SOLVER7 Study. Nothing Else.
Exercise 10.2 Q19

If \(\overrightarrow{a}\) and \(\overrightarrow{b}\) are two collinear vectors, then which of the following are incorrect: (A)\(\overrightarrow{b}=\lambda\overrightarrow{a},\) for some scalar\(\lambda\)
(B)\(\overrightarrow{a}=\pm\overrightarrow{b}\) (C)the respective components of \(\overrightarrow{a}\) and \(\overrightarrow{b}\) are not proportional
(D) both the vectors \(\overrightarrow{a}\) and \(\overrightarrow{b}\) have same direction, but different magnitudes.

CBSE Class 12 Maths · Vector Algebra

Solution

👶 Simple Explanation

Simple Explanation

Imagine two arrows drawn on paper, both pointing along the same straight line. They can be long or short, and can even point in opposite directions. Collinear vectors are exactly like that — they live on the same line. The only rule is that one arrow must be a stretched or shrunk version of the other, like multiplying by any number. Statement (A) captures this perfectly. The other statements add extra conditions that are too strict and rule out perfectly good collinear vectors.

Answer: The incorrect statements are (B), (C) and (D). Only statement (A), namely \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \), correctly characterises collinear vectors.

📖 Identifying Incorrect Statements about Collinear Vectors

Detailed Explanation

Two vectors \( \vec{a} \) and \( \vec{b} \) are said to be collinear if they are parallel to the same line, irrespective of their magnitudes and directions. The key defining property is that one vector can be written as a scalar multiple of the other, that is \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \). This scalar \( \lambda \) can be positive (same direction), negative (opposite direction), and can have any magnitude (so the lengths may differ). A direct consequence is that their corresponding components are always proportional. Using these facts, we test each statement.

Formula Used

If \( \vec{a} \) and \( \vec{b} \) are collinear, then \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \). If \( \vec{a} = a_1 \hat{i} + a_2 \hat{j} + a_3 \hat{k} \) and \( \vec{b} = b_1 \hat{i} + b_2 \hat{j} + b_3 \hat{k} \), then \( \frac{b_1}{a_1} = \frac{b_2}{a_2} = \frac{b_3}{a_3} = \lambda \).

Solution

  1. Step 1: Check statement (A): \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \). This is exactly the definition of collinear vectors. So statement (A) is CORRECT.
  2. Step 2: Check statement (B): \( \vec{a} = \pm \vec{b} \). This would force the scalar \( \lambda \) to be only \( +1 \) or \( -1 \), meaning the two vectors must have equal magnitudes. But collinear vectors can have different magnitudes, for example \( \vec{b} = 3\vec{a} \). Hence statement (B) is INCORRECT.
  3. Step 3: Check statement (C): the respective components of \( \vec{a} \) and \( \vec{b} \) are NOT proportional. For collinear vectors the components ARE proportional, since \( \vec{b} = \lambda \vec{a} \) gives \( \frac{b_1}{a_1} = \frac{b_2}{a_2} = \frac{b_3}{a_3} = \lambda \). This statement claims the opposite, so statement (C) is INCORRECT.
  4. Step 4: Check statement (D): both vectors have the same direction but different magnitudes. Collinear vectors need not point in the same direction; if \( \lambda < 0 \) they point in opposite directions. Since (D) insists on the SAME direction only, it does not describe all collinear vectors, so statement (D) is INCORRECT.
  5. Step 5: Collect the results. Only (A) correctly describes collinear vectors. Statements (B), (C) and (D) each fail for some collinear vectors, so they are the incorrect ones.

Final Answer

The incorrect statements are (B), (C) and (D). Only statement (A), namely \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \), correctly characterises collinear vectors.

