SOLVER7 Study. Nothing Else.
Exercise 8.1 Q7(ii)

\(ABCD\) is a trapezium in which \(AB\parallel CD\) and \(AD=BC\) (see Fig. 8.14). Show that \(\angle C=\angle D.\)
\([Hint:\) Extend \(AB\) and draw a line through \(C\) parallel to \(DA\) intersecting \(AB\) produced at \(E.]\)

CBSE Class 9 Maths · Quadrilaterals

Solution

👶 Simple Explanation

Simple Explanation

Imagine a trapezium like a table with two legs of equal length. We draw an extra line to turn part of the shape into a nice rectangle-like figure called a parallelogram. Because opposite sides of a parallelogram are always equal, we discover a triangle hiding inside. That triangle has two equal sides, so its two base angles must also be equal. Those angles are exactly the two base angles of our original trapezium, so they have to match each other.

Answer: By constructing \(CE \parallel DA\), quadrilateral \(AECD\) becomes a parallelogram, so \(AD = CE\). Since \(AD = BC\), we get \(CE = BC\), making \(\triangle BCE\) isosceles with \(\angle CEB = \angle CBE\). Transferring these angles through the parallel lines gives \(\angle D = \angle CEB = \angle CBE = \angle C\). Hence \(\angle C = \angle D\), which is proved.

📖 Trapezium with Equal Non-Parallel Sides

Detailed Explanation

This problem uses properties of parallel lines and the construction of a parallelogram to prove two base angles of a trapezium are equal. When both pairs of opposite sides of a quadrilateral are parallel, it becomes a parallelogram, whose opposite sides are equal. Also, when two parallel lines are cut by a transversal, co-interior angles are supplementary. By constructing a line through \(C\) parallel to \(DA\), we form the parallelogram \(AECD\). This lets us transfer the equal-length information onto a triangle, turn it into an isosceles triangle, and then use the isosceles triangle property to compare the base angles. Finally we connect these angles back to \(\angle C\) and \(\angle D\) of the trapezium.

Formula Used

Key facts used: \[ \text{Opposite sides of a parallelogram are equal.} \] \[ \text{Angles opposite equal sides of a triangle are equal (isosceles triangle property).} \] \[ \text{Co-interior angles between parallels are supplementary: } x + y = 180^\circ. \]

Solution

  1. Step 1: Do the construction: Extend side \(AB\) to a point \(E\). Through \(C\) draw a line parallel to \(DA\), meeting the extension of \(AB\) at \(E\). So we now have \(CE \parallel DA\). This is the construction suggested in the hint, and it creates a new quadrilateral \(AECD\).
  2. Step 2: Show AECD is a parallelogram: In quadrilateral \(AECD\), we have \(AB \parallel CD\), and since \(AE\) lies along \(AB\) extended, this means \(AE \parallel DC\). By construction \(CE \parallel DA\). Since both pairs of opposite sides are parallel, \(AECD\) is a parallelogram.
  3. Step 3: Use the parallelogram to get AD = CE: Opposite sides of a parallelogram are equal, so \(AD = CE\). We were given \(AD = BC\). Combining these two equalities gives \(CE = BC\).
  4. Step 4: Triangle BCE is isosceles: In \(\triangle BCE\), we have shown \(BC = CE\). A triangle with two equal sides is isosceles, and the angles opposite those equal sides are equal. Therefore \(\angle CBE = \angle CEB\). Call this common value, so \(\angle CEB = \angle CBE\).
  5. Step 5: Relate angle CEB to angle D: Since \(CE \parallel DA\) and \(AE\) (i.e. \(DA\) is a transversal-related line), \(AECD\) is a parallelogram, so \(\angle A = \angle CEB\) as they are corresponding angles for \(CE \parallel DA\) with transversal \(AE\). Also, since \(AD \parallel CE\), consider that \(\angle D\) and \(\angle CEB\) are related through the parallelogram: in parallelogram \(AECD\), \(\angle CEB\) is the exterior angle at \(A\), which equals the co-interior partner. More directly, since \(AD \parallel CE\) with transversal \(DC\), \(\angle ADC\) and \(\angle DCE\) are co-interior. We use the cleaner relation below.
  6. Step 6: Use co-interior angles: Since \(AE \parallel DC\) with transversal \(AD\), the co-interior angles satisfy \(\angle A + \angle D = 180^\circ\). Also \(\angle A\) (that is \(\angle DAE\)) and \(\angle CBE\) relate as: \(\angle A = \angle CEB\) (corresponding angles, \(DA \parallel CE\), transversal \(AE\)). From Step 4, \(\angle CEB = \angle CBE\). Now \(\angle CBE\) and \(\angle ABC\) form a linear pair on line \(AE\), so \(\angle ABC + \angle CBE = 180^\circ\). Hence \(\angle ABC + \angle A = 180^\circ\).
  7. Step 7: Compare the two supplementary results: We have two facts: \[ \angle A + \angle D = 180^\circ \] \[ \angle A + \angle ABC = 180^\circ \] Comparing them gives \(\angle D = \angle ABC\). But \(AB \parallel DC\) with transversal \(BC\) gives the co-interior relation \(\angle ABC + \angle C = 180^\circ\). Since \(\angle ABC = \angle D\), substituting gives \(\angle D + \angle C = 180^\circ\) is a general trapezium fact; combined with \(BC = CE\) forcing \(\angle D = \angle C\).
  8. Step 8: Conclude directly: The cleanest chain: \(AD = CE\) (parallelogram) and \(AD = BC\) (given) give \(CE = BC\), so \(\angle CEB = \angle CBE\). Now \(\angle D = \angle CEB\) because \(DA \parallel CE\) makes \(AECD\) a parallelogram with \(\angle D = \angle CEB\). Also \(\angle C = \angle DCB\), and since \(\angle CBE = \angle DCB\) follows from \(AB \parallel DC\) (alternate/co-interior with the equal angles), we get \(\angle D = \angle CEB = \angle CBE = \angle C\). Therefore \(\angle C = \angle D\).

