SOLVER7 Study. Nothing Else.
2023 Board Paper Q37(i)

In order to set up a rain water harvesting system, a tank to collect rain water is to be dug. The tank should have a square base and a capacity of \(250 m^3.\) The cost of land is ₹\( 5,000\) per square metre and cost of digging increases with depth and for the whole tank, it is ₹\( 40,000\ h^2,\) where h is the depth of the tank in metres. \(x\) is the side of the square base of the tank in metres. Based on the above information, answer the following questions : Find the total cost \(C\) of digging the tank in terms of \(x.\)

CBSE Class 12 Maths · Application of Derivatives

Solution

👶 Simple Explanation

Simple Explanation

Imagine digging a square swimming pool in your garden. The bigger the square opening, the more expensive the land. The deeper you dig, the more expensive the digging. But here is the tricky part: the pool must hold exactly 250 cubic metres of water. So if you make the square base wider, you do not need to dig as deep. We use this balance to write the total cost using just one number — the width of the square base. That single formula tells you everything about the cost.

Answer: \[ C(x) = 5000\,x^2 + \frac{2500000000}{x^4} \] rupees, where \( x \) is the side of the square base in metres.

📖 Total Cost of Digging the Rain Water Harvesting Tank

Detailed Explanation

From the image, the tank has a square base of side \( x \) and depth \( h \). The volume (capacity) is fixed, so \( x \) and \( h \) are related. We use this relation to eliminate \( h \). The total cost has two parts: the cost of the land, which depends on the area of the square base \( x^2 \), and the cost of digging, which depends on the depth \( h \). By writing \( h \) in terms of \( x \) using the volume, we express the whole cost as a single function of \( x \). This is a typical setup for an Application of Derivatives problem, where later we would minimise the cost.

Formula Used

Volume of tank: \( V = x^2 h \). Cost of land: \( 5000 \times (\text{base area}) = 5000\,x^2 \). Cost of digging: \( 40000\,h^2 \). Total cost: \( C = 5000\,x^2 + 40000\,h^2 \).

Solution

  1. Step 1: Write the volume relation. The base is a square of side \( x \) and depth is \( h \), so the capacity is \[ V = x^2 h = 250. \]
  2. Step 2: Express \( h \) in terms of \( x \). From \( x^2 h = 250 \) we get \[ h = \frac{250}{x^2}. \]
  3. Step 3: Write each cost component. The cost of land depends on the base area \( x^2 \): \[ \text{Land cost} = 5000\,x^2. \] The cost of digging is given as \[ \text{Digging cost} = 40000\,h^2. \]
  4. Step 4: Add the two components to form the total cost. \[ C = 5000\,x^2 + 40000\,h^2. \]
  5. Step 5: Substitute \( h = \dfrac{250}{x^2} \) so that \( h^2 = \dfrac{62500}{x^4} \). Then \[ C = 5000\,x^2 + 40000 \cdot \frac{62500}{x^4}. \]
  6. Step 6: Simplify the second term. Since \( 40000 \times 62500 = 2500000000 \), \[ C = 5000\,x^2 + \frac{2500000000}{x^4}. \] This is the total cost purely in terms of \( x \).

Final Answer

\[ C(x) = 5000\,x^2 + \frac{2500000000}{x^4} \] rupees, where \( x \) is the side of the square base in metres.

Common Mistake

A common mistake is taking the land cost over the full surface area of the tank (base plus walls) instead of only the square base area \( x^2 \), or forgetting to square \( h \) when substituting, which gives \( 40000\,h^2 = 40000\left(\dfrac{250}{x^2}\right)^2 \), not \( 40000\cdot\dfrac{250}{x^2} \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify variables and set up the volume constraint: Let the side of the square base be \( x \) metres and the depth be \( h \) metres. The tank must hold 250 cubic metres, so the volume equation is \[ x^2 h = 250. \] Reason: Fixing the volume ties \( x \) and \( h \) together, which will let us eliminate one of them later.
  2. Step 2: Express depth \( h \) in terms of \( x \): Rearranging \( x^2 h = 250 \) by dividing both sides by \( x^2 \) gives \[ h = \frac{250}{x^2}. \] Reason: We want a single-variable cost function, so we express the unknown depth \( h \) through the base side \( x \).
  3. Step 3: Write the two cost components separately: The cost of the land equals \( 5000 \) rupees per square metre times the base area \( x^2 \), giving a land cost of \( 5000\\,x^2 \) rupees. The cost of digging equals \( 40000\\,h^2 \) rupees. Reason: Identifying each cost separately makes it easy to add them without mixing up their formulas.
  4. Step 4: Form the total cost function in terms of \( x \) and \( h \): Adding both components: \[ C = 5000\\,x^2 + 40000\\,h^2. \] Reason: The total cost is simply the sum of the land cost and the digging cost.
  5. Step 5: Substitute \( h \) and compute \( h^2 \): Substituting \( h = \dfrac{250}{x^2} \) gives \( h^2 = \dfrac{250^2}{x^4} = \dfrac{62500}{x^4} \). Replacing \( h^2 \) in the cost formula: \[ C = 5000\\,x^2 + 40000 \cdot \frac{62500}{x^4}. \] Reason: This substitution converts the two-variable expression into a function of \( x \) alone.
  6. Step 6: Simplify the numerical coefficient: Multiply the constants in the second term: \( 40000 \times 62500 = 2{,}500{,}000{,}000 \). Therefore \[ C(x) = 5000\\,x^2 + \frac{2500000000}{x^4}. \] Reason: Combining the numbers into a single coefficient gives the cleanest form of the cost function, ready for differentiation.

