SOLVER7 Study. Nothing Else.
2023 Board Paper Q37(iii)a

A tank, as shown in the figure below, formed using a combination of a cylinder and a cone, offers better drainage as compared to a flat bottomed tank. A tap is connected to such a tank whose conical part is full of water. Water is dripping out from a tap at the bottom at the uniform rate of \(2 cm^3/s.\) The semi-vertical angle of the conical tank is \(45^\circ.\)On the basis of given information, answer the following questions : Find the rate at which the wet surface of the conical tank is decreasing at an instant when radius \(r=2\sqrt{2}cm,\)

CBSE Class 12 Maths · Application of Derivatives

Solution

👶 Simple Explanation

Simple Explanation

Imagine a cone-shaped funnel slowly draining water. The wet part of the funnel wall gets smaller as water flows out. Because the cone has a special shape — equally wide as it is tall — the math becomes much simpler. We track how fast the watery area shrinks by watching how fast the water level drops. It is like watching a muddy ring on a glass shrink as you drink — the ring gets smaller bit by bit as the liquid level goes down.

Answer: The wet surface of the conical tank is decreasing at the rate of \(2\ \text{cm}^2/s\) when \(r = 2\sqrt{2}\ \text{cm}\). (The negative sign shows a decrease.)

📖 Rate of Decrease of Wet Surface of a Conical Tank

Detailed Explanation

This is a related rates problem from Application of Derivatives. As water drains from the conical part of the tank, the amount of water left decreases, so the water surface (the part of the cone that stays wet) shrinks. The 'wet surface' here is the curved (lateral) surface of the cone in contact with water. For a cone with semi-vertical angle \(45^\circ\), the relation between the radius \(r\) and the height \(h\) of the water level is \(\tan 45^\circ = \dfrac{r}{h}\), which gives \(r = h\). This simple relation lets us write both the volume and the curved surface area in terms of one variable, \(r\). We then use the chain rule to connect the known rate \(\dfrac{dV}{dt}\) with the unknown rate \(\dfrac{dS}{dt}\).

Formula Used

Volume of cone: \(V = \dfrac{1}{3}\pi r^2 h\). Curved surface area: \(S = \pi r l\), where slant height \(l = \sqrt{r^2 + h^2}\). Chain rule: \(\dfrac{dV}{dt} = \dfrac{dV}{dr}\cdot\dfrac{dr}{dt}\) and \(\dfrac{dS}{dt} = \dfrac{dS}{dr}\cdot\dfrac{dr}{dt}\).

Solution

  1. Step 1: Use the semi-vertical angle to relate \(r\) and \(h\). Since the semi-vertical angle is \(45^\circ\), \[\tan 45^\circ = \frac{r}{h} = 1 \Rightarrow r = h.\] This means the radius of the water surface always equals its height.
  2. Step 2: Express the volume of water in terms of \(r\) only. Substituting \(h = r\) into \(V = \dfrac{1}{3}\pi r^2 h\): \[V = \frac{1}{3}\pi r^2 (r) = \frac{1}{3}\pi r^3.\]
  3. Step 3: Differentiate the volume with respect to time \(t\). \[\frac{dV}{dt} = \pi r^2 \frac{dr}{dt}.\] Water is dripping out at \(2 \text{ cm}^3/s\), so the volume is decreasing: \[\frac{dV}{dt} = -2.\]
  4. Step 4: Find \(\dfrac{dr}{dt}\) at \(r = 2\sqrt{2}\). \[-2 = \pi (2\sqrt{2})^2 \frac{dr}{dt} = \pi (8)\frac{dr}{dt}.\] So \[\frac{dr}{dt} = \frac{-2}{8\pi} = \frac{-1}{4\pi}\ \text{cm/s}.\]
  5. Step 5: Express the wet (curved) surface area in terms of \(r\). The slant height is \[l = \sqrt{r^2 + h^2} = \sqrt{r^2 + r^2} = \sqrt{2}\,r.\] Therefore \[S = \pi r l = \pi r (\sqrt{2}\,r) = \sqrt{2}\,\pi r^2.\]
  6. Step 6: Differentiate the surface area with respect to \(t\). \[\frac{dS}{dt} = 2\sqrt{2}\,\pi r \frac{dr}{dt}.\]
  7. Step 7: Substitute \(r = 2\sqrt{2}\) and \(\dfrac{dr}{dt} = \dfrac{-1}{4\pi}\). \[\frac{dS}{dt} = 2\sqrt{2}\,\pi (2\sqrt{2})\left(\frac{-1}{4\pi}\right).\] Now simplify \(2\sqrt{2}\cdot 2\sqrt{2} = 8\): \[\frac{dS}{dt} = 8\pi \left(\frac{-1}{4\pi}\right) = -2\ \text{cm}^2/s.\]

Final Answer

The wet surface of the conical tank is decreasing at the rate of \(2\ \text{cm}^2/s\) when \(r = 2\sqrt{2}\ \text{cm}\). (The negative sign shows a decrease.)