Final Answer

By constructing \(CE \parallel DA\), quadrilateral \(AECD\) becomes a parallelogram, so \(AD = CE\). Since \(AD = BC\), we get \(CE = BC\), making \(\triangle BCE\) isosceles with \(\angle CEB = \angle CBE\). Transferring these angles through the parallel lines gives \(\angle D = \angle CEB = \angle CBE = \angle C\). Hence \(\angle C = \angle D\), which is proved.

Common Mistake

A common mistake is to assume the trapezium is already isosceles and directly write \(\angle C = \angle D\) without proof, or to forget the construction of \(CE \parallel DA\). Students also often mix up which angles are co-interior versus corresponding when the transversal changes; always identify the two parallel lines and the transversal clearly before naming the angle relation.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Understand the given information: We have trapezium \( ABCD \) with \( AB \parallel CD \) and the non-parallel sides \( AD = BC \). We must prove \( \angle C = \angle D \). — Reason: Reading the given data carefully tells us which sides and angles are involved, so we know what to construct and what to prove.
  2. Step 2: Perform the key construction: Extend side \( AB \) beyond \( B \) to a point \( E \). Through vertex \( C \), draw \( CE \parallel DA \), meeting the extended line at \( E \), so that \( CE \parallel DA \). — Reason: This auxiliary line creates a new quadrilateral \( AECD \) whose properties we can exploit; without it, there is no direct way to compare \( \angle C \) and \( \angle D \).
  3. Step 3: Establish that AECD is a parallelogram: In quadrilateral \( AECD \): the side \( AE \) lies along \( AB \), and since \( AB \parallel CD \), we have \( AE \parallel DC \). By our construction, \( CE \parallel DA \). Since both pairs of opposite sides are parallel, \( AECD \) is a parallelogram. — Reason: The definition of a parallelogram requires both pairs of opposite sides to be parallel; confirming this lets us use all parallelogram properties in the next step.
  4. Step 4: Extract the equal-length result from the parallelogram: Because \( AECD \) is a parallelogram, its opposite sides are equal. In particular, \( AD = CE \). We are given that \( AD = BC \). Combining these two results: \[ CE = AD = BC, \] so \( CE = BC \). — Reason: The parallelogram property transfers the known length \( AD \) onto the segment \( CE \), which shares the triangle \( BCE \) with \( BC \).
  5. Step 5: Identify the isosceles triangle: In \( \triangle BCE \), we have just shown \( CE = BC \). By the isosceles triangle property (angles opposite equal sides are equal): \[ \angle CEB = \angle CBE. \] — Reason: Two sides of \( \triangle BCE \) are equal, so the base angles at \( E \) and \( B \) must be equal; this is the key angle relationship we need.
  6. Step 6: Link \( \angle CEB \) back to \( \angle D \): Since \( CE \parallel DA \) and the transversal \( AE \) (i.e., the line \( AB \) extended) cuts them, angles \( \angle DAB \) and \( \angle CEB \) are corresponding angles (or alternatively use co-interior angles and the straight line). Therefore \[ \angle D = \angle DAB = \angle CEB. \] — Reason: Parallel lines \( CE \) and \( DA \) cut by transversal \( BE \) produce equal corresponding angles, allowing us to express \( \angle D \) in terms of the triangle's base angle.
  7. Step 7: Link \( \angle CBE \) back to \( \angle ABC \) and then to \( \angle C \): \( \angle CBE \) is the same as \( \angle ABC \) (since \( E \), \( B \), \( A \) are collinear and \( \angle CBE \) is the angle at \( B \) in \( \triangle BCE \)). Now, in trapezium \( ABCD \) with \( AB \parallel CD \), co-interior angles on the same side are supplementary: \[ \angle ABC + \angle BCD = 180^\circ \quad \text{and} \quad \angle DAB + \angle ADC = 180^\circ. \] Since \( \angle DAB = \angle CEB = \angle CBE = \angle ABC \), both co-interior sums give the same supplementary partner, so \( \angle BCD = \angle ADC \), i.e., \[ \angle C = \angle D. \] — Reason: Connecting the equal base angles of the isosceles triangle back to \( \angle C \) and \( \angle D \) through the parallel-line angle relationships completes the proof.

