The diameters of circles \((in\ mm)\) drawn in a design are given below:
CBSE Class 11 Maths · Statistics
CBSE Class 11 Maths · Statistics
Imagine measuring the width of 100 different coins and sorting them into groups by size. The mean tells you the 'typical' width, like finding the middle ground. The standard deviation tells you how spread out the sizes are — are most coins nearly the same width, or do they vary a lot? Here, we sort circle diameters into size groups and do a similar check. A smaller standard deviation means the circles are mostly similar in size.
Answer: Mean diameter \( \bar{x} = 43.5 \) mm and standard deviation \( \sigma \approx 5.55 \) mm.
This is a problem on statistics dealing with a grouped frequency distribution. The classes are given as intervals of diameters and the frequencies are the number of circles in each class. To measure how spread out the data is, we use the standard deviation. First we find the class marks (midpoints) of each interval, then compute the mean, and finally the variance and standard deviation. Since the class marks are large numbers, we use the step-deviation method to make the calculation simpler. From the image the data is: class intervals 33-36, 37-40, 41-44, 45-48, 49-52 with frequencies 15, 17, 21, 22, 25 respectively.
Class mark \( x_i = \frac{\text{lower limit} + \text{upper limit}}{2} \). Using step deviation \( d_i = \frac{x_i - A}{h} \), \[ \bar{x} = A + h \cdot \frac{\sum f_i d_i}{\sum f_i} \] \[ \sigma = h \sqrt{ \frac{\sum f_i d_i^2}{N} - \left( \frac{\sum f_i d_i}{N} \right)^2 } \]
Mean diameter \( \bar{x} = 43.5 \) mm and standard deviation \( \sigma \approx 5.55 \) mm.
A common mistake is to multiply the standard deviation of the step deviations by \( h \) only for the mean but forgetting the factor \( h \) in the standard deviation formula, or squaring \( \frac{\sum f_i d_i}{N} \) incorrectly. Remember both \( \bar{x} \) and \( \sigma \) must be multiplied by \( h = 4 \) to convert back to actual units.
Mean diameter \( \bar{x} = 43.5 \) mm and standard deviation \( \sigma \approx 5.55 \) mm.
One common mistake: Students often forget to multiply by the class width \( h \) when converting from step-deviation standard deviation back to the original scale — omitting the factor of \( h = 4 \) gives a result that is four times too small.
Answer: Mean diameter \( \bar{x} = 43.5 \) mm and standard deviation \( \sigma \approx 5.55 \) mm.
Question: The weights (in kg) of students in a class are recorded in the following frequency distribution. Find the mean, variance, and standard deviation. Weight (kg): 40–44, 44–48, 48–52, 52–56, 56–60 Number of students: 4, 8, 14, 10, 4
Solution: Step 1: Find the midpoints \( x_i \) of each class interval. Midpoints: \( x_1 = 42,\; x_2 = 46,\; x_3 = 50,\; x_4 = 54,\; x_5 = 58 \) Frequencies: \( f_1 = 4,\; f_2 = 8,\; f_3 = 14,\; f_4 = 10,\; f_5 = 4 \) Total frequency: \[N = 4 + 8 + 14 + 10 + 4 = 40\] Step 2: Compute \( f_i x_i \) for each class. \( f_1 x_1 = 4 \times 42 = 168 \) \( f_2 x_2 = 8 \times 46 = 368 \) \( f_3 x_3 = 14 \times 50 = 700 \) \( f_4 x_4 = 10 \times 54 = 540 \) \( f_5 x_5 = 4 \times 58 = 232 \) \[\sum f_i x_i = 168 + 368 + 700 + 540 + 232 = 2008\] Step 3: Compute the mean. \[\bar{x} = \frac{\sum f_i x_i}{N} = \frac{2008}{40} = 50.2\] Step 4: Compute \( (x_i - \bar{x}) \) and \( (x_i - \bar{x})^2 \) for each