A rod of length \(12\ cm\) moves with its ends always touching the coordinate axes. Determine the equation of the locus of a point \(P\) on the rod, which is \(3\ cm\) from the end in contact with the \(x\)-axis.
CBSE Class 11 Maths · Conic Sections
CBSE Class 11 Maths · Conic Sections
Imagine a stick lying across a corner, with one end sliding along the floor and the other end sliding up the wall. Mark a dot on the stick, not at the middle but closer to one end. As the stick slides around, that dot moves. If you trace every spot the dot visits, you get a shape called an ellipse — like a squashed circle. The ellipse equation tells us exactly which points the dot can reach. The answer here is \[\frac{x^2}{81} + \frac{y^2}{9} = 1.\]
Answer: The locus of the point \( P \) is the ellipse \[\frac{x^2}{81} + \frac{y^2}{9} = 1.\]
A locus is the path traced by a moving point that satisfies a given geometric condition. Here, a rod of fixed length \( 12\ cm \) has its two ends touching the two axes: one end on the x-axis and the other end on the y-axis. As the rod slides, these end-points keep changing, but the rod length stays constant. We fix a point \( P \) on the rod at a fixed distance from one end. To find the locus of \( P \), we express the coordinates of \( P \) in terms of one variable (an angle \( \theta \) that the rod makes with an axis), then eliminate that variable to get a direct relation between \( x \) and \( y \). This relation is the equation of the locus, which turns out to be an ellipse.
If the rod makes angle \( \theta \) with the x-axis, the coordinates of a point dividing the rod are found using projections: horizontal part \( = (\text{distance})\cos\theta \), vertical part \( = (\text{distance})\sin\theta \). The identity used to eliminate \( \theta \) is \[\cos^2\theta + \sin^2\theta = 1.\]
The locus of the point \( P \) is the ellipse \[\frac{x^2}{81} + \frac{y^2}{9} = 1.\]
A common mistake is mixing up which distance goes with which axis: since \( P \) is \( 3\ cm \) from the end on the x-axis, the segment from that end is \( 3 \) and to the other end is \( 9 \), giving \( x = 9\cos\theta \) and \( y = 3\sin\theta \). Swapping these leads to the wrong ellipse \( \frac{x^2}{9} + \frac{y^2}{81} = 1 \).
The locus of the point \( P \) is the ellipse \[\frac{x^2}{81} + \frac{y^2}{9} = 1.\]
One common mistake: Students forget that the coordinates of \( P \) depend on which end of the rod they measure from. Measuring the distance from \( A \) (the x-axis end) gives \( x = 9\cos\theta \) and \( y = 3\sin\theta \), leading to \( a^{2} = 81 \) and \( b^{2} = 9 \). Mixing up the end or the distance (using 9 instead of 3, or vice versa) gives an incorrect ellipse equation.
Answer: The locus of the point \( P \) is the ellipse \[\frac{x^2}{81} + \frac{y^2}{9} = 1.\]
Question: A rod of length 20 cm slides with its ends always in contact with the coordinate axes. Find the equation of the locus of a point P on the rod that is 8 cm from the end touching the x-axis.
Solution: Let the end of the rod on the x-axis be A and the end on the y-axis be B. The rod has total length 20 cm. The point P is 8 cm from A (the end on the x-axis), so P is \( 20 - 8 = 12 \) cm from B (the end on the y-axis). Let A = \( (h, 0) \) and B = \( (0, k) \). Since AB = 20, we have \[ h^2 + k^2 = 400. \] P divides AB such that AP = 8 and PB = 12. By the section formula, P divides AB in ratio 8 : 12 from A. The coordinates of P = \( (x, y) \) are: \[ x = \frac{12 \cdot h + 8 \cdot 0}{8 + 12} = \frac{12h}{20} = \frac{3h}{5} \] and \[ y = \frac{12 \cdot 0 + 8 \cdot k}{8 + 12} = \frac{8k}{20} = \frac{2k}{5}. \] From these, we get \[ h = \frac{5x}{3} \] and \[ k = \frac{5y}{2}. \] Substituting into \( h^2 + k^2 = 400 \): \[ \left(\frac{5x}{3}\right)^2 + \left(\frac{5y}{2}\right)^2 = 400 \] \[ \frac{25x^2}{9} + \frac{25y^2}{4} = 400 \] Dividing throughout by 400: \[ \frac{x^2}{144} + \frac{y^2}{64} = 1. \] This is an ellipse with semi-major axis 12 along the x-axis and semi-minor axis 8 along the y-axis.
Answer: \[\frac{x^2}{144} + \frac{y^2}{64} = 1\]
Question: A ladder of length 15 m rests against a wall, with its foot on the floor and its top against the wall, both ends free to slide. A rung on the ladder is 9 m from the foot (the end on the floor, treated as the x-axis). Find the equation of the locus traced by this rung as the ladder slides.
Solution: Model the floor as the x-axis and the wall as the y-axis. Let the foot of the ladder be A = \( (h, 0) \) and the top be B = \( (0, k) \). The ladder has length 15 m, so \[ h^2 + k^2 = 225. \] The rung P = \( (x, y) \) is 9 m from A, so it is \( 15 - 9 = 6 \) m from B. P divides AB in ratio AP : PB = 9 : 6 = 3 : 2. By the section formula: \[ x = \frac{6 \cdot h + 9 \cdot 0}{9 + 6} = \frac{6h}{15} = \frac{2h}{5} \] and \[ y = \frac{6 \cdot 0 + 9 \cdot k}{9 + 6} = \frac{9k}{15} = \frac{3k}{5}. \] From these: \[ h = \frac{5x}{2} \] and \[ k = \frac{5y}{3}. \] Substituting into \( h^2 + k^2 = 225 \): \[ \left(\frac{5x}{2}\right)^2 + \left(\frac{5y}{3}\right)^2 = 225 \] \[ \frac{25x^2}{4} + \frac{25y^2}{9} = 225 \] Dividing throughout by 225: \[ \frac{x^2}{36} + \frac{y^2}{81} = 1. \] This is an ellipse with semi-axis 6 along the x-axis and semi-axis 9 along the y-axis.
Answer: \[\frac{x^2}{36} + \frac{y^2}{81} = 1\]
Question: A rod of length 15 cm moves with its ends always touching the coordinate axes. Determine the equation of the locus of a point P on the rod, which is 6 cm from the end in contact with the x-axis.
Answer: The locus of the point P is the ellipse \[\frac{x^2}{81} + \frac{y^2}{36} = 1.\]