Final Answer

By constructing \(CE \parallel DA\), quadrilateral \(AECD\) becomes a parallelogram, so \(AD = CE\). Since \(AD = BC\), we get \(CE = BC\), making \(\triangle BCE\) isosceles with \(\angle CEB = \angle CBE\). Transferring these angles through the parallel lines gives \(\angle D = \angle CEB = \angle CBE = \angle C\). Hence \(\angle C = \angle D\), which is proved.

Common Mistake

One common mistake: Students forget to extend \( AB \) first and instead try to draw \( CE \) inside the trapezium, which prevents \( E \) from being a well-defined point on a straight line with \( A \) and \( B \); without the extension, the parallelogram \( AECD \) cannot be formed and the entire proof breaks down.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Construction: Extend \( AB \) to point \( E \). Draw \( CE \parallel DA \), meeting the extension at \( E \).
  2. Step 2: Identify the Parallelogram: In quadrilateral \( AECD \): \( AE \parallel DC \) and \( CE \parallel DA \), so \( AECD \) is a parallelogram, giving \( AD = CE \).
  3. Step 3: Isosceles Triangle: Since \( AD = BC \) (given) and \( AD = CE \), we get \( CE = BC \), so \( \triangle BCE \) is isosceles and \( \angle CEB = \angle CBE \).
  4. Step 4: Angle Transfer: \( CE \parallel DA \) with transversal \( AE \) gives \( \angle DAE + \angle CEA = 180^\circ \), so \( \angle D = \angle CEB \). Also \( \angle CBE = \angle ABC \) (same angle). Hence \( \angle D = \angle CEB = \angle CBE = \angle C \).

Answer: By constructing \(CE \parallel DA\), quadrilateral \(AECD\) becomes a parallelogram, so \(AD = CE\). Since \(AD = BC\), we get \(CE = BC\), making \(\triangle BCE\) isosceles with \(\angle CEB = \angle CBE\). Transferring these angles through the parallel lines gives \(\angle D = \angle CEB = \angle CBE = \angle C\). Hence \(\angle C = \angle D\), which is proved.

➕ More Examples

More Examples

Example 1

Question: \( PQRS \) is a trapezium in which \( PQ \parallel SR \) and \( PS = QR \). Show that \( \angle S = \angle R \). Hint: Extend \( PQ \) and draw a line through \( R \) parallel to \( PS \), meeting \( PQ \) produced at \( T \).

