SOLVER7 Study. Nothing Else.
2023 Board Paper Q37(i)

A tank, as shown in the figure below, formed using a combination of a cylinder and a cone, offers better drainage as compared to a flat bottomed tank. A tap is connected to such a tank whose conical part is full of water. Water is dripping out from a tap at the bottom at the uniform rate of \(2 cm^3/s.\) The semi-vertical angle of the conical tank is \(45^\circ.\)On the basis of given information, answer the following questions : Find the volume of water in the tank in terms of its radius \(r.\)

CBSE Class 12 Maths · Application of Integrals

Solution

👶 Simple Explanation

Simple Explanation

Imagine filling a party hat with water. The hat is shaped like a cone, pointy at the bottom and wide at the top. The special thing here is that the hat is tilted at exactly \( 45^\circ \), which means the width and the height of the water are always equal. So whenever the water is, say, 3 units tall, it is also 3 units wide. Because of this neat trick, we only need one number to describe the water's size. That one number gives us the volume.

Answer: The volume of water in the tank in terms of its radius \( r \) is \[ V = \frac{1}{3}\pi r^3. \]

📖 Volume of Water in a Conical Tank

Detailed Explanation

The water is contained inside the conical (bottom) part of the tank. To find its volume we use the formula for the volume of a cone. The key idea is that the shape of the water is a cone with some radius \( r \) (the radius of the water surface) and some height \( h \). The semi-vertical angle is the angle between the axis of the cone and its slant side. Since this angle is given as \( 45^\circ \), it creates a fixed relationship between \( r \) and \( h \). Using this relationship we can rewrite the volume using only one variable, \( r \).

Formula Used

Volume of a cone: \[ V = \frac{1}{3}\pi r^2 h \] where \( r \) is the base radius and \( h \) is the height of the water cone.

Solution

  1. Step 1: Let \( r \) be the radius of the water surface (top of the cone of water) and \( h \) be the height of the water in the conical part. The volume of the water, being a cone, is given by \[ V = \frac{1}{3}\pi r^2 h. \]
  2. Step 2: Use the semi-vertical angle. The semi-vertical angle \( \theta \) is the angle between the vertical axis and the slant side of the cone. From the geometry of the cone, \[ \tan\theta = \frac{r}{h}. \] Here the radius \( r \) is opposite the axis and the height \( h \) is along the axis.
  3. Step 3: Substitute \( \theta = 45^\circ \). Since \( \tan 45^\circ = 1 \), we get \[ \frac{r}{h} = 1 \] which gives \[ h = r. \] This tells us the height of the water equals its surface radius.
  4. Step 4: Replace \( h \) with \( r \) in the volume formula so that the volume depends only on \( r \): \[ V = \frac{1}{3}\pi r^2 (r). \]
  5. Step 5: Simplify to obtain the final expression: \[ V = \frac{1}{3}\pi r^3. \]

Final Answer

The volume of water in the tank in terms of its radius \( r \) is \[ V = \frac{1}{3}\pi r^3. \]

Common Mistake

A common mistake is writing \( \tan\theta = \frac{h}{r} \) instead of \( \tan\theta = \frac{r}{h} \). Although both give \( h = r \) when the angle is \( 45^\circ \), using the wrong ratio for other angles leads to incorrect substitution and a wrong volume expression.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Let \( r \) denote the radius of the water surface and \( h \) denote the height of the water inside the conical tank. Write the volume formula: \[ V = \frac{1}{3}\pi r^2 h \] — Reason: The water occupying the conical portion forms a cone itself, so the standard cone volume formula applies directly.
  2. Step 2: Identify the semi-vertical angle. The semi-vertical angle \( \theta \) is the angle between the vertical axis of the cone and its slant side. From the right triangle formed by the axis, the radius, and the slant side: \[ \tan\theta = \frac{r}{h} \] — Reason: In this right triangle, \( r \) is the side opposite \( \theta \) and \( h \) is the side adjacent to \( \theta \), so the tangent ratio gives exactly \( r/h \).
  3. Step 3: Substitute \( \theta = 45^{\circ} \). Since \( \tan 45^{\circ} = 1 \): \[ \frac{r}{h} = 1 \] which means \[ h = r \] — Reason: Plugging in the given angle collapses the two-variable relationship into the elegant result that the water's height always equals its surface radius.
  4. Step 4: Replace \( h \) with \( r \) in the volume formula: \[ V = \frac{1}{3}\pi r^2 \cdot r \] — Reason: Substituting \( h = r \) eliminates the second variable so the volume depends on \( r \) alone.
  5. Step 5: Simplify the expression by combining the powers of \( r \): \[ V = \frac{1}{3}\pi r^3 \] — Reason: \( r^2 \cdot r = r^3 \), giving the final compact formula entirely in terms of \( r \).

