Find the mean, variance and standard deviation using short-cut method
CBSE Class 11 Maths · Statistics
CBSE Class 11 Maths · Statistics
Imagine measuring the heights of many children and writing them in groups, like 70–75 cm, 75–80 cm, and so on. We pick the middle value of each group to represent it. Then we find the average height, which tells us the typical height. We also check how spread out the heights are — this spread is called variance, and its square root is the standard deviation. A small standard deviation means most children have similar heights, while a big one means heights vary a lot.
Answer: Mean \( \bar{x} = 93 \) cm, Variance \( \sigma^2 \approx 105.58 \), and Standard Deviation \( \sigma \approx 10.28 \) cm.
The data gives class intervals of height (in cm) with the number of children (frequency) in each class. Since the data is grouped, we first find the mid-point (class mark) of each interval. The short-cut method makes calculations easier by choosing an assumed mean \( A \) and a class width \( h \), then converting each mid-point \( x_i \) into a small integer \( y_i = \frac{x_i - A}{h} \). We compute the mean and variance using these smaller numbers and finally convert back. Variance measures how spread out the data is from the mean, and standard deviation is the square root of variance.
Class mark: \( x_i = \frac{\text{lower limit} + \text{upper limit}}{2} \). Let \( y_i = \frac{x_i - A}{h} \). Mean: \[ \bar{x} = A + h \cdot \frac{\sum f_i y_i}{\sum f_i} \] Variance: \[ \sigma^2 = h^2 \left[ \frac{\sum f_i y_i^2}{N} - \left( \frac{\sum f_i y_i}{N} \right)^2 \right] \] Standard deviation: \( \sigma = \sqrt{\sigma^2} \), where \( N = \sum f_i \).
Mean \( \bar{x} = 93 \) cm, Variance \( \sigma^2 \approx 105.58 \), and Standard Deviation \( \sigma \approx 10.28 \) cm.
A common mistake is to forget to multiply the variance of the \( y_i \) values by \( h^2 \). Since we scaled each deviation by dividing by \( h \), the variance must be scaled back by multiplying with \( h^2 \); leaving it out gives a wrongly small variance and standard deviation.
Mean \( \bar{x} = 93 \) cm, Variance \( \sigma^2 \approx 105.58 \), and Standard Deviation \( \sigma \approx 10.28 \) cm.
One common mistake: Students sometimes compute \( \left(\dfrac{\sum f_i y_i^2}{N}\right)^2 \) instead of \( \left(\dfrac{\sum f_i y_i}{N}\right)^2 \) in the variance formula — remember, it is the ratio \( \dfrac{\sum f_i y_i}{N} \) that gets squared, not \( \dfrac{\sum f_i y_i^2}{N} \).
Answer: Mean \( \bar{x} = 93 \) cm, Variance \( \sigma^2 \approx 105.58 \), and Standard Deviation \( \sigma \approx 10.28 \) cm.
Question: Find the mean, variance and standard deviation using the short-cut method for the following frequency distribution: Class Interval: 10–20, 20–30, 30–40, 40–50, 50–60 Frequency: 4, 8, 14, 10, 4