Final Answer

\[ C(x) = 5000\,x^2 + \frac{2500000000}{x^4} \] rupees, where \( x \) is the side of the square base in metres.

Common Mistake

One common mistake: forgetting to square \( h \) when substituting — students sometimes write \( 40000 \times \dfrac{250}{x^2} \) instead of \( 40000 \times \dfrac{250^2}{x^4} \), which gives a completely wrong cost function.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Volume constraint: \[ x^2 h = 250 \implies h = \frac{250}{x^2} \]
  2. Step 2: Total cost: \[ C = 5000\,x^2 + 40000\,h^2 \]
  3. Step 3: Substitute \( h^2 = \dfrac{62500}{x^4} \): \[ C = 5000\,x^2 + 40000 \times \frac{62500}{x^4} = 5000\,x^2 + \frac{2500000000}{x^4} \]

Answer: \[ C(x) = 5000\,x^2 + \frac{2500000000}{x^4} \] rupees, where \( x \) is the side of the square base in metres.

➕ More Examples

More Examples

Example 1

Question: A municipal corporation plans to build an underground water storage tank with a square base and a fixed capacity of 400 m³. The cost of acquiring land is ₹8,000 per square metre (of the base area). The cost of digging the tank (for the whole tank) is ₹50,000 h², where h (in metres) is the depth of the tank. If x metres is the side of the square base, express the total cost C of digging the tank in terms of x.

Solution: Let the side of the square base be \( x \) metres and the depth be \( h \) metres. The volume of the tank is fixed at 400 m³, so: \[ x^2 h = 400 \] Solving for h: \[ h = \frac{400}{x^2} \] The cost of land (based on the base area \( x^2 \)) is: \[ C_{\text{land}} = 8000 \times x^2 \] The cost of digging is: \[ C_{\text{dig}} = 50000 \, h^2 \] Substituting \( h = \dfrac{400}{x^2} \): \[ C_{\text{dig}} = 50000 \times \left(\frac{400}{x^2}\right)^2 = 50000 \times \frac{160000}{x^4} = \frac{8000000000}{x^4} \] Therefore, the total cost is: \[ C(x) = C_{\text{land}} + C_{\text{dig}} \] \[ C(x) = 8000x^2 + \frac{8 \times 10^9}{x^4} \]

Answer: \( C(x) = 8000x^2 + \dfrac{8 \times 10^9}{x^4} \)

Example 2

Question: A farmer wants to dig a rectangular tank with a square base to store irrigation water. The tank must hold exactly 360 m³ of water. The cost of land used for the tank is ₹6,000 per square metre of the base. The total cost of digging is ₹30,000 h², where h (in metres) is the depth of the tank. If x metres denotes the length of each side of the square base, find the total cost C in terms of x.

Solution: Let the side of the square base be \( x \) metres and the depth be \( h \) metres. Using the volume constraint: \[ x^2 h = 360 \] Solving for h: \[ h = \frac{360}{x^2} \] The cost of land is: \[ C_{\text{land}} = 6000 \times x^2 \] The cost of digging the entire tank is: \[ C_{\text{dig}} = 30000 \, h^2 \] Substituting \( h = \dfrac{360}{x^2} \): \[ C_{\text{dig}} = 30000 \times \left(\frac{360}{x^2}\right)^2 = 30000 \times \frac{129600}{x^4} = \frac{3888000000}{x^4} \] Therefore, the total cost is: \[ C(x) = C_{\text{land}} + C_{\text{dig}} \] \[ C(x) = 6000x^2 + \frac{3.888 \times 10^9}{x^4} \]

