SOLVER7 Study. Nothing Else.
Exercise 12.1 Q24

Find \(lim_{x\rightarrow1}f(x),\) where \(f(x)=\begin{cases}x^2-1&x\le 1\\ -x^2-1,&x>1\end{cases}\)

CBSE Class 11 Maths · Limits and Derivatives

Solution

👶 Simple Explanation

Simple Explanation

Imagine walking toward a door from two different hallways. From the left hallway, you arrive at height 0. From the right hallway, you arrive at height -2. Those are two different landing spots! A limit only exists when both paths bring you to the exact same place. Here, the function uses one rule when approaching from the left and a different rule from the right. Because the two sides land at different values, the limit simply does not exist.

Answer: The limit \( \lim_{x \to 1} f(x) \) does not exist, since the left-hand limit is \( 0 \) and the right-hand limit is \( -2 \).

📖 Limit of a Piecewise Function at x = 1

Detailed Explanation

When a function is defined by different formulas on either side of a point, we cannot just substitute the value directly. Instead we must check the two one-sided limits. The Left-Hand Limit (LHL) uses values of \( x \) slightly less than the point, and the Right-Hand Limit (RHL) uses values of \( x \) slightly greater than the point. The limit \( \lim_{x \to a} f(x) \) exists only if LHL and RHL are both finite and equal. Here, for \( x \le 1 \) the function is \( x^2 - 1 \), and for \( x > 1 \) it is \( -x^2 - 1 \), so the rule changes exactly at \( x = 1 \). That is why we must compute both sides.

Formula Used

\[\lim_{x \to a} f(x) \text{ exists } \iff \lim_{x \to a^-} f(x) = \lim_{x \to a^+} f(x)\]

Solution

  1. Step 1: Identify which piece applies on each side of \( x = 1 \). For \( x \le 1 \) (approaching from the left), use \( f(x) = x^2 - 1 \). For \( x > 1 \) (approaching from the right), use \( f(x) = -x^2 - 1 \).
  2. Step 2: Compute the Left-Hand Limit using the piece for \( x \le 1 \). \[\lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} (x^2 - 1) = 1^2 - 1 = 0\]
  3. Step 3: Compute the Right-Hand Limit using the piece for \( x > 1 \). \[\lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} (-x^2 - 1) = -(1)^2 - 1 = -2\]
  4. Step 4: Compare the two one-sided limits. We found LHL \( = 0 \) and RHL \( = -2 \). Since \( 0 \ne -2 \), the left and right limits are not equal.
  5. Step 5: Apply the existence condition. Because \( \lim_{x \to 1^-} f(x) \ne \lim_{x \to 1^+} f(x) \), the two-sided limit does not exist.

Final Answer

The limit \( \lim_{x \to 1} f(x) \) does not exist, since the left-hand limit is \( 0 \) and the right-hand limit is \( -2 \).

Common Mistake

A common mistake is to substitute \( x = 1 \) into only one piece (usually \( x^2 - 1 \)) and conclude the limit is \( 0 \). You must always check BOTH one-sided limits when the formula changes at the point; here they disagree, so the limit does not exist.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the two pieces of the function around \( x = 1 \). For \( x \le 1 \), the rule is \( f(x) = x^2 - 1 \). For \( x > 1 \), the rule is \( f(x) = -x^2 - 1 \). — Reason: Because the formula changes exactly at \( x = 1 \), direct substitution is unreliable; we must treat each side separately.
  2. Step 2: Compute the Left-Hand Limit (LHL) by applying the piece valid for \( x \le 1 \): \[ \lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} (x^2 - 1) \] Substituting \( x = 1 \) into this piece: \[ = 1^2 - 1 = 0 \] — Reason: Values approaching from the left satisfy \( x \le 1 \), so \( f(x) = x^2 - 1 \) applies here.
  3. Step 3: Compute the Right-Hand Limit (RHL) by applying the piece valid for \( x > 1 \): \[ \lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} (-x^2 - 1) \] Substituting \( x = 1 \) into this piece: \[ = -(1)^2 - 1 = -1 - 1 = -2 \] — Reason: Values approaching from the right satisfy \( x > 1 \), so \( f(x) = -x^2 - 1 \) applies here.
  4. Step 4: Compare the two one-sided limits. We have LHL \( = 0 \) and RHL \( = -2 \). Since \( 0 \ne -2 \), the two limits disagree. — Reason: The existence condition requires both sides to match; a mismatch immediately tells us the limit fails to exist.
  5. Step 5: Apply the existence condition. Because \( \lim_{x \to 1^-} f(x) \ne \lim_{x \to 1^+} f(x) \), the two-sided limit \( \lim_{x \to 1} f(x) \) does not exist. — Reason: By definition, a limit exists only when both one-sided limits are finite and identical.

Final Answer

The limit \( \lim_{x \to 1} f(x) \) does not exist, since the left-hand limit is \( 0 \) and the right-hand limit is \( -2 \).