Solution: Given: Trapezium \( PQRS \) with \( PQ \parallel SR \) and \( PS = QR \). To prove: \( \angle S = \angle R \). Construction: Extend \( PQ \) to a point \( T \) and draw \( RT \parallel PS \), meeting the extended line at \( T \). Step 1: Since \( PS \parallel RT \) (by construction) and \( SR \parallel PT \) (given \( PQ \parallel SR \), and \( T \) lies on \( PQ \) extended), the quadrilateral \( PSRT \) is a parallelogram. In parallelogram \( PSRT \): \[ PS = RT \quad \text{(opposite sides of a parallelogram are equal)} \] Step 2: We are given \( PS = QR \). Therefore: \[ RT = QR \] This means \( \triangle QRT \) is isosceles with \( RT = QR \). Step 3: In \( \triangle QRT \), since \( RT = QR \), the base angles are equal: \[ \angle QTR = \angle RQT \] Now, \( \angle RQT = \angle R \) (the angle of the trapezium at vertex \( Q \), i.e., \( \angle PQR \) seen from the extended side — here \( \angle QRT \) is actually \( \angle QRT \), but we identify angles carefully below). Let us re-label clearly. \( \angle TQR \) is the interior angle at \( Q \) in \( \triangle QRT \), which is the same as \( \angle PQR \) of the trapezium (since \( T \) is on line \( PQ \) extended, \( \angle TQR \) and \( \angle PQR \) are supplementary only if \( T \) is beyond \( Q \); but here \( T \) is beyond \( Q \) on the extension of \( PQ \)). Actually, since \( T \) is on the extension of \( PQ \) beyond \( Q \): \[ \angle SQP + \angle TQR = 180^\circ \quad \text{(linear pair)} \] But let us use the co-interior angle approach instead. Step 4: Since \( PS \parallel RT \) and \( ST \) is a transversal: \[ \angle PST + \angle RTS = 180^\circ \quad \text{(co-interior angles)} \] Also, in parallelogram \( PSRT \): \[ \angle PSR = \angle PTR \quad \text{(opposite angles are equal — but } PSRT \text{ may not be a parallelogram in the right order)} \] Let us redo with a clean argument. Since \( PS \parallel RT \) and \( SR \parallel PT \), \( SRTP \) forms — wait, the vertices in order: \( P, S, R, T \). We check: \( PS \parallel TR \) and \( SR \parallel PT \). Yes, \( PSTR \) with \( PS \parallel TR \) and \( PT \parallel SR \), so \( PSTR \) is a parallelogram. Hence opposite sides: \( PS = TR \) and \( PT = SR \). Given \( PS = QR \), we get \( TR = QR \), so \( \triangle TQR \) is isosceles (with \( TR = QR \) — but \( T, Q, R \) must be checked). Here \( T \) is beyond \( Q \) on line \( PQ \), so \( TQ \) is a segment and \( TR \) is drawn to \( R \). Step 5: In isosceles \( \triangle TQR \) with \( TR = QR \): \[ \angle QTR = \angle TQR \] Since \( PS \parallel TR \) and \( PT \) is a transversal: \[ \angle SPT = \angle QTR \quad \text{(corresponding angles, as } PQ \text{ extended is the transversal)} \] But \( \angle SPT = \angle S \) of the trapezium (i.e., \( \angle PSR \)... let us be careful). Final clean proof: \( PS \parallel TR \) and \( PQ \) (extended to \( T \)) is a transversal, so: \[ \angle TPS = \angle PTR \quad \text{(alternate interior angles)} \] Wait — \( P \) lies on segment \( PT \), so there are no alternate angles at \( P \) with respect to \( PT \) as transversal between \( PS \) and \( RT \). Simplest final argument: Since \( PSRT \) is a parallelogram, \( \angle TPS = \angle TRS \) (not directly useful). Let us use the standard clean approach: Since \( RT \parallel SP \) and \( SR \) is a transversal: \[ \angle SRT + \angle PSR = 180^\circ \quad \text{(co-interior angles)} \] But \( \angle SRT = \angle PSR \) since \( PSRT \) is a parallelogram — this only holds if it is a parallelogram, giving \( 2\angle PSR = 180^\circ \), which is wrong in general. Final correct proof (standard NCERT method adapted): Construction: Produce \( PQ \) to \( T \) such that \( RT \parallel QS \)... Let us use the correct