Detailed Explanation
When a pilot looks down from the plane towards a point on the ground, the angle between the horizontal line (from the pilot's eye) and the line of sight going down to the point is called the angle of depression. In this problem, the plane travels along its line of sight (a slanted path) from its starting position down to the ground. That slanted path becomes the hypotenuse of a right-angled triangle, where the vertical side is the height of the plane and the angle at the ground equals the angle of depression (alternate angles). Since we know the plane's speed and the time it takes to reach the ground, we can find the slant distance travelled. Then, using \( \sin \) of the angle, we can find the height.
Formula Used
Distance = Speed \(\times\) Time, and \( \sin \theta = \dfrac{\text{Opposite side (height)}}{\text{Hypotenuse (slant distance)}} \)
Solution
- Step 1: Convert the speed into consistent units. Speed = 200 km/hr. Converting to km/second: \[ 200 \text{ km/hr} = \dfrac{200}{3600} \text{ km/sec} = \dfrac{1}{18} \text{ km/sec} \]
- Step 2: Find the slant distance covered by the plane in 54 seconds. This slant distance is the hypotenuse of our right triangle. \[ \text{Distance} = \text{Speed} \times \text{Time} = \dfrac{1}{18} \times 54 = 3 \text{ km} \]
- Step 3: Set up the trigonometric ratio. Let \( h \) be the height of the plane when it started landing. The angle of depression is \( 20^\circ \), and by alternate interior angles, the angle at the ground in the right triangle is also \( 20^\circ \). So: \[ \sin 20^\circ = \dfrac{h}{3} \]
- Step 4: Substitute the given value \( \sin 20^\circ = 0.342 \) and solve for \( h \): \[ 0.342 = \dfrac{h}{3} \] \[ h = 3 \times 0.342 = 1.026 \text{ km} \]
- Step 5: Convert the height into metres for a clearer answer: \[ h = 1.026 \times 1000 = 1026 \text{ m} \]
Final Answer
The height of the plane when it started landing was \( 1.026 \) km (or \( 1026 \) metres).
Common Mistake
A very common mistake is forgetting to convert the speed from km/hr to km/sec (or forgetting to convert the time from seconds to hours). This causes the slant distance to be wrong, and every step after that becomes incorrect. Always make sure the units of speed and time match before multiplying.