Common Mistake

One common mistake: students use only the piece defined at \( x = 1 \) (i.e. \( x^2 - 1 \)) for both sides, obtaining LHL \( = \) RHL \( = 0 \) and incorrectly concluding the limit exists. Always check which piece governs each side of the boundary separately.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Left-Hand Limit: \[\lim_{x \to 1^-} f(x) = \lim_{x \to 1^-} (x^2 - 1) = (1)^2 - 1 = 0\]
  2. Step 2: Right-Hand Limit: \[\lim_{x \to 1^+} f(x) = \lim_{x \to 1^+} (-x^2 - 1) = -(1)^2 - 1 = -2\]
  3. Step 3: Since \( 0 \ne -2 \), the limit does not exist.

Answer: The limit \( \lim_{x \to 1} f(x) \) does not exist, since the left-hand limit is \( 0 \) and the right-hand limit is \( -2 \).

➕ More Examples

More Examples

Example 1

Question: Find \( \lim_{x \to 2} f(x) \), where \[ f(x) = \begin{cases} x^2 + 3 & x \le 2 \\ 3x + 1 & x > 2 \end{cases} \]

Solution: We compute the Left-Hand Limit (LHL) and Right-Hand Limit (RHL) at \( x = 2 \). Left-Hand Limit: As \( x \to 2^- \), we use \( f(x) = x^2 + 3 \). \[ \lim_{x \to 2^-} f(x) = \lim_{x \to 2^-} \left( x^2 + 3 \right) = (2)^2 + 3 = 4 + 3 = 7 \] Right-Hand Limit: As \( x \to 2^+ \), we use \( f(x) = 3x + 1 \). \[ \lim_{x \to 2^+} f(x) = \lim_{x \to 2^+} \left( 3x + 1 \right) = 3(2) + 1 = 6 + 1 = 7 \] Since LHL = RHL = 7, the limit exists. \[ \lim_{x \to 2} f(x) = 7 \]

Answer: \( \lim_{x \to 2} f(x) = 7 \)

Example 2

Question: Find \( \lim_{x \to -1} g(x) \), where \[ g(x) = \begin{cases} 2x^2 + x & x < -1 \\ x^3 - 4 & x \ge -1 \end{cases} \]

Solution: We compute the Left-Hand Limit (LHL) and Right-Hand Limit (RHL) at \( x = -1 \). Left-Hand Limit: As \( x \to -1^- \), we use \( g(x) = 2x^2 + x \). \[ \lim_{x \to -1^-} g(x) = \lim_{x \to -1^-} \left( 2x^2 + x \right) = 2(-1)^2 + (-1) = 2(1) - 1 = 1 \] Right-Hand Limit: As \( x \to -1^+ \), we use \( g(x) = x^3 - 4 \). \[ \lim_{x \to -1^+} g(x) = \lim_{x \to -1^+} \left( x^3 - 4 \right) = (-1)^3 - 4 = -1 - 4 = -5 \] Since LHL \( = 1 \ne -5 = \) RHL, the two one-sided limits are not equal. Therefore, the limit does not exist. \[ \lim_{x \to -1} g(x) \text{ does not exist} \]

Answer: \( \lim_{x \to -1} g(x) \) does not exist, since LHL \( = 1 \ne -5 = \) RHL.

🎯 Try a Similar Question

Try a Similar Question

Question: Find \( \lim_{x \to 2} f(x) \), where \[ f(x) = \begin{cases} x^2 + x - 3, & x \le 2 \\ 3x^2 - 7, & x > 2 \end{cases} \]

Solution

  1. Step 1: Identify the two pieces at x = 2: For \( x \le 2 \), the function is \( f(x) = x^2 + x - 3 \). For \( x > 2 \), the function is \( f(x) = 3x^2 - 7 \). We need to compute the Left-Hand Limit (LHL) and Right-Hand Limit (RHL) at \( x = 2 \) separately.
  2. Step 2: Compute the Left-Hand Limit (LHL): The LHL uses the piece valid for \( x \le 2 \), which is \( x^2 + x - 3 \). \[ \lim_{x \to 2^-} f(x) = \lim_{x \to 2^-} \left( x^2 + x - 3 \right) \] Substituting \( x = 2 \): \[ = (2)^2 + (2) - 3 = 4 + 2 - 3 = 3 \] So the LHL is \( 3 \).
  3. Step 3: Compute the Right-Hand Limit (RHL): The RHL uses the piece valid for \( x > 2 \), which is \( 3x^2 - 7 \). \[ \lim_{x \to 2^+} f(x) = \lim_{x \to 2^+} \left( 3x^2 - 7 \right) \] Substituting \( x = 2 \): \[ = 3(2)^2 - 7 = 3 \times 4 - 7 = 12 - 7 = 5 \] So the RHL is \( 5 \).
  4. Step 4: Compare LHL and RHL: We found: LHL \( = 3 \) and RHL \( = 5 \). Since \( 3 \ne 5 \), the Left-Hand Limit and Right-Hand Limit are not equal. Therefore, \( \lim_{x \to 2} f(x) \) does not exist.

Answer: The limit \( \lim_{x \to 2} f(x) \) does not exist, since the Left-Hand Limit is \( 3 \) and the Right-Hand Limit is \( 5 \), and they are not equal.

Everything you get with Solver7

More questions in Limits and Derivatives