Common Mistake

A common mistake is assuming collinear vectors must always point in the same direction or have equal magnitudes. In reality \( \lambda \) can be any scalar (positive, negative, or of any size), so collinear vectors can be oppositely directed and of different lengths.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Recall the definition of collinear vectors: two vectors \( \vec{a} \) and \( \vec{b} \) are collinear when they are parallel to the same line, no matter what their magnitudes or directions are. The scalar \( \lambda \) can be any real number — positive, negative, or a fraction — so the vectors may point in the same direction, opposite directions, or have entirely different lengths. — Reason: Establishing the precise definition prevents misidentifying which statement is correct.
  2. Step 2: Evaluate statement (A): \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \). This is word-for-word the standard definition of collinear vectors. Because \( \lambda \) is unrestricted, it covers every possible collinear relationship. — Reason: Matching a statement directly to the definition immediately confirms whether it is correct; statement (A) is CORRECT.
  3. Step 3: Evaluate statement (B): \( \vec{a} = \pm \vec{b} \). This condition forces \( \lambda = +1 \) or \( \lambda = -1 \), which means both vectors must have identical magnitudes. However, consider a simple counterexample: \( \vec{b} = 3\vec{a} \). These are clearly collinear (one is a scalar multiple of the other), yet \( |\vec{b}| = 3|\vec{a}| \neq |\vec{a}| \), so \( \vec{a} \neq \pm \vec{b} \). — Reason: A single valid counterexample is enough to disprove a universal statement; statement (B) is INCORRECT.
  4. Step 4: Evaluate statement (C): the respective components of \( \vec{a} \) and \( \vec{b} \) are equal. This would require \( a_1 = b_1 \), \( a_2 = b_2 \), and \( a_3 = b_3 \), which simply means \( \vec{a} = \vec{b} \) — a far stronger condition than collinearity. For example, \( \vec{b} = 2\vec{a} \) is collinear but the components are not equal. — Reason: Collinearity only needs proportional components, not equal ones; statement (C) is INCORRECT.
  5. Step 5: Evaluate statement (D): \( \vec{a} \) and \( \vec{b} \) must have both the same magnitude and the same direction. Same direction alone corresponds to \( \lambda > 0 \), and adding equal magnitude would force \( \lambda = 1 \) exactly. But collinear vectors can have opposite directions (\( \lambda < 0 \)) and need not share the same length at all. — Reason: Collinearity is a weaker condition than vectors being identical in magnitude and direction; statement (D) is INCORRECT.
  6. Step 6: Summarise the findings: statement (A) matches the definition exactly and is CORRECT; statements (B), (C), and (D) each impose extra restrictions that are not required by the definition of collinearity and are therefore INCORRECT. — Reason: Comparing every statement against the core definition gives a complete and systematic answer.

Final Answer

The incorrect statements are (B), (C) and (D). Only statement (A), namely \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \), correctly characterises collinear vectors.

Common Mistake

One common mistake: students confuse collinear vectors with equal vectors, assuming collinear vectors must have the same magnitude. Remember that \( \lambda \) can be any non-zero real number, so the magnitudes of \( \vec{a} \) and \( \vec{b} \) can differ freely.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Statement (A): \( \vec{b} = \lambda \vec{a} \) — this is the definition of collinear vectors. CORRECT.
  2. Step 2: Statement (B): \( \vec{a} = \pm \vec{b} \) — forces \( \lambda = \pm 1 \) only, but \( \lambda \) can be any scalar (e.g. \( \vec{b} = 3\vec{a} \)). INCORRECT.
  3. Step 3: Statement (C): components proportional with equal ratios — this is a consequence, not a definition; fails if any component is zero. INCORRECT.
  4. Step 4: Statement (D): collinear vectors must have equal magnitudes — false, since \( |\vec{b}| = |\lambda||\vec{a}| \) allows \( |\lambda| \ne 1 \). INCORRECT.

Answer: The incorrect statements are (B), (C) and (D). Only statement (A), namely \( \vec{b} = \lambda \vec{a} \) for some scalar \( \lambda \), correctly characterises collinear vectors.

➕ More Examples

More Examples

Example 1

Question: Let \( \vec{p} \) and \( \vec{q} \) be two collinear vectors. Which of the following statements are INCORRECT? (A) The components of \( \vec{p} \) and \( \vec{q} \) are always proportional. (B) \( \vec{p} \) and \( \vec{q} \) must have the same magnitude. (C) \( \vec{q} = \mu \vec{p} \) for some scalar \( \mu \). (D) \( \vec{p} \) and \( \vec{q} \) must point in the same direction only.

Solution: We analyse each statement for two collinear vectors \( \vec{p} \) and \( \vec{q} \). Statement (A): If \( \vec{p} = a_1 \hat{i} + b_1 \hat{j} + c_1 \hat{k} \) and \( \vec{q} = a_2 \hat{i} + b_2 \hat{j} + c_2 \hat{k} \) are collinear, then \( \vec{q} = \mu \vec{p} \), which means their components satisfy \( \frac{a_2}{a_1} = \frac{b_2}{b_1} = \frac{c_2}{c_1} = \mu \). So statement (A) is CORRECT. Statement (B): For collinear vectors, we only need \( \vec{q} = \mu \vec{p} \). If \( \mu \ne \pm 1 \), the magnitudes differ. For example, \( \vec{p} = 2\hat{i} \) and \( \vec{q} = 6\hat{i} \) are collinear but \( |\vec{p}| = 2 \ne 6 = |\vec{q}| \). So statement (B) is INCORRECT. Statement (C): By definition of collinear vectors, \( \vec{q} = \mu \vec{p} \) for some scalar \( \mu \). So statement (C) is CORRECT. Statement (D): Collinear vectors can point in the same direction (when \( \mu > 0 \)) OR in opposite directions (when \( \mu < 0 \)). Restricting to the same direction only is incorrect. So statement (D) is INCORRECT. Therefore, the INCORRECT statements are (B) and (D).