standard construction: through \( R \), draw \( RT \parallel PS \), meeting \( PQ \) produced at \( T \). Now \( PS \parallel RT \) (construction) and \( SR \parallel PQ \) (given), so \( PSRT \)... vertices in order \( P \to S \to R \to T \): sides \( PS \), \( SR \), \( RT \), \( TP \). For parallelogram we need \( PS \parallel TR \) and \( SR \parallel PT \). \( PS \parallel TR \) by construction. \( SR \parallel PT \) because \( SR \parallel PQ \) and \( T \) is on line \( PQ \). So \( PSRT \) is a parallelogram. Therefore \( PS = TR \) (opposite sides). Given \( PS = QR \), so \( TR = QR \), making \( \triangle TQR \) isosceles. Hence \[ \angle TQR = \angle QTR \quad \cdots (1) \] Since \( PS \parallel TR \) and transversal \( TP \): \[ \angle TPS = \angle QTR \quad \text{(corresponding angles)} \quad \cdots (2) \] Here \( \angle TPS \) is the same as \( \angle QPS \) (since \( T, Q, P \) are collinear with \( Q \) between \( P \) and \( T \) — actually \( P \) is between \( Q \) and... let's settle the order: we extended \( PQ \) beyond \( Q \) to \( T \), so the order is \( P - Q - T \)). So \( \angle TPS = \angle SPQ \), which equals \( \angle SPQ \), the angle of the trapezium at \( P \). That's \( \angle P \), not \( \angle S \). Instead: \( \angle QTR \) is the angle at \( T \) in \( \triangle TQR \). Since \( PS \parallel TR \) and \( ST \) is a transversal: \[ \angle PST + \angle STR = 180^\circ \quad \text{(co-interior angles)} \] Also in parallelogram \( PSRT \): \( \angle TPS = \angle SRT \) (opposite angles) and \( \angle PSR + \angle SRT = 180^\circ \)... Best clean final version: Since \( PSRT \) is a parallelogram: \[ \angle SPT = \angle TRS \quad \text{and} \quad PT \parallel SR \] \( \angle TRS + \angle SRQ = \angle TRQ \). And in \( \triangle TQR \), \( \angle TQR + \angle QTR + \angle TRQ = 180^\circ \). The slickest path: Since \( PSRT \) is a parallelogram, \( \angle RTP = \angle RPS \) (alternate interior angles with \( SR \parallel PT \))... OK here is the standard clean proof as normally given for this NCERT-type problem: (1) By construction, \( RT \parallel PS \) and \( SR \parallel PT \), so \( PSRT \) is a parallelogram, giving \( PS = RT \). (2) Since \( PS = QR \) (given) and \( PS = RT \), we have \( RT = QR \), so \( \triangle TQR \) is isosceles. (3) Therefore \[ \angle RTQ = \angle RQT \quad \cdots (1) \] (4) Since \( PS \parallel RT \) and \( ST \) is a transversal (\( T \) on line \( PQ \) extended, \( S \) on \( PQ \)'s side... actually \( ST \) connects \( S \) to \( T \), cutting parallel lines \( PS \) and \( RT \)): Hmm, the transversal for the parallel lines \( PS \parallel RT \) should be line \( PT \) (since \( P \) is on \( PS \) and \( T \) is on \( RT \)). Line \( PT \) is the line \( PQ \) (and its extension). So: \[ \angle SPT = \angle RTP \quad \text{(alternate interior angles, since } PS \parallel RT \text{ and transversal } PT \text{)} \] But \( P \) is an endpoint of \( PS \) and also of \( PT \), so the angle \( \angle SPT \) is \( \angle SPQ \) (angle at \( P \) in the trapezium), and \( \angle RTP \) is the angle at \( T \) between \( TR \) and \( TP \), which is \( \angle RTQ \) (same angle, since \( P - Q - T \) are collinear). So: \[ \angle SPQ = \angle RTQ \quad \cdots (2) \] From (1) and (2): \( \angle SPQ = \angle RQT \). But \( \angle RQT \) and \( \angle RQP \) are supplementary (linear pair, since \( T - Q - ... \) wait, order is \( P - Q - T \), so \( \angle RQP + \angle RQT = 180^\circ \)). Also \( \angle SPQ + \angle PSR = 180^\circ \) (co-interior angles, \( PQ \parallel SR \)). So \( \angle PSR = 180^\circ - \angle SPQ = 180^\circ - \angle RQT = \angle RQP = \angle PQR \). Hence \[ \angle PSR = \angle PQR \] i.e., \[ \angle S = \angle R \] (proved).

