SOLVER7 Study. Nothing Else.
Figure It Out 3 Q6

Construct a square with diagonal \(6\ cm\) without using a protractor.

CBSE Class 8 Maths · Quadrilaterals

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing a big letter X on paper. Both lines of the X are the same length, cross exactly in the middle, and form a perfect right-angle corner. That is exactly how the diagonals of a square behave! We draw one diagonal line of \( 6\ cm \), find its exact centre, then draw a second line through that centre going straight across at a right angle. Each half-line measures \( 3\ cm \). The four tips of those two lines become the four corners of the square.

Answer: The required square \( ABCD \) with diagonal \( 6\ cm \) is obtained by drawing \( \overline{AC} = 6\ cm \), constructing its perpendicular bisector through midpoint \( O \), marking \( B \) and \( D \) at \( 3\ cm \) on each side of \( O \), and joining \( A, B, C, D \). Each side of the square measures about \( 4.2\ cm \).

📖 Constructing a Square with a Given Diagonal

Detailed Explanation

A square is a special quadrilateral in which all four sides are equal and all four angles are \( 90^\circ \). A very useful property of a square is that its two diagonals are equal in length, they bisect each other, and they meet at right angles, that is, they are perpendicular to each other. So if we are given the diagonal, we can use this property. We draw one diagonal, find its midpoint, and then draw the second diagonal through that midpoint perpendicular to the first, with equal halves on both sides. The four endpoints of the two diagonals become the four vertices of the square. Because we use a perpendicular bisector for the right angle, we do not need a protractor at all.

Formula Used

Key properties used: the diagonals of a square are equal, they bisect each other, and they are perpendicular. Here diagonal \( AC = BD = 6\ cm \), and they meet at their common midpoint \( O \) so that \( OA = OC = OB = OD = 3\ cm \).

Solution

  1. Step 1: Draw the first diagonal. Using a ruler, draw a line segment \( \overline{AC} = 6\ cm \). This is one diagonal of the square.
  2. Step 2: Construct the perpendicular bisector of \( \overline{AC} \). Open the compass to a little more than half of \( AC \) (more than \( 3\ cm \)). With centre \( A \), draw arcs above and below the segment. With the same radius and centre \( C \), draw two more arcs cutting the earlier ones. Join the two intersection points with a straight line.
  3. Step 3: Mark the centre \( O \). The perpendicular bisector cuts \( \overline{AC} \) at its midpoint \( O \). This line is perpendicular to \( AC \), which gives the needed right angle without a protractor. Here \( OA = OC = 3\ cm \).
  4. Step 4: Locate the other two vertices. The second diagonal \( BD \) must also be \( 6\ cm \) and must be bisected by \( O \). So set the compass to \( 3\ cm \). With centre \( O \), cut the perpendicular line on both sides of \( AC \), marking points \( B \) and \( D \). Now \( OB = OD = 3\ cm \).
  5. Step 5: Complete the square. Join the four points in order: \( \overline{AB} \), \( \overline{BC} \), \( \overline{CD} \) and \( \overline{DA} \). Since both diagonals are equal (\( 6\ cm \)), bisect each other, and meet at \( 90^\circ \), the figure \( ABCD \) is a square.
  6. Step 6: Verify. Measure the four sides with a ruler; each should be about \( 4.2\ cm \). This matches the side of a square whose diagonal is \( 6\ cm \), because for a square, side \( = \frac{\text{diagonal}}{\sqrt{2}} = \frac{6}{\sqrt{2}} \approx 4.2\ cm \).

Final Answer

The required square \( ABCD \) with diagonal \( 6\ cm \) is obtained by drawing \( \overline{AC} = 6\ cm \), constructing its perpendicular bisector through midpoint \( O \), marking \( B \) and \( D \) at \( 3\ cm \) on each side of \( O \), and joining \( A, B, C, D \). Each side of the square measures about \( 4.2\ cm \).

