SOLVER7 Study. Nothing Else.
Practice Set 7.2 Q1 (ii)

Given below are some triangles and lengths of line segments. Identify in which figures, ray \(PM\) is the bisector of \(\angle QPR.\)

MAH STATE BOARD Mah SB Class 10 Maths · Similarity

Solution

👶 Simple Explanation

Simple Explanation

Imagine a line from a corner of a triangle trying to cut the corner angle into two equal halves. To check if it really does that, we compare two simple ratios. One ratio comes from how the line splits the opposite side. The other ratio comes from the two sides of the triangle at that corner. If both ratios match, the angle is cut equally. Here the two ratios are \( \dfrac{3}{4} \) and \( \dfrac{7}{10} \), which are not equal, so the angle is not split equally.

Answer: Ray PM is NOT the bisector of \( \angle QPR \), because \( \dfrac{RM}{MQ} = \dfrac{3}{4} \) while \( \dfrac{PR}{PQ} = \dfrac{7}{10} \), and these ratios are unequal.

📖 Checking if PM bisects angle QPR

Detailed Explanation

The Angle Bisector Property (converse) states that if a ray from a vertex of a triangle divides the opposite side in the same ratio as the two adjacent sides of the triangle, then that ray is the bisector of the vertex angle. Here, ray PM meets side RQ at point M. So we need to check whether M divides RQ in the same ratio as the sides PR and PQ that meet at vertex P. If \( \dfrac{RM}{MQ} = \dfrac{PR}{PQ} \), then PM bisects angle QPR; otherwise, it does not.

Formula Used

Ray PM bisects \( \angle QPR \) if and only if \( \dfrac{RM}{MQ} = \dfrac{PR}{PQ} \).

Solution

  1. Step 1: Note the given lengths from the figure: From Fig. 1.34, we read: RM = 6, MQ = 8, PR = 7, PQ = 10, and M lies on segment RQ.
  2. Step 2: Compute the ratio in which M divides RQ: \[ \dfrac{RM}{MQ} = \dfrac{6}{8} = \dfrac{3}{4} \]
  3. Step 3: Compute the ratio of the adjacent sides at P: \[ \dfrac{PR}{PQ} = \dfrac{7}{10} \]
  4. Step 4: Compare the two ratios: We compare \( \dfrac{3}{4} \) and \( \dfrac{7}{10} \). Converting to a common denominator: \[ \dfrac{3}{4} = \dfrac{15}{20}, \quad \dfrac{7}{10} = \dfrac{14}{20} \] Since \( \dfrac{15}{20} \ne \dfrac{14}{20} \), we get \( \dfrac{RM}{MQ} \ne \dfrac{PR}{PQ} \).
  5. Step 5: Conclude: Because the two ratios are not equal, by the converse of the angle bisector property, ray PM does NOT bisect \( \angle QPR \).

Final Answer

Ray PM is NOT the bisector of \( \angle QPR \), because \( \dfrac{RM}{MQ} = \dfrac{3}{4} \) while \( \dfrac{PR}{PQ} = \dfrac{7}{10} \), and these ratios are unequal.

Common Mistake

A common mistake is to pair the sides with the wrong segments, for example checking \( \dfrac{RM}{MQ} = \dfrac{PQ}{PR} \). Always match RM with the side PR (both touch R) and MQ with the side PQ (both touch Q).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Read the given measurements from the figure: RM = 6, MQ = 8, PR = 7, PQ = 10, and M is a point on side RQ. — Reason: We must identify all the lengths needed before we can apply the angle bisector condition.
  2. Step 2: Find the ratio in which M divides segment RQ: \[ \dfrac{RM}{MQ} = \dfrac{6}{8} = \dfrac{3}{4} \] — Reason: The converse of the Angle Bisector Theorem requires us to know how M splits the opposite side RQ.
  3. Step 3: Find the ratio of the two sides that meet at vertex P: \[ \dfrac{PR}{PQ} = \dfrac{7}{10} \] — Reason: This is the side ratio that the bisector condition demands must equal \( \dfrac{RM}{MQ} \).
  4. Step 4: Compare the two ratios by converting them to a common denominator of 20: \[ \dfrac{3}{4} = \dfrac{15}{20} \] and \[ \dfrac{7}{10} = \dfrac{14}{20} \] Since \( \dfrac{15}{20} \ne \dfrac{14}{20} \), we conclude \( \dfrac{RM}{MQ} \ne \dfrac{PR}{PQ} \). — Reason: Converting to the same denominator lets us compare the numerators directly and check for equality.
  5. Step 5: Apply the converse of the Angle Bisector Theorem: because \( \dfrac{RM}{MQ} \ne \dfrac{PR}{PQ} \), the required condition is NOT satisfied. — Reason: The theorem's converse guarantees that ray PM bisects \( \angle QPR \) only when the two ratios are equal; since they differ, PM is not the bisector.