Solution: Step 1: Find the mid-values \( x_i \) of each class interval. Mid-values: \( x_1 = 15,\ x_2 = 25,\ x_3 = 35,\ x_4 = 45,\ x_5 = 55 \) Step 2: Choose assumed mean \( A = 35 \) (mid-value of the middle class). Compute deviations \( d_i = x_i - 35 \): \( d_1 = 15 - 35 = -20 \) \( d_2 = 25 - 35 = -10 \) \( d_3 = 35 - 35 = 0 \) \( d_4 = 45 - 35 = 10 \) \( d_5 = 55 - 35 = 20 \) Step 3: Build the computation table. For class 10–20: \( f_1 = 4,\ d_1 = -20,\ f_1 d_1 = -80,\ f_1 d_1^2 = 1600 \) For class 20–30: \( f_2 = 8,\ d_2 = -10,\ f_2 d_2 = -80,\ f_2 d_2^2 = 800 \) For class 30–40: \( f_3 = 14,\ d_3 = 0,\ f_3 d_3 = 0,\ f_3 d_3^2 = 0 \) For class 40–50: \( f_4 = 10,\ d_4 = 10,\ f_4 d_4 = 100,\ f_4 d_4^2 = 1000 \) For class 50–60: \( f_5 = 4,\ d_5 = 20,\ f_5 d_5 = 80,\ f_5 d_5^2 = 1600 \) Step 4: Compute the totals. \[ \sum f_i = 4 + 8 + 14 + 10 + 4 = 40 \] \[ \sum f_i d_i = -80 + (-80) + 0 + 100 + 80 = 20 \] \[ \sum f_i d_i^2 = 1600 + 800 + 0 + 1000 + 1600 = 5000 \] Step 5: Compute the mean. \[ \bar{x} = A + \frac{\sum f_i d_i}{\sum f_i} = 35 + \frac{20}{40} = 35 + 0.5 = 35.5 \] Step 6: Compute the variance. \[ \sigma^2 = \frac{\sum f_i d_i^2}{\sum f_i} - \left( \frac{\sum f_i d_i}{\sum f_i} \right)^2 \] \[ \sigma^2 = \frac{5000}{40} - \left( \frac{20}{40} \right)^2 = 125 - (0.5)^2 = 125 - 0.25 = 124.75 \] Step 7: Compute the standard deviation. \[ \sigma = \sqrt{124.75} \approx 11.17 \]
Answer: Mean \( \bar{x} = 35.5 \), Variance \( \sigma^2 = 124.75 \), Standard Deviation \( \sigma \approx 11.17 \)
Question: The following data gives the marks obtained by 50 students in a test. Find the mean, variance and standard deviation using the short-cut method. Marks: 5, 10, 15, 20, 25 Frequency: 6, 12, 16, 11, 5
Solution: Step 1: The data is already ungrouped with distinct values \( x_i \). Values: \( x_1 = 5,\ x_2 = 10,\ x_3 = 15,\ x_4 = 20,\ x_5 = 25 \) Step 2: Choose assumed mean \( A = 15 \) (the middle value). Compute deviations \( d_i = x_i - 15 \): \( d_1 = 5 - 15 = -10 \) \( d_2 = 10 - 15 = -5 \) \( d_3 = 15 - 15 = 0 \) \( d_4 = 20 - 15 = 5 \) \( d_5 = 25 - 15 = 10 \) Step 3: Build the computation table. For \( x_1 = 5 \): \( f_1 = 6,\ d_1 = -10,\ f_1 d_1 = -60,\ f_1 d_1^2 = 600 \) For \( x_2 = 10 \): \( f_2 = 12,\ d_2 = -5,\ f_2 d_2 = -60,\ f_2 d_2^2 = 300 \) For \( x_3 = 15 \): \( f_3 = 16,\ d_3 = 0,\ f_3 d_3 = 0,\ f_3 d_3^2 = 0 \) For \( x_4 = 20 \): \( f_4 = 11,\ d_4 = 5,\ f_4 d_4 = 55,\ f_4 d_4^2 = 275 \) For \( x_5 = 25 \): \( f_5 = 5,\ d_5 = 10,\ f_5 d_5 = 50,\ f_5 d_5^2 = 500 \) Step 4: Compute the totals. \[ \sum f_i = 6 + 12 + 16 + 11 + 5 = 50 \] \[ \sum f_i d_i = -60 + (-60) + 0 + 55 + 50 = -15 \] \[ \sum f_i d_i^2 = 600 + 300 + 0 + 275 + 500 = 1675 \] Step 5: Compute the mean. \[ \bar{x} = A + \frac{\sum f_i d_i}{\sum f_i} = 15 + \frac{-15}{50} = 15 - 0.3 = 14.7 \] Step 6: Compute the variance. \[ \sigma^2 = \frac{\sum f_i d_i^2}{\sum f_i} - \left( \frac{\sum f_i d_i}{\sum f_i} \right)^2 \] \[ \sigma^2 = \frac{1675}{50} - \left( \frac{-15}{50} \right)^2 = 33.5 - (-0.3)^2 = 33.5 - 0.09 = 33.41 \] Step 7: Compute the standard deviation. \[ \sigma = \sqrt{33.41} \approx 5.78 \]
Answer: Mean \( \bar{x} = 14.7 \), Variance \( \sigma^2 = 33.41 \), Standard Deviation \( \sigma \approx 5.78 \)
Question: Find the mean, variance and standard deviation using the short-cut method for the following frequency distribution of marks obtained by 50 students in a class test: Marks: 20, 30, 40, 50, 60, 70, 80 Frequency: 4, 7, 10, 13, 8, 5, 3
Answer: Mean \( \bar{x} = 48.2 \) marks, Variance \( \sigma^2 = 254.76 \), and Standard Deviation \( \sigma \approx 15.96 \) marks.