Common Mistake

A common mistake is drawing the second diagonal perpendicular but not through the midpoint, or taking its half-length not equal to \( 3\ cm \). If the diagonals do not bisect each other equally and at \( 90^\circ \), the figure becomes a rectangle or a rhombus, not a square.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw the first diagonal: Using a ruler, draw a line segment \( \overline{AC} \) of length \( 6\ cm \). Label the endpoints \( A \) and \( C \). — Reason: This segment is one full diagonal of the square; every other vertex will be located relative to it.
  2. Step 2: Set up the compass for the perpendicular bisector: Open your compass to a radius slightly greater than half of \( AC \), i.e., slightly more than \( 3\ cm \). — Reason: The radius must exceed half the segment length so that the arcs drawn from both ends actually intersect above and below the segment, giving two crossing points.
  3. Step 3: Draw intersecting arcs from both ends: Keeping the compass at the same radius, place its point on \( A \) and draw arcs both above and below \( \overline{AC} \). Without changing the radius, place the compass point on \( C \) and draw two more arcs that cut across the first pair. — Reason: The two pairs of arcs intersect at points that are equidistant from both \( A \) and \( C \), which is exactly the definition of the perpendicular bisector.
  4. Step 4: Draw the perpendicular bisector and locate midpoint O: Join the two arc-intersection points with a straight line. This line is the perpendicular bisector of \( \overline{AC} \). Mark the point where this bisector crosses \( \overline{AC} \) as \( O \). Verify with a ruler that \( OA = OC = 3\ cm \). — Reason: Point \( O \) is the centre of the square; it is the common midpoint of both diagonals, and the bisector already guarantees the \( 90^\circ \) angle we need between the two diagonals.
  5. Step 5: Mark vertices B and D on the bisector: Along the perpendicular bisector, measure \( 3\ cm \) from \( O \) on one side and mark that point \( B \). Measure \( 3\ cm \) from \( O \) on the opposite side and mark that point \( D \). — Reason: Since \( BD \) must also be \( 6\ cm \) and \( O \) must bisect it, each half \( OB = OD = 3\ cm \). Placing \( B \) and \( D \) on the perpendicular bisector automatically makes \( BD \perp AC \).
  6. Step 6: Join the four vertices: Using a ruler, draw segments \( \overline{AB} \), \( \overline{BC} \), \( \overline{CD} \), and \( \overline{DA} \) in order. — Reason: Connecting consecutive vertices of the two diagonals completes the quadrilateral. Because the diagonals are equal, bisect each other, and are perpendicular, the resulting shape is guaranteed to be a square.
  7. Step 7: Verify the side length: In right triangle \( \triangle AOB \), the two legs are \( OA = 3\ cm \) and \( OB = 3\ cm \). Applying the Pythagoras theorem: \[ AB^2 = OA^2 + OB^2 = 3^2 + 3^2 = 9 + 9 = 18 \] Therefore \( AB = \sqrt{18} \approx 4.2\ cm \). — Reason: Checking the side length confirms the construction is correct; all four sides will be equal to approximately \( 4.2\ cm \) because all four right triangles formed at \( O \) are congruent.

Final Answer

The required square \( ABCD \) with diagonal \( 6\ cm \) is obtained by drawing \( \overline{AC} = 6\ cm \), constructing its perpendicular bisector through midpoint \( O \), marking \( B \) and \( D \) at \( 3\ cm \) on each side of \( O \), and joining \( A, B, C, D \). Each side of the square measures about \( 4.2\ cm \).

Common Mistake

One common mistake: students sometimes set the compass to exactly \( 3\ cm \) (half the diagonal) when constructing the perpendicular bisector. If the radius equals exactly half the segment, the arcs from \( A \) and \( C \) only just touch at the midpoint itself and do not form two distinct crossing points, making it impossible to draw the bisector line. Always use a radius a little more than \( 3\ cm \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw \( \overline{AC} = 6\ cm \) (first diagonal).
  2. Step 2: Construct the perpendicular bisector of \( \overline{AC} \); label the midpoint \( O \).
  3. Step 3: On the perpendicular bisector, mark \( B \) and \( D \) such that \( OB = OD = 3\ cm \).
  4. Step 4: Join \( A \to B \to C \to D \to A \); each side \( \approx 4.2\ cm \).

Answer: The required square \( ABCD \) with diagonal \( 6\ cm \) is obtained by drawing \( \overline{AC} = 6\ cm \), constructing its perpendicular bisector through midpoint \( O \), marking \( B \) and \( D \) at \( 3\ cm \) on each side of \( O \), and joining \( A, B, C, D \). Each side of the square measures about \( 4.2\ cm \).

➕ More Examples

More Examples

Example 1

Question: Construct a square whose diagonal is 8 cm, without using a protractor. Also find the length of each side of the square (correct to two decimal places).

Solution: Construction steps: 1. Draw a line segment \( \overline{AC} \) of length 8 cm using a ruler. This is the first diagonal. 2. With A as centre and radius greater than \( \frac{8}{2} = 4 \) cm (say 5 cm), draw arcs above and below \( \overline{AC} \). With C as centre and the same radius, draw arcs cutting the previous arcs at points P and Q. 3. Join P and Q. The line PQ is the perpendicular bisector of \( \overline{AC} \) and meets \( \overline{AC} \) at its midpoint O. 4. With O as centre and radius \( \frac{8}{2} = 4 \) cm, mark points B and D on the perpendicular bisector on either side of O, so that \( OB = OD = 4 \) cm. 5. Join A to B, B to C, C to D and D to A. The quadrilateral ABCD is the required square with diagonal 8 cm. Calculation of side length: Using the Baudhayana–Pythagoras theorem in triangle ABC, where \( \angle ABC = 90^\circ \) and both diagonals equal 8 cm: Half of each diagonal \( = \frac{8}{2} = 4 \) cm. Since the diagonals of a square bisect each other at right angles, consider the right triangle formed by two half-diagonals as legs: \[ s^2 = 4^2 + 4^2 \] \[ s^2 = 16 + 16 = 32 \] \[ s = \sqrt{32} = 4\sqrt{2} \approx 4 \times 1.414 = 5.66 \text{ cm} \]

Answer: The square with diagonal 8 cm is constructed. Each side of the square \( = 4\sqrt{2} \approx 5.66 \) cm.