Common Mistake

A common mistake is forgetting the negative sign for \(\dfrac{dV}{dt}\). Since water is draining out, the volume decreases, so \(\dfrac{dV}{dt} = -2\), not \(+2\). Another error is using the wrong surface formula — you must use the curved surface \(S = \pi r l\) (with \(l = \sqrt{2}\,r\)), not \(\pi r^2\) or the total surface area.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Use the semi-vertical angle to relate r and h: Since the semi-vertical angle of the cone is \(45^\circ\), we write \[\tan 45^\circ = \frac{r}{h}\] Since \(\tan 45^\circ = 1\), this gives \(r = h\). Reason: This single relationship lets us eliminate one variable and express everything in terms of \(r\) alone.
  2. Step 2: Write volume entirely in terms of r: Substituting \(h = r\) into the volume formula \(V = \frac{1}{3}\pi r^2 h\): \[V = \frac{1}{3}\pi r^2 \cdot r = \frac{1}{3}\pi r^3\] Reason: Reducing to one variable makes differentiation straightforward.
  3. Step 3: Differentiate the volume with respect to time: Differentiating \(V = \frac{1}{3}\pi r^3\) with respect to \(t\) using the chain rule: \[\frac{dV}{dt} = \pi r^2 \frac{dr}{dt}\] We are told water drains at \(\frac{dV}{dt} = -2\) cm\(^3\)/s (negative because volume decreases). So: \[-2 = \pi r^2 \frac{dr}{dt}\] Solving for \(\frac{dr}{dt}\): \[\frac{dr}{dt} = \frac{-2}{\pi r^2}\] Reason: We need \(\frac{dr}{dt}\) as a bridge between the volume rate and the surface area rate.
  4. Step 4: Write the curved surface area in terms of r: With \(h = r\), the slant height becomes \[l = \sqrt{r^2 + h^2} = \sqrt{r^2 + r^2} = r\sqrt{2}\] So the curved surface area is \[S = \pi r l = \pi r \cdot r\sqrt{2} = \sqrt{2}\,\pi r^2\] Reason: Expressing \(S\) purely in terms of \(r\) allows us to differentiate and apply the chain rule.
  5. Step 5: Differentiate the surface area with respect to time: Differentiating \(S = \sqrt{2}\,\pi r^2\) with respect to \(t\): \[\frac{dS}{dt} = 2\sqrt{2}\,\pi r \cdot \frac{dr}{dt}\] Reason: This gives us \(\frac{dS}{dt}\), the rate of change of the wet surface area, in terms of \(r\) and \(\frac{dr}{dt}\).
  6. Step 6: Substitute the expression for dr/dt: Substituting \(\frac{dr}{dt} = \frac{-2}{\pi r^2}\) into \(\frac{dS}{dt} = 2\sqrt{2}\,\pi r \cdot \frac{dr}{dt}\): \[\frac{dS}{dt} = 2\sqrt{2}\,\pi r \cdot \frac{-2}{\pi r^2} = \frac{-4\sqrt{2}}{r}\] Reason: This expresses the rate of surface area change purely in terms of \(r\), so we can evaluate it at the given moment.
  7. Step 7: Evaluate at the given radius: We are asked for the rate when \(r = 2\sqrt{2}\) cm. Substituting: \[\frac{dS}{dt} = \frac{-4\sqrt{2}}{2\sqrt{2}} = \frac{-4\sqrt{2}}{2\sqrt{2}} = -2\] So \(\frac{dS}{dt} = -2\) cm\(^2\)/s. Reason: The negative sign confirms the wet surface area is shrinking, which makes physical sense as water drains out.

Final Answer

The wet surface of the conical tank is decreasing at the rate of \(2\ \text{cm}^2/s\) when \(r = 2\sqrt{2}\ \text{cm}\). (The negative sign shows a decrease.)

