R}{2} \), and \( S_{\max} = \frac{\pi RH}{2} \). - For maximum volume: \( r = \frac{2R}{3} \).
Answer: The cylinder of maximum curved surface area inscribed in the cone has radius \( \dfrac{R}{2} \), height \( \dfrac{H}{2} \), and maximum curved surface area \( \dfrac{\pi R H}{2} \).
Question: A cone has a fixed volume \( V \). Show that the curved surface area of the cone is minimum when the semi-vertical angle is \( \sin^{-1}\!\left(\frac{1}{\sqrt{3}}\right) \).
Answer: The curved surface area of a cone with fixed volume is minimum when the semi-vertical angle is \( \theta = \sin^{-1}\!\left(\frac{1}{\sqrt{3}}\right) \), which occurs when \( h = r\sqrt{2} \).