Final Answer

Ray PM is NOT the bisector of \( \angle QPR \), because \( \dfrac{RM}{MQ} = \dfrac{3}{4} \) while \( \dfrac{PR}{PQ} = \dfrac{7}{10} \), and these ratios are unequal.

Common Mistake

One common mistake: students sometimes write the ratio as \( \dfrac{MQ}{RM} \) instead of \( \dfrac{RM}{MQ} \), or \( \dfrac{PQ}{PR} \) instead of \( \dfrac{PR}{PQ} \), flipping one ratio but not the other — this gives the wrong comparison and may lead to an incorrect conclusion.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: RM = 6, MQ = 8, PR = 7, PQ = 10. Compute: \[ \dfrac{RM}{MQ} = \dfrac{6}{8} = \dfrac{3}{4} \]
  2. Step 2: Compute: \[ \dfrac{PR}{PQ} = \dfrac{7}{10} \]
  3. Step 3: Compare using a common denominator: \[ \dfrac{3}{4} = \dfrac{15}{20} \ne \dfrac{14}{20} = \dfrac{7}{10} \] Since \( \dfrac{RM}{MQ} \ne \dfrac{PR}{PQ} \), PM does NOT bisect \( \angle QPR \).

Answer: Ray PM is NOT the bisector of \( \angle QPR \), because \( \dfrac{RM}{MQ} = \dfrac{3}{4} \) while \( \dfrac{PR}{PQ} = \dfrac{7}{10} \), and these ratios are unequal.

➕ More Examples

More Examples

Example 1

Question: In triangle PQR, a point M lies on QR such that QM = 4 cm, MR = 6 cm, PQ = 8 cm, and PR = 12 cm. Determine whether ray PM is the bisector of angle QPR.

Solution: We use the Angle Bisector Theorem, which states that PM bisects angle QPR if and only if QM/MR = PQ/PR. First, find the ratio of the segments on QR: \[ \frac{QM}{MR} = \frac{4}{6} = \frac{2}{3} \] Next, find the ratio of the sides adjacent to angle QPR: \[ \frac{PQ}{PR} = \frac{8}{12} = \frac{2}{3} \] Since both ratios are equal, i.e., \[ \frac{QM}{MR} = \frac{PQ}{PR} = \frac{2}{3} \] the condition of the Angle Bisector Theorem is satisfied.

Answer: Yes, ray PM is the bisector of angle QPR.

Example 2

Question: In triangle PQR, point M is on side QR with QM = 5 cm, MR = 8 cm, PQ = 10 cm, and PR = 15 cm. Is ray PM the bisector of angle QPR?

Solution: We apply the Angle Bisector Theorem: PM bisects angle QPR if and only if QM/MR = PQ/PR. Compute the ratio of the segments created on QR: \[ \frac{QM}{MR} = \frac{5}{8} \] Compute the ratio of the two sides of the triangle that form angle QPR: \[ \frac{PQ}{PR} = \frac{10}{15} = \frac{2}{3} \] Now compare the two ratios. We check whether \( \frac{5}{8} = \frac{2}{3} \). Cross-multiplying: \[ 5 \times 3 = 15 \quad \text{and} \quad 8 \times 2 = 16 \] Since \( 15 \ne 16 \), the two ratios are not equal, so the condition of the Angle Bisector Theorem is not satisfied.

Answer: No, ray PM is NOT the bisector of angle QPR.

