SOLVER7 Study. Nothing Else.
Practice Set 11.3 Q2 (vi)

Find the slopes of the lines passing through the given points. \(T(0,-3),S(0,4)\)

MAH STATE BOARD Mah SB Class 10 Maths · Coordinate Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine a lift going straight up a building wall. It never moves left or right — only up and down. The two points T and S are like two floors on that same wall. Both sit directly on the y-axis, so the line between them is perfectly vertical. Slope tells us how much a line tilts sideways. A wall has zero sideways tilt, so we simply cannot give slope a number. Mathematicians say the slope is undefined, which just means the answer does not exist.

Answer: The slope of the line passing through \(T(0, -3)\) and \(S(0, 4)\) is not defined (the line is vertical).

📖 Slope of Line Through T(0,-3) and S(0,4)

Detailed Explanation

The slope of a line measures how steep the line is. If a line passes through two points \((x_1, y_1)\) and \((x_2, y_2)\), then its slope is the ratio of the change in the \(y\)-coordinates to the change in the \(x\)-coordinates. When both points have the same \(x\)-coordinate, the line is vertical (parallel to the \(y\)-axis), and the denominator in the slope formula becomes zero. Division by zero is undefined, so the slope of a vertical line is said to be undefined (or does not exist).

Formula Used

\[ \text{slope} = m = \dfrac{y_2 - y_1}{x_2 - x_1} \]

Solution

  1. Step 1: Identify the coordinates of the two given points. Let \((x_1, y_1) = T(0, -3)\) and \((x_2, y_2) = S(0, 4)\).
  2. Step 2: Write the slope formula: \[ m = \dfrac{y_2 - y_1}{x_2 - x_1} \]
  3. Step 3: Substitute the values into the formula: \[ m = \dfrac{4 - (-3)}{0 - 0} = \dfrac{7}{0} \]
  4. Step 4: Since the denominator is \(0\), the fraction \(\dfrac{7}{0}\) is not defined. This means the slope does not exist.
  5. Step 5: Observe that both points \(T\) and \(S\) have \(x\)-coordinate \(0\), so they lie on the \(y\)-axis. The line through them is vertical, which confirms that its slope is undefined.

Final Answer

The slope of the line passing through \(T(0, -3)\) and \(S(0, 4)\) is not defined (the line is vertical).

Common Mistake

A common mistake is to write the slope as \(0\) when the denominator becomes \(0\). Remember: a slope of \(0\) means a horizontal line (when \(y_2 - y_1 = 0\)), but when \(x_2 - x_1 = 0\), the slope is undefined, not zero.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Label the coordinates of the two given points. Let \( (x_1, y_1) = T(0, -3) \) and \( (x_2, y_2) = S(0, 4) \) — Reason: Assigning labels makes it easy to substitute values correctly into the slope formula without confusion.
  2. Step 2: Write down the slope formula: \[ m = \dfrac{y_2 - y_1}{x_2 - x_1} \] — Reason: This is the standard tool for finding the steepness of any line given two points.
  3. Step 3: Substitute the coordinates into the formula. The numerator becomes \( 4 - (-3) \) and the denominator becomes \( 0 - 0 \): \[ m = \dfrac{4 - (-3)}{0 - 0} \] — Reason: Direct substitution replaces abstract variables with the actual numbers from the problem.
  4. Step 4: Simplify the numerator and denominator separately. The numerator gives \( 4 + 3 = 7 \) and the denominator gives \( 0 \): \[ m = \dfrac{7}{0} \] — Reason: Simplifying each part clearly shows what value we are trying to compute.
  5. Step 5: Recognise that division by zero is not allowed in mathematics. Since \( \dfrac{7}{0} \) has a zero in the denominator, the slope \( m \) does not exist — Reason: No number multiplied by zero can ever equal 7, so this fraction has no valid numerical answer.
  6. Step 6: Confirm the result geometrically. Both points \( T(0, -3) \) and \( S(0, 4) \) have \( x \)-coordinate equal to \( 0 \), meaning they both lie on the y-axis. A line through two points on the y-axis is perfectly vertical — Reason: A vertical line has no horizontal run at all, which is exactly why its slope cannot be expressed as a finite number.

Final Answer

The slope of the line passing through \(T(0, -3)\) and \(S(0, 4)\) is not defined (the line is vertical).

Common Mistake

One common mistake: Students sometimes write the slope as 0 instead of undefined. A slope of 0 belongs to a horizontal line (zero rise, nonzero run), whereas a vertical line has zero run in the denominator, making the slope undefined — these two cases are opposite and must not be mixed up.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( T(0,\ -3) \) and \( S(0,\ 4) \)
  2. Step 2: \[ m = \dfrac{4 - (-3)}{0 - 0} = \dfrac{7}{0} \]
  3. Step 3: Denominator \( = 0 \), so slope is undefined (vertical line).

Answer: The slope of the line passing through \(T(0, -3)\) and \(S(0, 4)\) is not defined (the line is vertical).