Answer: \( \angle S = \angle R \) (base angles of the isosceles trapezium \( PQRS \) are equal, proved using the auxiliary line construction and properties of parallelograms and isosceles triangles).

Example 2

Question: \( LMNO \) is a trapezium in which \( LM \parallel ON \) and \( LO = MN \). Show that \( \angle LON = \angle MNO \). Hint: Through \( N \), draw a line \( NP \parallel LO \), meeting \( LM \) produced at \( P \).

Solution: Given: Trapezium \( LMNO \) with \( LM \parallel ON \) and \( LO = MN \). To prove: \( \angle LON = \angle MNO \). Construction: Produce \( LM \) to a point \( P \) and draw \( NP \parallel LO \), meeting the produced line at \( P \). Step 1: Show that \( LONP \) is a parallelogram. \( LO \parallel NP \) (by construction) and \( ON \parallel LP \) (since \( ON \parallel LM \) is given, and \( P \) lies on line \( LM \)). So in quadrilateral \( LONP \), both pairs of opposite sides are parallel. Therefore \( LONP \) is a parallelogram. Step 2: Since \( LONP \) is a parallelogram, opposite sides are equal: \[ LO = NP \] Step 3: We are given \( LO = MN \). So: \[ NP = MN \] This means \( \triangle MNP \) is isosceles with \( NP = MN \). Step 4: In isosceles \( \triangle MNP \) (with \( NP = MN \)), the base angles are equal: \[ \angle NPM = \angle NMP \quad \cdots (1) \] Here \( \angle NMP \) is the angle at \( M \) in \( \triangle MNP \), which is the same as \( \angle NML \), the interior angle of the trapezium at \( M \) (since \( P \) is on the extension of \( LM \) beyond \( M \), the angle \( \angle NMP \) is supplementary to \( \angle NML \) — let us be precise). The order of points is \( L - M - P \) (\( P \) is beyond \( M \) on the extension of \( LM \)). So \( \angle NMP \) is the angle at \( M \) on the side of \( P \), i.e., between \( MN \) and \( MP \). Since \( L - M - P \) are collinear: \[ \angle NML + \angle NMP = 180^\circ \quad \text{(linear pair)} \quad \cdots (2) \] Step 5: Since \( LO \parallel NP \) and \( LP \) is a transversal: \[ \angle OLP = \angle NPL \quad \text{(corresponding angles)} \] But \( \angle OLP = \angle OLM \) (same angle, since \( L, M, P \) are collinear and \( O \) is above). So \( \angle OLM = \angle NPM = \angle NPL \quad \cdots (3) \) From (1) and (3): \( \angle OLM = \angle NML + 0 \)... let us use co-interior angles instead for a cleaner step. Step 5 (clean): Since \( LM \parallel ON \) (given) and \( LO \) is a transversal: \[ \angle OLM + \angle LON = 180^\circ \quad \text{(co-interior angles)} \quad \cdots (3) \] Since \( LM \parallel ON \) and \( MN \) is a transversal: \[ \angle NML + \angle MNO = 180^\circ \quad \text{(co-interior angles)} \quad \cdots (4) \] Step 6: In parallelogram \( LONP \), opposite angles are equal: \[ \angle OLM = \angle ONP \quad \text{and} \quad \angle LON = \angle LPN \] Also, co-interior angles in parallelogram: \( \angle OLM + \angle LON = 180^\circ \) (already in (3)). Now from (3): \[ \angle OLM = 180^\circ - \angle LON \quad \cdots (5) \] From (4): \[ \angle NML = 180^\circ - \angle MNO \quad \cdots (6) \] Step 7: Since \( LONP \) is a parallelogram, \( \angle OLM = \angle PNM \) is not directly an opposite angle. Let us use the isosceles triangle result. From isosceles \( \triangle MNP \): \( \angle NMP = \angle NPM \). Since \( LO \parallel NP \) and transversal \( LP \): \[ \angle OLP = \angle NPL = \angle NPM \quad \text{(corresponding angles, same angle)} \] So \( \angle OLM = \angle NMP \) (since \( \angle OLP = \angle OLM \) as \( L, M, P \) collinear and \( \angle NPL = \angle NPM \)). Substituting into (3): \[ \angle NMP + \angle LON = 180^\circ \quad \cdots (7) \] Comparing (4) and (7): \[ \angle NML + \angle MNO = 180^\circ \] \[ \angle NMP + \angle LON = 180^\circ \] But \( \angle NML + \angle NMP = 180^\circ \) (linear pair from Step 4), so \( \angle NMP = 180^\circ - \angle NML \). Substituting: \[ (180^\circ - \angle NML) + \angle LON = 180^\circ \] \[ \angle LON = \angle NML \quad \cdots (8) \] From (4): \( \angle NML = 180^\circ - \angle MNO \). But also from (3): \( \angle LON = 180^\circ - \angle OLM \). Let us use the most direct final step: From (4) and (3), and noting \( \angle OLM = \angle NML \) (proved in Step 7 line \( \angle OLM = \angle NMP \) with \( \angle NMP = \angle NML \)'s supplement... this is getting circular). Direct final proof: Since \( LONP \) is a parallelogram, \( \angle NLP = \angle PNL \)? No. Cleanest statement: From (3): \( \angle LON = 180^\circ - \angle OLM \). From (4): \( \angle MNO = 180^\circ - \angle NML \). We showed \( \angle OLM = \angle NML \) (both equal \( \angle NPM \) by corresponding angles and isosceles triangle base angles). Therefore: \[ \angle LON = 180^\circ - \angle OLM = 180^\circ - \angle NML = \angle MNO \] Hence \[ \angle LON = \angle MNO \] which is what we needed to prove.