Answer: Statements (B) and (D) are incorrect.

Example 2

Question: \( \vec{u} \) and \( \vec{v} \) are two collinear vectors. Identify which of the following statements are INCORRECT: (A) \( \vec{u} \times \vec{v} = \vec{0} \) (the zero vector). (B) The vectors \( \vec{u} \) and \( \vec{v} \) cannot be in opposite directions. (C) \( \vec{v} = k\vec{u} \) for some non-zero scalar \( k \). (D) \( \vec{u} \cdot \vec{v} = |\vec{u}||\vec{v}| \) always.

Solution: We examine each statement for collinear vectors \( \vec{u} \) and \( \vec{v} \). Statement (A): If \( \vec{v} = k\vec{u} \), then the cross product is \[ \vec{u} \times \vec{v} = \vec{u} \times (k\vec{u}) = k(\vec{u} \times \vec{u}) = k \cdot \vec{0} = \vec{0}. \] This is always true for collinear vectors. So statement (A) is CORRECT. Statement (B): Collinear vectors can have \( k < 0 \), meaning they point in opposite directions. For instance, \( \vec{u} = \hat{i} + \hat{j} \) and \( \vec{v} = -3\hat{i} - 3\hat{j} \) are collinear but in opposite directions. So statement (B) is INCORRECT. Statement (C): By the definition of collinearity, \( \vec{v} = k\vec{u} \) for some scalar \( k \ne 0 \). So statement (C) is CORRECT. Statement (D): The dot product formula gives \[ \vec{u} \cdot \vec{v} = |\vec{u}||\vec{v}|\cos\theta \] where \( \theta \) is the angle between them. For collinear vectors, \( \theta = 0^{\circ} \) or \( \theta = 180^{\circ} \). When \( \theta = 180^{\circ} \), \( \cos\theta = -1 \), so \[ \vec{u} \cdot \vec{v} = -|\vec{u}||\vec{v}| \ne |\vec{u}||\vec{v}|. \] Statement (D) claims the dot product always equals \( |\vec{u}||\vec{v}| \) (implying \( \theta = 0^{\circ} \) only), which is not always true. So statement (D) is INCORRECT. Therefore, the INCORRECT statements are (B) and (D).

Answer: Statements (B) and (D) are incorrect.

🎯 Try a Similar Question

Try a Similar Question

Question: Let \( \vec{p} \) and \( \vec{q} \) be two collinear vectors. Identify which of the following statements are CORRECT: (A) The respective components of \( \vec{p} \) and \( \vec{q} \) are proportional. (B) \( \vec{p} \times \vec{q} = \vec{0} \). (C) \( \vec{p} \) and \( \vec{q} \) must have the same magnitude. (D) \( \vec{p} \) and \( \vec{q} \) must point in the same direction.