🎯 Try a Similar Question

Try a Similar Question

Question: In triangle PQR, point M lies on side QR. The following measurements are given: \( PQ = 6 \) cm, \( PR = 9 \) cm, \( QM = 4 \) cm, and \( MR = 6 \) cm. Determine whether ray PM is the bisector of \( \angle QPR \). Justify your answer.

Solution

  1. Step 1: State the Angle Bisector Theorem condition: By the Angle Bisector Theorem, ray PM bisects \( \angle QPR \) if and only if \[ \frac{QM}{MR} = \frac{PQ}{PR} \]
  2. Step 2: Calculate the ratio of the segments on QR: Using the given values \( QM = 4 \) cm and \( MR = 6 \) cm: \[ \frac{QM}{MR} = \frac{4}{6} = \frac{2}{3} \]
  3. Step 3: Calculate the ratio of the sides adjacent to angle QPR: Using the given values \( PQ = 6 \) cm and \( PR = 9 \) cm: \[ \frac{PQ}{PR} = \frac{6}{9} = \frac{2}{3} \]
  4. Step 4: Compare the two ratios: We find \[ \frac{QM}{MR} = \frac{2}{3} \quad \text{and} \quad \frac{PQ}{PR} = \frac{2}{3} \] Since both ratios are equal, the condition of the Angle Bisector Theorem is satisfied.
  5. Step 5: Conclusion: Because \( \dfrac{QM}{MR} = \dfrac{PQ}{PR} = \dfrac{2}{3} \), ray PM IS the bisector of \( \angle QPR \).

Answer: Ray PM IS the bisector of \( \angle QPR \), because \( \dfrac{QM}{MR} = \dfrac{2}{3} \) and \( \dfrac{PQ}{PR} = \dfrac{2}{3} \), and these ratios are equal.

Everything you get with Solver7

More questions in Similarity

Chapter 7 Examples Q1 Practice Set 7.1 Q1 Practice Set 7.2 Q1 (i) Practice Set 7.3 Q1 Practice Set 7.4 Q1 Problem Set 7 Q1 (i) 03/2018 2018 / Question 1 Q1 03/2019 2019 / Question 1 QA (i) 03/2019 2019 / Question 3 QA (i) N397 2024 / Question 1 QA (i) N397 2024 / Question 3 QA (i) N397 2026 / Question 3 QA (i) N397 2026 / Question 4 Q1 N632 2024 / Question 3 QA (i) N697 2025 / Question 1 QA (i) N697 2025 / Question 2 QA (i) N697 2025 / Question 4 Q1 N723 2022 / Question 1 QA (i) N723 2022 / Question 2 QA (i) N832 2025 / Question 3 QA (i) N832 2025 / Question 4 Q1 (i) N926 2023 / Question 3 QA (i) N926 2023 / Question 4 Q1 N932 2026 / Question 3 QA (i) Chapter 7 Examples Q2 Practice Set 7.1 Q2 Practice Set 7.3 Q2 Practice Set 7.4 Q2 Problem Set 7 Q1 (ii) N632 2024 / Question 5 Q1 (b) N832 2025 / Question 4 Q1 (ii) Chapter 7 Examples Q3 Practice Set 7.1 Q3 Practice Set 7.2 Q1 (iii) Practice Set 7.3 Q3 Practice Set 7.4 Q3 Problem Set 7 Q1 (iii) N632 2024 / Question 5 Q1 (c) N723 2022 / Question 3 QB (i) N932 2026 / Question 4 Q3 Chapter 7 Examples Q4 Practice Set 7.1 Q4 Practice Set 7.2 Q2 Practice Set 7.3 Q4 Practice Set 7.4 Q4 Problem Set 7 Q1 (iv) N397 2026 / Question 2 QB (i) N697 2025 / Question 2 QB (i) N723 2022 / Question 2 QB (i) N832 2025 / Question 2 QB (i) N926 2023 / Question 2 QB (i) Chapter 7 Examples Q5 (i) Practice Set 7.1 Q5 (i) Practice Set 7.2 Q3 Practice Set 7.3 Q5 Practice Set 7.4 Q5 Problem Set 7 Q1 (v) N397 2024 / Question 2 QB (ii) N632 2024 / Question 1 QB (i) N832 2025 / Question 1 QB (i)