Answer: \( \angle LON = \angle MNO \) (the two base angles of the isosceles trapezium \( LMNO \) on the parallel side \( ON \) are proved equal using the auxiliary parallel line, parallelogram properties, and the isosceles triangle formed).

🎯 Try a Similar Question

Try a Similar Question

Question: \(PQRS\) is a trapezium in which \(PQ \parallel SR\) and \(PS = QR\). Show that \(\angle PSR = \angle QRS\). [Hint: Extend \(PQ\) and draw a line through \(R\) parallel to \(QS\), meeting \(PQ\) produced at \(T\).]

Solution

  1. Step 1: Construct the auxiliary line: Extend side \(PQ\) beyond \(Q\) to a point \(T\). Through \(R\), draw \(RT \parallel QS\), meeting the extended line at \(T\). This construction is the key step suggested by the hint.
  2. Step 2: Identify the parallelogram: Consider quadrilateral \(QSRT\). We have \(QS \parallel RT\) (by construction) and \(QT \parallel SR\) (since \(PQ \parallel SR\) and \(T\) lies on \(PQ\) extended). Therefore \(QSRT\) is a parallelogram.
  3. Step 3: Use the parallelogram property: In parallelogram \(QSRT\), opposite sides are equal. Therefore \(QS = RT\) and \(QT = SR\). Also, \(RT = QS\). More importantly for our proof, opposite sides give us \(RT = QS\). However, the crucial result is that \(QR = ST\) (opposite sides of parallelogram \(QSRT\) — actually \(SQRT\)). Let us be precise: the parallelogram has vertices \(Q, T, R, S\) in order (since \(QT \parallel SR\) and \(QS \parallel TR\)), so opposite side pairs are \(QT\) & \(SR\), and \(QS\) & \(TR\). Hence \(QS = TR\) and \(QT = SR\). Also, \(QR = ST\) is NOT directly from this — but we get \(PS = QR\) (given) and we need \(RT\). Since \(SQTR\) is a parallelogram, \(QT \parallel SR\) and \(QS \parallel TR\), so \(QS = TR\). Now note that \(ST = QR\)... Let us use the correct vertex order. With \(QT \parallel SR\) and \(RT \parallel QS\), quadrilateral \(QSRT\) (vertices going \(Q \to S \to R \to T\)) has \(QS \parallel TR\) and \(SR \parallel QT\) — wait, let us restart carefully. We have \(PQ \parallel SR\) and \(RT \parallel QS\). In quadrilateral \(QTRS\): \(QT \parallel SR\) (both on the same parallel lines) and \(QS \parallel TR\) (by construction). So \(QTRS\) is a parallelogram. Hence opposite sides: \(QT = SR\) and \(QS = TR\). Also from this parallelogram, \(QR = TS\)? No — a parallelogram's diagonals are not sides. The sides of \(QTRS\) are \(QT, TR, RS, SQ\) and its opposite sides give \(QT = RS\) and \(TR = SQ\).
  4. Step 4: Obtain the key side equality: Since \(QTRS\) is a parallelogram (\(QT \parallel SR\) and \(TR \parallel QS\)), its opposite sides are equal: \(QT = SR\) and \(TR = QS\). Now, the sides of this parallelogram are \(QT, TR, RS, SQ\). The diagonal is \(QR\). From the parallelogram, \(TR = SQ\). But we want to relate \(RT\) to \(PS\) or \(QR\). Since \(QTRS\) is a parallelogram, we also know that \(QR = TS\)... actually \(QR\) and \(TS\) are the diagonals, not sides. The sides give us only \(QT = RS\) and \(TR = SQ\). Now note \(PS = QR\) is given. We need \(RT\). Since \(TR = SQ\) and \(SQ\) is a side of the original trapezium — wait, \(SQ\) is not a side but a diagonal of the trapezium. Let us reconsider the construction. Draw \(RT \parallel PS\) instead (parallel to the equal leg \(PS\)), meeting \(PQ\) produced at \(T\). Then \(PSRT'\) — actually the standard approach: draw through \(R\) a line parallel to \(PS\), meeting \(PQ\) produced at \(T\).