➕ More Examples

More Examples

Example 1

Question: Find the slope of the line passing through the points \( A(5, 2) \) and \( B(5, -6) \).

Solution: Let \( (x_1, y_1) = (5, 2) \) and \( (x_2, y_2) = (5, -6) \). Using the slope formula: \[ m = \frac{y_2 - y_1}{x_2 - x_1} = \frac{-6 - 2}{5 - 5} = \frac{-8}{0} \] Since the denominator is 0, division is undefined. The two points have the same x-coordinate, meaning the line is vertical. Therefore, the slope is undefined.

Answer: Slope is undefined (vertical line).

Example 2

Question: Find the slope of the line passing through the points \( P(-3, 7) \) and \( Q(9, 7) \).

Solution: Let \( (x_1, y_1) = (-3, 7) \) and \( (x_2, y_2) = (9, 7) \). Using the slope formula: \[ m = \frac{y_2 - y_1}{x_2 - x_1} = \frac{7 - 7}{9 - (-3)} = \frac{0}{12} = 0 \] The numerator is 0, meaning there is no rise between the two points. The two points have the same y-coordinate, so the line is horizontal. Therefore, the slope is 0.

Answer: Slope \( m = 0 \) (horizontal line).

🎯 Try a Similar Question

Try a Similar Question

Question: Find the slope of the line passing through the points \( A(-5, 7) \) and \( B(3, 7) \).

Solution

  1. Step 1: Identify the coordinates: We have \( A(-5,\, 7) \) and \( B(3,\, 7) \). So \( x_1 = -5 \), \( y_1 = 7 \), \( x_2 = 3 \), \( y_2 = 7 \).
  2. Step 2: Apply the slope formula: Using the slope formula: \[ m = \frac{y_2 - y_1}{x_2 - x_1} \]
  3. Step 3: Substitute the values: Substituting the coordinates: \[ m = \frac{7 - 7}{3 - (-5)} = \frac{0}{8} \]
  4. Step 4: Simplify: Simplifying: \[ m = 0 \] Since the numerator is 0 and the denominator is non-zero, the slope is 0.
  5. Step 5: Interpret the result: A slope of 0 means the line is perfectly horizontal. This makes sense because both points have the same y-coordinate of \( 7 \).

Answer: The slope of the line passing through \( A(-5, 7) \) and \( B(3, 7) \) is \( m = 0 \) (the line is horizontal).

Everything you get with Solver7

More questions in Coordinate Geometry

Chapter 11 Examples Q1 Practice Set 11.1 Q1 (i) Practice Set 11.2 Q1 Practice Set 11.3 Q1 (i) Problem Set 11 Q1 (i) 03/2019 2019 / Question 6 Q1 N723 2022 / Question 4 Q1 N913 2023 / Question 5 Q1 Chapter 11 Examples Q2 Practice Set 11.1 Q1 (ii) Practice Set 11.2 Q2 Practice Set 11.3 Q1 (ii) Problem Set 11 Q1 (ii) N397 2024 / Question 5 Q2 N397 2026 / Question 3 QA (ii) N723 2022 / Question 3 QA (ii) N926 2023 / Question 3 QA (ii) N926 2023 / Question 5 Q2 Chapter 11 Examples Q3 Practice Set 11.1 Q1 (iii) Practice Set 11.2 Q2 (ii) Practice Set 11.3 Q1 (iii) Problem Set 11 Q1 (iii) 03/2018 2018 / Question 4 Q3 N397 2024 / Question 1 QA (iii) N397 2026 / Question 1 QA (iii) N632 2024 / Question 1 QA (iii) N632 2024 / Question 3 QB (i) N697 2025 / Question 1 QA (iii) N697 2025 / Question 3 QB (i) N723 2022 / Question 1 QA (iii) N723 2022 / Question 4 Q3 N832 2025 / Question 1 QA (iii) N832 2025 / Question 3 QB (i) N926 2023 / Question 1 QA (iii) N932 2026 / Question 1 QA (iii) Chapter 11 Examples Q4 Practice Set 11.1 Q1 (iv) Practice Set 11.2 Q2 (iii) Practice Set 11.3 Q2 (i) Problem Set 11 Q1 (iv) 03/2019 2019 / Question 1 QA (iv) Chapter 11 Examples Q5 Practice Set 11.1 Q1 (v) Practice Set 11.2 Q3 Practice Set 11.3 Q2 (ii) Problem Set 11 Q2 (i) 03/2019 2019 / Question 3 QB (ii) N397 2024 / Question 3 QB (iii) N832 2025 / Question 2 QB (ii) N932 2026 / Question 3 QB (iii) Chapter 11 Examples Q6 Practice Set 11.1 Q1 (vi) Practice Set 11.2 Q4 Practice Set 11.3 Q2 (iii) Problem Set 11 Q2 (ii) Chapter 11 Examples Q7 Practice Set 11.1 Q2 (i) Practice Set 11.2 Q5 Practice Set 11.3 Q2 (iv)