Common Mistake

One common mistake: Students forget that the rate of volume change is negative (\(\frac{dV}{dt} = -2\), not \(+2\)) because water is draining out, causing them to get a positive value for \(\frac{dS}{dt}\) and incorrectly conclude the wet surface is increasing.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given \(\dfrac{dV}{dt} = -2 \, \text{cm}^3/\text{s}\) and semi-vertical angle \(45^\circ\), so \(r = h\). Thus \(V = \dfrac{1}{3}\pi r^3\), giving \(\dfrac{dV}{dt} = \pi r^2 \dfrac{dr}{dt}\), so \(\dfrac{dr}{dt} = \dfrac{-2}{\pi r^2}\).
  2. Step 2: Slant height \(l = \sqrt{r^2 + h^2} = r\sqrt{2}\), so \(S = \pi r \cdot r\sqrt{2} = \sqrt{2}\,\pi r^2\). Differentiating: \(\dfrac{dS}{dt} = 2\sqrt{2}\,\pi r \dfrac{dr}{dt}\).
  3. Step 3: At \(r = 2\sqrt{2}\): \(\dfrac{dS}{dt} = 2\sqrt{2}\,\pi \cdot 2\sqrt{2} \cdot \dfrac{-2}{\pi (2\sqrt{2})^2} = 2\sqrt{2}\,\pi \cdot 2\sqrt{2} \cdot \dfrac{-2}{8\pi} = 8\pi \cdot \dfrac{-2}{8\pi} = -2 \, \text{cm}^2/\text{s}\).

Answer: The wet surface of the conical tank is decreasing at the rate of \(2\ \text{cm}^2/s\) when \(r = 2\sqrt{2}\ \text{cm}\). (The negative sign shows a decrease.)

➕ More Examples

More Examples

Example 1

Question: A conical tank (vertex at the bottom) is draining water from a tap at a uniform rate of \( 3 \text{ cm}^3/\text{s} \). The semi-vertical angle of the cone is \( 30^\circ \). Find the rate at which the wet curved surface area of the conical tank is decreasing when the radius of the water surface is \( r = 3 \text{ cm} \).

Solution: Step 1: Set up the geometry. The semi-vertical angle is \( 30^\circ \), so \( \tan 30^\circ = \frac{r}{h} \), giving \( h = r \cot 30^\circ = r\sqrt{3} \). The slant height is \[ l = \sqrt{r^2 + h^2} = \sqrt{r^2 + 3r^2} = 2r. \] Step 2: Express volume in terms of \( r \). \[ V = \frac{1}{3}\pi r^2 h = \frac{1}{3}\pi r^2 (r\sqrt{3}) = \frac{\sqrt{3}\,\pi r^3}{3}. \] Differentiating with respect to \( t \): \[ \frac{dV}{dt} = \frac{\sqrt{3}\,\pi}{3} \cdot 3r^2 \frac{dr}{dt} = \sqrt{3}\,\pi r^2 \frac{dr}{dt}. \] Since water is draining, \( \frac{dV}{dt} = -3 \text{ cm}^3/\text{s} \). At \( r = 3 \): \[ -3 = \sqrt{3}\,\pi (3)^2 \frac{dr}{dt} = 9\sqrt{3}\,\pi \frac{dr}{dt}. \] Solving: \[ \frac{dr}{dt} = \frac{-3}{9\sqrt{3}\,\pi} = \frac{-1}{3\sqrt{3}\,\pi}. \] Step 3: Express curved surface area in terms of \( r \). Since \( l = 2r \): \[ S = \pi r l = \pi r (2r) = 2\pi r^2. \] Differentiating with respect to \( t \): \[ \frac{dS}{dt} = 4\pi r \frac{dr}{dt}. \] Step 4: Substitute \( r = 3 \) and \( \frac{dr}{dt} = \frac{-1}{3\sqrt{3}\,\pi} \): \[ \frac{dS}{dt} = 4\pi (3) \cdot \frac{-1}{3\sqrt{3}\,\pi} = \frac{-12\pi}{3\sqrt{3}\,\pi} = \frac{-4}{\sqrt{3}} = \frac{-4\sqrt{3}}{3} \text{ cm}^2/\text{s}. \] The negative sign confirms the surface area is decreasing. Therefore, the wet curved surface area is decreasing at the rate of \( \dfrac{4\sqrt{3}}{3} \text{ cm}^2/\text{s} \).