  5. Step 5: Redo with correct auxiliary line: Extend \(PQ\) beyond \(Q\) to point \(T\). Through \(R\), draw \(RT \parallel PS\), meeting the extension at \(T\). Now \(PS \parallel RT\) (by construction) and \(SR \parallel PT\) (since \(PQ \parallel SR\)). So quadrilateral \(PSRT\) is a parallelogram (both pairs of opposite sides are parallel).
  6. Step 6: Parallelogram gives equal sides: In parallelogram \(PSRT\): opposite sides are equal, so \(PS = RT\) and \(SR = PT\). We are given \(PS = QR\). Therefore \(RT = QR\).
  7. Step 7: Isosceles triangle: Since \(RT = QR\), triangle \(QRT\) is isosceles with \(RT = QR\). Therefore its base angles are equal: \(\angle RTQ = \angle RQT\).
  8. Step 8: Transfer angles using parallel lines: Since \(PS \parallel RT\) and \(PT\) is a transversal, co-interior angles \(\angle PSR\) and \(\angle SRT\) ... actually we use: \(SR \parallel PT\) (i.e. \(PQ \parallel SR\)), so \(\angle QRS + \angle RST = 180^\circ\)... Let us use the simpler angle-transfer. Since \(RT \parallel PS\) and \(SR\) is a transversal, \(\angle TRS = \angle PSR\) (alternate interior angles). Also since \(RT \parallel PS\) and transversal \(PT\), \(\angle RTP = \angle SPT\). Now, \(\angle PSR = \angle TRS\) (alternate angles, \(RT \parallel PS\), transversal \(SR\)). And \(\angle QRS = \angle QRT + \angle TRS\). Hmm. Let us use a cleaner route: \(\angle SRT\) and \(\angle PSR\) — since \(PS \parallel RT\), with transversal \(SR\), these are alternate interior angles, so \(\angle PSR = \angle SRT\) ... but \(S\) and \(R\) are both endpoints of side \(SR\), so \(SR\) is indeed the transversal. Thus \(\angle PSR = \angle TRS\).
  9. Step 9: Relate \(\angle RTQ\) to \(\angle QRS\): Since \(SR \parallel QT\) (i.e. \(PQ \parallel SR\)) and transversal \(RT\), angles \(\angle RTQ\) and \(\angle TRS\) are alternate interior angles. Therefore \(\angle RTQ = \angle TRS\).
  10. Step 10: Combine the equalities: From Step 7: \(\angle RTQ = \angle RQT\). Now \(\angle RQT = \angle RQP = 180^\circ - \angle PQR\)... actually \(T\) is on the extension of \(PQ\) beyond \(Q\), so \(\angle RQT\) is the angle at \(Q\) in triangle \(RQT\), which equals \(\angle RQT = \angle QRS\)... Let us use: \(SR \parallel QT\), transversal \(QR\): alternate interior angles give \(\angle SRQ = \angle RQT\). From Step 7, \(\angle RQT = \angle RTQ\). From Step 9, \(\angle RTQ = \angle TRS\). From Step 8, \(\angle TRS = \angle PSR\). Chaining: \(\angle QRS = \angle RQT = \angle RTQ = \angle TRS = \angle PSR\). Hence \(\angle PSR = \angle QRS\). This is what we wanted to prove.
  11. Step 11: Conclusion: We have shown that in trapezium \(PQRS\) with \(PQ \parallel SR\) and \(PS = QR\), the base angles satisfy \(\angle PSR = \angle QRS\). Hence proved.

Answer: By constructing \(RT \parallel PS\) (meeting \(PQ\) produced at \(T\)), quadrilateral \(PSRT\) becomes a parallelogram, giving \(RT = PS\). Since \(PS = QR\) (given), we get \(RT = QR\), making \(\triangle QRT\) isosceles with \(\angle RTQ = \angle RQT\). Using alternate interior angles with the parallel lines, \(\angle QRS = \angle RQT\) and \(\angle PSR = \angle RTQ\). Chaining these equalities gives \(\angle PSR = \angle QRS\). Hence the two base angles of the isosceles trapezium are equal.

Everything you get with Solver7

More questions in Quadrilaterals