Solution

  1. Step 1: Recall the definition of collinear vectors: Two vectors \( \vec{p} \) and \( \vec{q} \) are collinear if one is a scalar multiple of the other, i.e., \( \vec{p} = \lambda \vec{q} \) for some scalar \( \lambda \in \mathbb{R} \). The scalar \( \lambda \) can be any real number — positive, negative, or any non-zero value.
  2. Step 2: Analyse Statement (A): Statement (A): The respective components of \( \vec{p} \) and \( \vec{q} \) are proportional. If \( \vec{p} = \lambda \vec{q} \), then every component of \( \vec{p} \) equals \( \lambda \) times the corresponding component of \( \vec{q} \). For example, if \( \vec{q} = q_1 \hat{i} + q_2 \hat{j} + q_3 \hat{k} \), then \( \vec{p} = \lambda q_1 \hat{i} + \lambda q_2 \hat{j} + \lambda q_3 \hat{k} \), so the components are in the ratio \( \lambda : 1 \). Statement (A) is CORRECT.
  3. Step 3: Analyse Statement (B): Statement (B): \( \vec{p} \times \vec{q} = \vec{0} \). The cross product of two collinear vectors is always the zero vector because the angle \( \theta \) between them is either \( 0^\circ \) or \( 180^\circ \), giving \( |\vec{p} \times \vec{q}| = |\vec{p}||\vec{q}|\sin\theta = 0 \). Alternatively, \( \vec{p} = \lambda \vec{q} \) implies \( \vec{p} \times \vec{q} = \lambda \vec{q} \times \vec{q} = \lambda \vec{0} = \vec{0} \). Statement (B) is CORRECT.
  4. Step 4: Analyse Statement (C): Statement (C): \( \vec{p} \) and \( \vec{q} \) must have the same magnitude. This is false. If \( \vec{p} = \lambda \vec{q} \) with \( \lambda \ne \pm 1 \), then \( |\vec{p}| = |\lambda||\vec{q}| \ne |\vec{q}| \). For example, \( \vec{p} = 2\hat{i} \) and \( \vec{q} = 5\hat{i} \) are collinear but have different magnitudes. Statement (C) is INCORRECT.
  5. Step 5: Analyse Statement (D): Statement (D): \( \vec{p} \) and \( \vec{q} \) must point in the same direction. This is false. Collinear vectors can point in opposite directions when the scalar \( \lambda \) is negative. For example, \( \vec{p} = 3\hat{j} \) and \( \vec{q} = -3\hat{j} \) are collinear but point in opposite directions. Statement (D) is INCORRECT.
  6. Step 6: Conclusion: Among the four statements, (A) and (B) are correct characterisations of collinear vectors, while (C) and (D) are incorrect.

Answer: Statements (A) and (B) are CORRECT. Statements (C) and (D) are INCORRECT. Collinear vectors need not have the same magnitude (they are related by any scalar \( \lambda \)), and they can point in the same or opposite directions depending on the sign of \( \lambda \).

Everything you get with Solver7

More questions in Vector Algebra

Chapter 10 Examples Q1 Chapter 10 Examples Q2(i) Chapter 10 Examples Q2(ii) Chapter 10 Examples Q2(iii) 65/2/1 2022 / Section A Q3 65/2/2 2023 / Section A Q4 Chapter 10 Examples Q2(iv) 65/2/2 2023 / Section A Q5 65/4/1 2022 / Section A Q4(a) Chapter 10 Examples Q2(v) 65/2/2 2023 / Section A Q6 65/4/1 2022 / Section A Q4(b) Chapter 10 Examples Q2(vi) 65/1/1 2024 / Section A Q7 Chapter 10 Examples Q3(i) 65/1/1 2023 / Section A Q8 65/2/1 2022 / Section B Q7 65/2/1 2024 / Section A Q8 65/3/1 2024 / Section A Q8 Chapter 10 Examples Q3(ii) 65/1/1 2023 / Section A Q9 Chapter 10 Examples Q3(iii) 65/1/1 2023 / Section A Q10 65/3/1 2023 / Section A Q10 Chapter 10 Examples Q4 65/3/1 2023 / Section A Q11 Chapter 10 Examples Q5 65(B) 2026 / Section A Q12 65/3/1 2023 / Section A Q12 65/4/1 2022 / Section B Q9 65/4/1 2023 / Section A Q12 Chapter 10 Examples Q6 65(B) 2026 / Section A Q13 65/1/1 2026 / Section A Q13 65/3/1 2023 / Section A Q13 65/4/1 2023 / Section A Q13 Chapter 10 Examples Q7 65/1/1 2026 / Section A Q14 65/3/1 2026 / Section A Q14 65/4/2 2024 / Section A Q14 Chapter 10 Examples Q8 65/1/1 2024 / Section A Q15 65/1/1 2026 / Section A Q15 65/2/1 2024 / Section A Q15 65/3/1 2024 / Section A Q15 65/3/1 2026 / Section A Q15 65/4/2 2024 / Section A Q15 Chapter 10 Examples Q9 65/4/1 2026 / Section A Q16 65/4/2 2024 / Section A Q16 65/5/1 2026 / Section A Q16 Chapter 10 Examples Q10 65/2/3 2026 / Section A Q17 65/4/1 2026 / Section A Q17 65/4/2 2024 / Section A Q17 65/5/1 2026 / Section A Q17 Chapter 10 Examples Q11(i) 65/2/3 2026 / Section A Q18 Chapter 10 Examples Q11(ii) 65/2/3 2026 / Section A Q19