Answer: The wet curved surface area is decreasing at \( \dfrac{4\sqrt{3}}{3} \text{ cm}^2/\text{s} \approx 2.31 \text{ cm}^2/\text{s} \).

Example 2

Question: Water is leaking from a conical vessel (vertex downward) at the rate of \( 4 \text{ cm}^3/\text{s} \). The semi-vertical angle of the cone is \( 60^\circ \). Find the rate at which the wet curved surface area of the conical vessel is decreasing when the radius of the water level is \( r = 2 \text{ cm} \).

Solution: Step 1: Set up the geometry. The semi-vertical angle is \( 60^\circ \), so \( \tan 60^\circ = \frac{r}{h} \), giving \( h = r \cot 60^\circ = \frac{r}{\sqrt{3}} \). The slant height is \[ l = \sqrt{r^2 + h^2} = \sqrt{r^2 + \frac{r^2}{3}} = \sqrt{\frac{4r^2}{3}} = \frac{2r}{\sqrt{3}}. \] Step 2: Express volume in terms of \( r \). \[ V = \frac{1}{3}\pi r^2 h = \frac{1}{3}\pi r^2 \cdot \frac{r}{\sqrt{3}} = \frac{\pi r^3}{3\sqrt{3}}. \] Differentiating with respect to \( t \): \[ \frac{dV}{dt} = \frac{\pi}{3\sqrt{3}} \cdot 3r^2 \frac{dr}{dt} = \frac{\pi r^2}{\sqrt{3}} \frac{dr}{dt}. \] Since water is leaking, \( \frac{dV}{dt} = -4 \). At \( r = 2 \): \[ -4 = \frac{\pi (2)^2}{\sqrt{3}} \frac{dr}{dt} = \frac{4\pi}{\sqrt{3}} \frac{dr}{dt}. \] Solving: \[ \frac{dr}{dt} = \frac{-4\sqrt{3}}{4\pi} = \frac{-\sqrt{3}}{\pi}. \] Step 3: Express curved surface area in terms of \( r \). Since \( l = \frac{2r}{\sqrt{3}} \): \[ S = \pi r l = \pi r \cdot \frac{2r}{\sqrt{3}} = \frac{2\pi r^2}{\sqrt{3}}. \] Differentiating with respect to \( t \): \[ \frac{dS}{dt} = \frac{4\pi r}{\sqrt{3}} \frac{dr}{dt}. \] Step 4: Substitute \( r = 2 \) and \( \frac{dr}{dt} = \frac{-\sqrt{3}}{\pi} \): \[ \frac{dS}{dt} = \frac{4\pi (2)}{\sqrt{3}} \cdot \frac{-\sqrt{3}}{\pi} = \frac{8\pi}{\sqrt{3}} \cdot \frac{-\sqrt{3}}{\pi} = -8 \text{ cm}^2/\text{s}. \] The negative sign confirms the surface area is decreasing. Therefore, the wet curved surface area is decreasing at the rate of \( 8 \text{ cm}^2/\text{s} \).

Answer: The wet curved surface area is decreasing at \( 8 \text{ cm}^2/\text{s} \).

🎯 Try a Similar Question

Try a Similar Question

Question: A conical tank (vertex at the bottom) is full of water. Water drips out from a tap at the bottom at a uniform rate of \( 3 \, \text{cm}^3/\text{s} \). The semi-vertical angle of the conical tank is \( 30^\circ \). Find the rate at which the wet curved surface area of the conical tank is decreasing when the radius of the water surface is \( r = 3 \, \text{cm} \).