Example 2

Question: Construct a square whose diagonal is 10 cm, without using a protractor. What is the perimeter of the square so constructed? (Use \( \sqrt{2} \approx 1.414 \).)

Solution: Construction steps: 1. Draw a line segment \( \overline{PR} \) of length 10 cm. This is the first diagonal. 2. With P as centre and radius greater than \( \frac{10}{2} = 5 \) cm (say 6 cm), draw arcs above and below \( \overline{PR} \). With R as centre and the same radius, draw intersecting arcs at points X and Y. 3. Join X and Y. The line XY is the perpendicular bisector of \( \overline{PR} \) and intersects \( \overline{PR} \) at its midpoint O. 4. With O as centre and radius \( \frac{10}{2} = 5 \) cm, mark points Q and S on line XY on either side of O, so that \( OQ = OS = 5 \) cm. 5. Join P to Q, Q to R, R to S and S to P. The figure PQRS is the required square with diagonal 10 cm. Calculation of side length and perimeter: Each half-diagonal \( = \frac{10}{2} = 5 \) cm. Using the Baudhayana–Pythagoras theorem with the two half-diagonals as legs of a right triangle: \[ s^2 = 5^2 + 5^2 \] \[ s^2 = 25 + 25 = 50 \] \[ s = \sqrt{50} = 5\sqrt{2} \] Approximating: \[ s \approx 5 \times 1.414 = 7.07 \text{ cm} \] Perimeter of the square: \[ P = 4s = 4 \times 5\sqrt{2} = 20\sqrt{2} \] \[ P \approx 20 \times 1.414 = 28.28 \text{ cm} \]

Answer: The square with diagonal 10 cm is constructed. Each side \( = 5\sqrt{2} \approx 7.07 \) cm, and the perimeter \( = 20\sqrt{2} \approx 28.28 \) cm.

🎯 Try a Similar Question

Try a Similar Question

Question: Construct a square \( PQRS \) whose diagonal is \( 8\ \text{cm} \), without using a protractor. Measure and write the length of each side of the square.

Solution

  1. Step 1 — Draw one diagonal: Draw a line segment \( \overline{PR} = 8\ \text{cm} \) using a ruler. This is one diagonal of the square.
  2. Step 2 — Find the midpoint by constructing a perpendicular bisector: With compass width more than half of 8 cm (say 5 cm), place the compass at P and draw arcs above and below the segment. Without changing the compass width, place it at R and draw arcs that intersect the previous arcs at two points. Join these two intersection points with a straight line. This line is the perpendicular bisector of \( \overline{PR} \) and meets \( \overline{PR} \) at midpoint O. By construction, \( \overline{PO} = \overline{OR} = 4\ \text{cm} \) and the bisector is perpendicular to \( \overline{PR} \), i.e., the angle at O is \( 90^\circ \).
  3. Step 3 — Mark the other two vertices: The second diagonal \( \overline{QS} \) also equals 8 cm and bisects \( \overline{PR} \) at O. So Q and S lie on the perpendicular bisector at a distance of 4 cm from O. Set the compass to 4 cm, place it at O, and mark point Q on one side of \( \overline{PR} \) and point S on the other side along the perpendicular bisector.
  4. Step 4 — Complete the square: Join \( P \) to \( Q \), \( Q \) to \( R \), \( R \) to \( S \), and \( S \) to \( P \) in order. Quadrilateral \( PQRS \) is the required square.
  5. Step 5 — Calculate the side length: Using the Baudhayana–Pythagoras theorem in triangle \( POQ \), where \( \overline{PO} = 4\ \text{cm} \), \( \overline{OQ} = 4\ \text{cm} \), and \( \angle POQ = 90^\circ \): \[ PQ^2 = PO^2 + OQ^2 = 4^2 + 4^2 = 16 + 16 = 32 \] Therefore \[ PQ = \sqrt{32} = 4\sqrt{2} \approx 5.66\ \text{cm} \]

Answer: The required square \( PQRS \) with diagonal \( 8\ \text{cm} \) is obtained by drawing \( \overline{PR} = 8\ \text{cm} \), constructing its perpendicular bisector through midpoint O, and marking Q and S at \( 4\ \text{cm} \) on each side of O, then joining P, Q, R, S. Each side of the square measures \( 4\sqrt{2} \approx 5.66\ \text{cm} \).

Everything you get with Solver7

More questions in Quadrilaterals