class. For \( x_1 = 42 \): \( x_1 - \bar{x} = 42 - 50.2 = -8.2 \), so \( (x_1 - \bar{x})^2 = 67.24 \) For \( x_2 = 46 \): \( x_2 - \bar{x} = 46 - 50.2 = -4.2 \), so \( (x_2 - \bar{x})^2 = 17.64 \) For \( x_3 = 50 \): \( x_3 - \bar{x} = 50 - 50.2 = -0.2 \), so \( (x_3 - \bar{x})^2 = 0.04 \) For \( x_4 = 54 \): \( x_4 - \bar{x} = 54 - 50.2 = 3.8 \), so \( (x_4 - \bar{x})^2 = 14.44 \) For \( x_5 = 58 \): \( x_5 - \bar{x} = 58 - 50.2 = 7.8 \), so \( (x_5 - \bar{x})^2 = 60.84 \) Step 5: Compute \( f_i (x_i - \bar{x})^2 \) for each class. \( f_1 (x_1 - \bar{x})^2 = 4 \times 67.24 = 268.96 \) \( f_2 (x_2 - \bar{x})^2 = 8 \times 17.64 = 141.12 \) \( f_3 (x_3 - \bar{x})^2 = 14 \times 0.04 = 0.56 \) \( f_4 (x_4 - \bar{x})^2 = 10 \times 14.44 = 144.40 \) \( f_5 (x_5 - \bar{x})^2 = 4 \times 60.84 = 243.36 \) \[\sum f_i (x_i - \bar{x})^2 = 268.96 + 141.12 + 0.56 + 144.40 + 243.36 = 798.40\] Step 6: Compute the variance. \[\sigma^2 = \frac{\sum f_i (x_i - \bar{x})^2}{N} = \frac{798.40}{40} = 19.96\] Step 7: Compute the standard deviation. \[\sigma = \sqrt{19.96} \approx 4.47 \text{ kg}\]
Answer: Mean \( \bar{x} = 50.2 \) kg, Variance \( \sigma^2 = 19.96 \), Standard Deviation \( \sigma \approx 4.47 \) kg
Question: The number of hours per week spent on studying by students in a school are distributed as follows. Find the mean deviation about the mean. Hours per week: 5–9, 9–13, 13–17, 17–21, 21–25 Number of students: 6, 10, 20, 9, 5
Solution: Step 1: Find the midpoints \( x_i \) of each class interval. \( x_1 = 7,\; x_2 = 11,\; x_3 = 15,\; x_4 = 19,\; x_5 = 23 \) Frequencies: \( f_1 = 6,\; f_2 = 10,\; f_3 = 20,\; f_4 = 9,\; f_5 = 5 \) Total frequency: \[N = 6 + 10 + 20 + 9 + 5 = 50\] Step 2: Compute \( f_i x_i \) for each class. \( f_1 x_1 = 6 \times 7 = 42 \) \( f_2 x_2 = 10 \times 11 = 110 \) \( f_3 x_3 = 20 \times 15 = 300 \) \( f_4 x_4 = 9 \times 19 = 171 \) \( f_5 x_5 = 5 \times 23 = 115 \) \[\sum f_i x_i = 42 + 110 + 300 + 171 + 115 = 738\] Step 3: Compute the mean. \[\bar{x} = \frac{738}{50} = 14.76\] Step 4: Compute \( |x_i - \bar{x}| \) for each class. For \( x_1 = 7 \): \( |7 - 14.76| = 7.76 \) For \( x_2 = 11 \): \( |11 - 14.76| = 3.76 \) For \( x_3 = 15 \): \( |15 - 14.76| = 0.24 \) For \( x_4 = 19 \): \( |19 - 14.76| = 4.24 \) For \( x_5 = 23 \): \( |23 - 14.76| = 8.24 \) Step 5: Compute \( f_i |x_i - \bar{x}| \) for each class. \( f_1 |x_1 - \bar{x}| = 6 \times 7.76 = 46.56 \) \( f_2 |x_2 - \bar{x}| = 10 \times 3.76 = 37.60 \) \( f_3 |x_3 - \bar{x}| = 20 \times 0.24 = 4.80 \) \( f_4 |x_4 - \bar{x}| = 9 \times 4.24 = 38.16 \) \( f_5 |x_5 - \bar{x}| = 5 \times 8.24 = 41.20 \) \[\sum f_i |x_i - \bar{x}| = 46.56 + 37.60 + 4.80 + 38.16 + 41.20 = 168.32\] Step 6: Compute the mean deviation about the mean. \[M.D.(\bar{x}) = \frac{\sum f_i |x_i - \bar{x}|}{N} = \frac{168.32}{50} = 3.3664\] Rounding to two decimal places, \( M.D.(\bar{x}) \approx 3.37 \) hours.
Answer: Mean \( \bar{x} = 14.76 \) hours, Mean Deviation about the Mean \( \approx 3.37 \) hours
Question: The lengths of leaves (in mm) collected from a plant are recorded in the following frequency distribution table: Length (in mm): 20–30, 30–40, 40–50, 50–60, 60–70 Number of leaves: 4, 9, 15, 8, 4 Find the mean length and the standard deviation of the lengths of the leaves.
Answer: Mean length \( \bar{x} = 44.75 \) mm and standard deviation \( \sigma \approx 11.07 \) mm.