Final Answer

The volume of water in the tank in terms of its radius \( r \) is \[ V = \frac{1}{3}\pi r^3. \]

Common Mistake

One common mistake: Students sometimes confuse the semi-vertical angle with the full apex angle of the cone and incorrectly use \( 2 \times 45^{\circ} = 90^{\circ} \) or write \( \tan\theta = h/r \) (inverting the ratio), which gives a wrong relationship between \( r \) and \( h \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Volume of water cone: \[ V = \frac{1}{3}\pi r^2 h \]
  2. Step 2: Semi-vertical angle \( = 45^\circ \), so \( \tan 45^\circ = \frac{r}{h} = 1 \), giving \( h = r \).
  3. Step 3: Substitute \( h = r \): \[ V = \frac{1}{3}\pi r^2 \cdot r = \frac{1}{3}\pi r^3 \]

Answer: The volume of water in the tank in terms of its radius \( r \) is \[ V = \frac{1}{3}\pi r^3. \]

➕ More Examples

More Examples

Example 1

Question: A conical vessel (vertex at the bottom) is filled with water. The semi-vertical angle of the cone is \( 30^\circ \). Express the volume of water in the vessel in terms of its radius \( r \) only.

Solution: Step 1: Recall the formula for the volume of a cone. If the water forms a cone of radius \( r \) and height \( h \), then \[V = \frac{1}{3}\pi r^2 h.\] Step 2: Use the geometry of the cone. The semi-vertical angle is \( 30^\circ \), meaning the angle between the axis (height) and the slant side is \( 30^\circ \). Therefore, \[\tan 30^\circ = \frac{r}{h}.\] Step 3: Find \( h \) in terms of \( r \). We know \( \tan 30^\circ = \dfrac{1}{\sqrt{3}} \), so \[\frac{r}{h} = \frac{1}{\sqrt{3}},\] which gives \[h = r\sqrt{3}.\] Step 4: Substitute \( h = r\sqrt{3} \) into the volume formula. \[V = \frac{1}{3}\pi r^2 \cdot r\sqrt{3} = \frac{\sqrt{3}}{3}\pi r^3.\] Step 5: Simplify. \[V = \frac{\pi r^3}{\sqrt{3}} = \frac{\sqrt{3}\,\pi r^3}{3}.\]

Answer: \( V = \dfrac{\sqrt{3}\,\pi r^3}{3} \)

Example 2

Question: A conical tank (vertex pointing downward) has a semi-vertical angle of \( 60^\circ \). Water drains from a tap at the bottom. At any instant, the water surface has radius \( r \). Express the volume of water remaining in the conical tank in terms of \( r \) alone.

Solution: Step 1: Write the general volume formula for a cone of radius \( r \) and height \( h \). \[V = \frac{1}{3}\pi r^2 h.\] Step 2: Apply the semi-vertical angle condition. The semi-vertical angle is \( 60^\circ \), so \[\tan 60^\circ = \frac{r}{h}.\] Step 3: Since \( \tan 60^\circ = \sqrt{3} \), we get \[\frac{r}{h} = \sqrt{3},\] and therefore \[h = \frac{r}{\sqrt{3}}.\] Step 4: Substitute \( h = \dfrac{r}{\sqrt{3}} \) into the volume expression. \[V = \frac{1}{3}\pi r^2 \cdot \frac{r}{\sqrt{3}} = \frac{\pi r^3}{3\sqrt{3}}.\] Step 5: Rationalise the denominator. \[V = \frac{\pi r^3}{3\sqrt{3}} \times \frac{\sqrt{3}}{\sqrt{3}} = \frac{\sqrt{3}\,\pi r^3}{9}.\]

Answer: \( V = \dfrac{\sqrt{3}\,\pi r^3}{9} \)

🎯 Try a Similar Question

Try a Similar Question

Question: A conical vessel is filled with water. The semi-vertical angle of the cone is \( 30^\circ \). Water leaks from a tap at the bottom of the cone at a uniform rate. Express the volume \( V \) of water in the conical vessel in terms of its radius \( r \) only (eliminate the height \( h \)).

Solution

  1. Step 1: Identify the relationship between height and radius using the semi-vertical angle: Let \( h \) be the height of the water level and \( r \) be the radius of the water surface at any instant. The semi-vertical angle is \( \theta = 30^\circ \). By definition of the semi-vertical angle in a cone, \[ \tan(30^\circ) = \frac{r}{h} \]
  2. Step 2: Solve for h in terms of r: We know that \( \tan(30^\circ) = \frac{1}{\sqrt{3}} \). Substituting, \[ \frac{1}{\sqrt{3}} = \frac{r}{h} \] Rearranging, \[ h = r\sqrt{3} \]
  3. Step 3: Write the volume of the cone: The volume of a cone is given by \[ V = \frac{1}{3}\pi r^2 h \] Substituting \( h = r\sqrt{3} \), \[ V = \frac{1}{3}\pi r^2 \cdot r\sqrt{3} \]
  4. Step 4: Simplify the expression: Simplifying, \[ V = \frac{\sqrt{3}}{3}\pi r^3 \] This can also be written as \[ V = \frac{\pi r^3}{\sqrt{3}} \]

Answer: The volume of water in the conical vessel in terms of its radius \( r \) is \[ V = \frac{\sqrt{3}}{3}\pi r^3 \]

Everything you get with Solver7

More questions in Application of Integrals