Solution

  1. Step 1: Relate height to radius using the semi-vertical angle: The semi-vertical angle is \( 30^\circ \), so \( \tan 30^\circ = \frac{r}{h} \), which gives \( \frac{1}{\sqrt{3}} = \frac{r}{h} \). Therefore \( h = r\sqrt{3} \).
  2. Step 2: Express volume in terms of radius only: Volume of the conical water body: \[ V = \frac{1}{3}\pi r^2 h = \frac{1}{3}\pi r^2 (r\sqrt{3}) = \frac{\pi \sqrt{3}}{3} r^3 \]
  3. Step 3: Differentiate volume with respect to time: Differentiating both sides with respect to \( t \): \[ \frac{dV}{dt} = \frac{\pi \sqrt{3}}{3} \cdot 3r^2 \frac{dr}{dt} = \pi \sqrt{3}\, r^2 \frac{dr}{dt} \] Since water is dripping out, \( \frac{dV}{dt} = -3 \, \text{cm}^3/\text{s} \). So: \[ -3 = \pi \sqrt{3}\, r^2 \frac{dr}{dt} \] Therefore \[ \frac{dr}{dt} = \frac{-3}{\pi \sqrt{3}\, r^2} = \frac{-\sqrt{3}}{\pi r^2} \]
  4. Step 4: Express the slant height in terms of radius: The slant height \( l \) satisfies \( \sin 30^\circ = \frac{r}{l} \), so \( \frac{1}{2} = \frac{r}{l} \), giving \( l = 2r \).
  5. Step 5: Express the wet curved surface area in terms of radius: The wet curved surface area of the cone is: \[ S = \pi r l = \pi r (2r) = 2\pi r^2 \]
  6. Step 6: Differentiate the surface area with respect to time: Differentiating \( S = 2\pi r^2 \) with respect to \( t \): \[ \frac{dS}{dt} = 4\pi r \frac{dr}{dt} \] Substituting \( \frac{dr}{dt} = \frac{-\sqrt{3}}{\pi r^2} \): \[ \frac{dS}{dt} = 4\pi r \cdot \frac{-\sqrt{3}}{\pi r^2} = \frac{-4\sqrt{3}}{r} \]
  7. Step 7: Substitute r = 3 cm: At \( r = 3 \, \text{cm} \): \[ \frac{dS}{dt} = \frac{-4\sqrt{3}}{3} \, \text{cm}^2/\text{s} \] The negative sign confirms the surface area is decreasing.

Answer: The wet curved surface area of the conical tank is decreasing at the rate of \( \dfrac{4\sqrt{3}}{3} \, \text{cm}^2/\text{s} \) when \( r = 3 \, \text{cm} \). (The negative sign indicates a decrease.)

Everything you get with Solver7

More questions in Application of Derivatives

Chapter 6 Examples Q1 Chapter 6 Examples Q2 Chapter 6 Examples Q3 Chapter 6 Examples Q4 65/1/1 2024 / Section A Q4 Chapter 6 Examples Q5 65(B) 2026 / Section A Q5 65/2/1 2024 / Section A Q5 65/3/1 2024 / Section A Q5 Chapter 6 Examples Q6 65/4/1 2026 / Section A Q6 Chapter 6 Examples Q7 65/1/1 2026 / Section A Q7 Chapter 6 Examples Q8 Chapter 6 Examples Q9(i) 65/3/1 2026 / Section A Q9 65/5/1 2026 / Section A Q9 Chapter 6 Examples Q9(ii) Chapter 6 Examples Q9(iii) Chapter 6 Examples Q10 Chapter 6 Examples Q11 65/2/3 2026 / Section A Q13 Chapter 6 Examples Q12 Chapter 6 Examples Q13 Chapter 6 Examples Q14 65/1/1 2023 / Section A Q16 Chapter 6 Examples Q15 Chapter 6 Examples Q16 65/4/2 2024 / Section A Q18 Chapter 6 Examples Q17 65(B) 2026 / Section A Q19 Chapter 6 Examples Q18 Chapter 6 Examples Q19 65/4/2 2024 / Section B Q21 Chapter 6 Examples Q20 65/3/1 2026 / Section B Q22 Chapter 6 Examples Q21 65(B) 2026 / Section B Q22(a) 65/1/1 2024 / Section B Q22 65/1/1 2026 / Section B Q22 65/3/1 2023 / Section B Q23 Chapter 6 Examples Q22 65(B) 2026 / Section B Q22(b) 65/4/1 2023 / Section B Q23 65/4/1 2026 / Section B Q23 65/4/2 2024 / Section B Q23 65/5/1 2026 / Section B Q23 Chapter 6 Examples Q23 65/2/1 2024 / Section B Q23 65/2/3 2026 / Section B Q24(a) Chapter 6 Examples Q24 65/2/3 2026 / Section B Q24(b) Chapter 6 Examples Q25 65/1/1 2023 / Section B Q25 65/2/1 2024 / Section B Q25 65/2/2 2023 / Section B Q25 Chapter 6 Examples Q26 Chapter 6 Examples Q27 Chapter 6 Examples Q28 65/3/1 2024 / Section C Q27(a)