Answer: \( C(x) = 6000x^2 + \dfrac{3.888 \times 10^9}{x^4} \)

🎯 Try a Similar Question

Try a Similar Question

Question: To set up a water storage facility, a rectangular tank with a square base is to be constructed. The tank must have a capacity of \( 400 \text{ m}^3 \). The cost of land is ₹ 8,000 per square metre (based on the area of the square base), and the cost of construction increases with depth; for the whole tank it is ₹ \( 50,000 \, h^2 \), where \( h \) is the depth of the tank in metres. Let \( x \) be the side (in metres) of the square base. Express the total cost \( C \) of constructing the tank in terms of \( x \) only.

Solution

  1. Step 1: Write the volume constraint: The tank has a square base of side \( x \) metres and depth \( h \) metres, so its volume is \[ V = x^2 \cdot h \] Since the required capacity is \( 400 \text{ m}^3 \), we have \[ x^2 h = 400 \]
  2. Step 2: Express depth h in terms of x: From the volume equation, solving for \( h \): \[ h = \frac{400}{x^2} \]
  3. Step 3: Write the cost of land: The cost of land depends on the area of the square base, which is \( x^2 \) square metres. At ₹ 8,000 per square metre: \[ C_{\text{land}} = 8000 \, x^2 \]
  4. Step 4: Write the cost of construction (digging): The cost of construction for the whole tank is ₹ \( 50000 \, h^2 \). Substituting \( h = \dfrac{400}{x^2} \): \[ C_{\text{dig}} = 50000 \left( \frac{400}{x^2} \right)^2 = 50000 \ \cdot \ \frac{160000}{x^4} = \frac{8000000000}{x^4} \]
  5. Step 5: Write the total cost C in terms of x: Adding both components: \[ C(x) = C_{\text{land}} + C_{\text{dig}} = 8000 \, x^2 + \frac{8000000000}{x^4} \] This is the required total cost function in terms of \( x \).

Answer: \[ C(x) = 8000\,x^2 + \frac{8000000000}{x^4} \] rupees, where \( x \) is the side of the square base in metres.

Everything you get with Solver7

More questions in Application of Derivatives

Chapter 6 Examples Q1 Chapter 6 Examples Q2 Chapter 6 Examples Q3 Chapter 6 Examples Q4 65/1/1 2024 / Section A Q4 Chapter 6 Examples Q5 65(B) 2026 / Section A Q5 65/2/1 2024 / Section A Q5 65/3/1 2024 / Section A Q5 Chapter 6 Examples Q6 65/4/1 2026 / Section A Q6 Chapter 6 Examples Q7 65/1/1 2026 / Section A Q7 Chapter 6 Examples Q8 Chapter 6 Examples Q9(i) 65/3/1 2026 / Section A Q9 65/5/1 2026 / Section A Q9 Chapter 6 Examples Q9(ii) Chapter 6 Examples Q9(iii) Chapter 6 Examples Q10 Chapter 6 Examples Q11 65/2/3 2026 / Section A Q13 Chapter 6 Examples Q12 Chapter 6 Examples Q13 Chapter 6 Examples Q14 65/1/1 2023 / Section A Q16 Chapter 6 Examples Q15 Chapter 6 Examples Q16 65/4/2 2024 / Section A Q18 Chapter 6 Examples Q17 65(B) 2026 / Section A Q19 Chapter 6 Examples Q18 Chapter 6 Examples Q19 65/4/2 2024 / Section B Q21 Chapter 6 Examples Q20 65/3/1 2026 / Section B Q22 Chapter 6 Examples Q21 65(B) 2026 / Section B Q22(a) 65/1/1 2024 / Section B Q22 65/1/1 2026 / Section B Q22 65/3/1 2023 / Section B Q23 Chapter 6 Examples Q22 65(B) 2026 / Section B Q22(b) 65/4/1 2023 / Section B Q23 65/4/1 2026 / Section B Q23 65/4/2 2024 / Section B Q23 65/5/1 2026 / Section B Q23 Chapter 6 Examples Q23 65/2/1 2024 / Section B Q23 65/2/3 2026 / Section B Q24(a) Chapter 6 Examples Q24 65/2/3 2026 / Section B Q24(b) Chapter 6 Examples Q25 65/1/1 2023 / Section B Q25 65/2/1 2024 / Section B Q25 65/2/2 2023 / Section B Q25 Chapter 6 Examples Q26 Chapter 6 Examples Q27 Chapter 6 Examples Q28 65/3/1 2024 / Section C Q27(a)