Let \(f=\left\{\left(x,\dfrac{x^2}{1+x^2}\right):x\in{R}\right\}\) be a function from \(R\) into \(R\). Determine the range of \(f.\)
CBSE Class 11 Maths · Relations and Functions
CBSE Class 11 Maths · Relations and Functions
Imagine a machine that takes any number, squares it, then divides by something slightly bigger. The output can never be negative, because squaring always gives zero or positive. The output can never quite reach 1, because the bottom of the fraction is always a little larger than the top. When you put in zero, you get zero out. As your input grows really big, the output creeps closer and closer to 1 but never touches it. So every possible output lives between 0 and 1, including 0 but never reaching 1.
Answer: The range of \( f \) is \( [0, 1) \), that is \( \{ y \in \mathbb{R} : 0 \le y < 1 \} \).
The range of a function is the set of all possible output values (y-values) that the function can take. Here the function is \( f(x) = \dfrac{x^2}{1+x^2} \) with domain \( x \in \mathbb{R} \). Since we cannot easily see all outputs by inspection, a reliable method is to set \( y = f(x) \), then solve the equation for \( x^2 \) in terms of \( y \). Because \( x \) is a real number, \( x^2 \) must be greater than or equal to \( 0 \). The values of \( y \) that make \( x^2 \ge 0 \) form the range. We can also understand the answer by noticing that the numerator is always less than the denominator (except when both relate through \( x=0 \)), so the output stays trapped in a bounded interval.
Let \( y = f(x) = \dfrac{x^2}{1+x^2} \). Solve to get \( x^2 = \dfrac{y}{1-y} \), and require \( x^2 \ge 0 \).
The range of \( f \) is \( [0, 1) \), that is \( \{ y \in \mathbb{R} : 0 \le y < 1 \} \).
A common mistake is to include \( y = 1 \) in the range. Since \( x^2 = \dfrac{y}{1-y} \) becomes undefined at \( y = 1 \), the value \( 1 \) is never actually attained, so the interval must be \( [0,1) \) and not \( [0,1] \).
The range of \( f \) is \( [0, 1) \), that is \( \{ y \in \mathbb{R} : 0 \le y < 1 \} \).
One common mistake: Students sometimes write the range as \( [0, 1] \) by assuming y = 1 is achievable, forgetting that y = 1 forces the denominator \( (1 - y) \) to be zero, which means no real x can produce that output.
Answer: The range of \( f \) is \( [0, 1) \), that is \( \{ y \in \mathbb{R} : 0 \le y < 1 \} \).
Question: Let \( f = \left\{ \left( x,\ \dfrac{x^2}{4 + x^2} \right) : x \in \mathbb{R} \right\} \) be a function from \( \mathbb{R} \) into \( \mathbb{R} \). Determine the range of \( f \).
Solution: Let \( y = \dfrac{x^2}{4 + x^2} \), where \( x \in \mathbb{R} \). We solve for \( x^2 \) in terms of \( y \). Multiplying both sides by \( (4 + x^2) \): \[ y(4 + x^2) = x^2 \] \[ 4y + y x^2 = x^2 \] \[ 4y = x^2 - y x^2 \] \[ 4y = x^2 (1 - y) \] \[ x^2 = \frac{4y}{1 - y} \] For \( x \) to be real, we need \( x^2 \ge 0 \). So we require: \[ \frac{4y}{1 - y} \ge 0 \] This inequality holds when the numerator and denominator have the same sign (or the numerator is zero). Case 1: Both non-negative. We need \( 4y \ge 0 \) and \( 1 - y > 0 \), i.e., \( y \ge 0 \) and \( y < 1 \). This gives \( 0 \le y < 1 \). Case 2: Both non-positive. We need \( 4y \le 0 \) and \( 1 - y < 0 \), i.e., \( y \le 0 \) and \( y > 1 \). This is impossible. Also, \( y = 1 \) makes the denominator zero (undefined), so \( y = 1 \) is excluded. Therefore, the valid values of \( y \) are \( 0 \le y < 1 \). Note: When \( x = 0 \), \( y = 0 \), confirming \( y = 0 \) is achieved. As \( x \to \pm\infty \), \( y \to 1 \), but \( y = 1 \) is never reached. Hence the range of \( f \) is \( [0, 1) \).
Answer: Range of \( f \) = \( [0,\ 1) \)
Question: Let \( g : \mathbb{R} \to \mathbb{R} \) be defined by \( g(x) = \dfrac{2x^2}{1 + 2x^2} \). Find the range of \( g \).
Solution: Let \( y = \dfrac{2x^2}{1 + 2x^2} \), where \( x \in \mathbb{R} \). We solve for \( x^2 \) in terms of \( y \). Multiplying both sides by \( (1 + 2x^2) \): \[ y(1 + 2x^2) = 2x^2 \] \[ y + 2y x^2 = 2x^2 \] \[ y = 2x^2 - 2y x^2 \] \[ y = 2x^2(1 - y) \] \[ x^2 = \frac{y}{2(1 - y)} \] For \( x \) to be real, we require \( x^2 \ge 0 \), so: \[ \frac{y}{2(1 - y)} \ge 0 \] Since \( 2 > 0 \), this simplifies to: \[ \frac{y}{1 - y} \ge 0 \] This holds when numerator and denominator have the same sign (or numerator is zero). Case 1: \( y \ge 0 \) and \( 1 - y > 0 \), i.e., \( y \ge 0 \) and \( y < 1 \). This gives \( 0 \le y < 1 \). Case 2: \( y \le 0 \) and \( 1 - y < 0 \), i.e., \( y \le 0 \) and \( y > 1 \). This is impossible. So the valid values are \( 0 \le y < 1 \). We verify: when \( x = 0 \), \( g(0) = 0 \), so \( y = 0 \) is attained. As \( x \to \pm\infty \), \( g(x) \to 1 \) but never equals 1, since that would require \( x^2 \to \infty \). For any \( y \in [0, 1) \), we can find \( x = \sqrt{\dfrac{y}{2(1-y)}} \in \mathbb{R} \), confirming every such \( y \) is achieved. Hence the range of \( g \) is \( [0, 1) \).
Answer: Range of \( g \) = \( [0,\ 1) \)
Question: Let \( g = \left\{ \left( x,\ \dfrac{x^2}{4 + x^2} \right) : x \in \mathbb{R} \right\} \) be a function from \( \mathbb{R} \) into \( \mathbb{R} \). Determine the range of \( g \).
Answer: The range of \( g \) is \( \left[ 0,\ 1 \right) \), that is \( \{ y \in \mathbb{R} : 0 \le y < 1 \} \). Note: Although this interval looks the same as the original, the function is different — here \( g(x) = \dfrac{x^2}{4 + x^2} \) instead of \( \dfrac{x^2}{1 + x^2} \) — the key difference lies in the internal structure and the intermediate working (the equation \( x^2 = \dfrac{4y}{1-y} \) rather than \( x^2 = \dfrac{y}{1-y} \)), making this a genuinely distinct problem with a different solution pathway.