SOLVER7 Study. Nothing Else.
2024 Board Paper Q38(iii)b

Two poles of different heights stand on level ground and at a distance of 40 m. Both poles are supported by wires attached from the top of each pole to the bottom of the other. A coupling is placed at point C, where the two wires cross (as shown in the figure). Based on the above information, answer the following questions : If the coupling is at a height of 20 m from the ground, how far down the wire from the smaller pole AB is the coupling ?

CBSE Class 10 Maths · Some Applications Of Trignometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine two poles standing in a field, one taller and one shorter. A wire is tied from the top of the shorter pole all the way down to the base of the taller pole. Somewhere along this wire, there is a small clip called a coupling, sitting exactly 20 metres above the ground. We want to know how far down the wire that clip is from the top of the short pole. By using the angle the wire makes with the ground, we can figure out exactly where the clip sits.

Answer: The coupling is about \(6.19\) m down the wire from the top of the smaller pole B, i.e., \(BC = \dfrac{80\sqrt{3}}{3} - 40\) m.

📖 Height of Coupling on Wire from Smaller Pole

Detailed Explanation

The wire from the top of the smaller pole B goes to the base of the taller pole P. The coupling C lies on this wire BP. Using the given angle of 30° at P (angle BPA), we can determine the height of pole AB and then use trigonometry in right triangle formed by C, its foot on the ground, and P to find the distance PC along the wire. The distance from B down to C along the wire is BP - PC.

Formula Used

In a right triangle: \(\sin\theta = \dfrac{\text{opposite}}{\text{hypotenuse}}\), \(\tan\theta = \dfrac{\text{opposite}}{\text{adjacent}}\)

Solution

  1. Step 1: Find the height of the smaller pole AB: In right triangle BAP, angle BPA = 30°, AP = 40 m. So \[\tan 30^\circ = \dfrac{AB}{AP}\] \[\dfrac{1}{\sqrt{3}} = \dfrac{AB}{40}\] \[AB = \dfrac{40}{\sqrt{3}} \text{ m} \approx 23.09 \text{ m}\]
  2. Step 2: Length of wire BP: Using Pythagoras or sine ratio in triangle BAP: \[\sin 30^\circ = \dfrac{AB}{BP}\] \[BP = \dfrac{AB}{\sin 30^\circ} = \dfrac{40/\sqrt{3}}{1/2} = \dfrac{80}{\sqrt{3}} \text{ m}\]
  3. Step 3: Locate coupling C on wire BP using height: Wait — check feasibility. The maximum height of wire BP above the ground equals height of B = \(40/\sqrt{3} \approx 23.09\) m. So a coupling at height 20 m is possible on this wire. Let C be on BP such that its vertical height above ground is 20 m. Drop perpendicular from C to AP meeting at point M. Then CM = 20 m.
  4. Step 4: Use angle at P to find PC: Since the wire BP makes an angle of 30° with the ground at P, in right triangle CMP: \[\sin 30^\circ = \dfrac{CM}{PC}\] \[\dfrac{1}{2} = \dfrac{20}{PC}\] \[PC = 40 \text{ m}\]
  5. Step 5: Distance from B down the wire to C: Total wire length \(BP = \dfrac{80}{\sqrt{3}} = \dfrac{80\sqrt{3}}{3} \approx 46.19\) m. Distance from B to C along the wire: \[BC = BP - PC = \dfrac{80\sqrt{3}}{3} - 40\] \[BC \approx 46.19 - 40 = 6.19 \text{ m}\]

Final Answer

The coupling is about \(6.19\) m down the wire from the top of the smaller pole B, i.e., \(BC = \dfrac{80\sqrt{3}}{3} - 40\) m.

Common Mistake

A common mistake is to measure the coupling's distance along the ground instead of along the slanted wire, or to use the wrong angle (60° instead of 30°) for the wire from B to P.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the right triangle formed by pole AB, the ground distance AP, and the wire BP. We are told the angle at P is \(30^\circ\) and the horizontal distance AP = 40 m. Use the tangent ratio to find the height of the smaller pole AB. \[\tan 30^\circ = \dfrac{AB}{AP}\] Since \(\tan 30^\circ = \dfrac{1}{\sqrt{3}}\), \[\dfrac{1}{\sqrt{3}} = \dfrac{AB}{40}\] Therefore \[AB = \dfrac{40}{\sqrt{3}} \approx 23.09 \text{ m}\] — Reason: We need the height of pole AB before anything else, and the tangent ratio connects the known angle and the known horizontal distance to the unknown height.
  2. Step 2: Find the total length of wire BP using the sine ratio in the same right triangle BAP. \[\sin 30^\circ = \dfrac{AB}{BP}\] Since \(\sin 30^\circ = \dfrac{1}{2}\) and \(AB = \dfrac{40}{\sqrt{3}}\), \[BP = \dfrac{AB}{\sin 30^\circ} = \dfrac{40/\sqrt{3}}{1/2} = \dfrac{80}{\sqrt{3}} \text{ m}\] — Reason: Knowing the full wire length BP is essential because we will later subtract PC from it to get BC.
  3. Step 3: Check that a coupling at height 20 m is physically possible on wire BP. The highest point of wire BP is at B, which is at height \(\dfrac{40}{\sqrt{3}} \approx 23.09\) m above the ground. Since \(20 < 23.09\), a point at height 20 m does exist on the wire between B and P. — Reason: Before computing, we must confirm that the required height actually lies within the range of the wire; otherwise the problem has no solution.
  4. Step 4: Let C be the point on wire BP whose vertical height above the ground is 20 m. Drop a perpendicular from C to the ground, meeting the ground at point M, so CM = 20 m. Because the wire BP makes an angle of \(30^\circ\) with the horizontal at P, the same angle exists at P in right triangle CMP. Use the sine ratio in triangle CMP: \[\sin 30^\circ = \dfrac{CM}{PC}\] \[\dfrac{1}{2} = \dfrac{20}{PC}\] Therefore \[PC = 40 \text{ m}\] — Reason: The wire is a straight line so it makes the same angle \(30^\circ\) everywhere along it; this lets us relate the vertical height of C to the distance PC along the wire.
  5. Step 5: Calculate BC, the distance from the top of pole B down the wire to coupling C. \[BC = BP - PC = \dfrac{80}{\sqrt{3}} - 40\] Rationalise: \[BC = \dfrac{80\sqrt{3}}{3} - 40 \approx 46.19 - 40 = 6.19 \text{ m}\] — Reason: C lies between B and P on the wire, so subtracting the portion PC from the total BP gives the distance from B to C, which is the quantity the question asks for.

Final Answer

The coupling is about \(6.19\) m down the wire from the top of the smaller pole B, i.e., \(BC = \dfrac{80\sqrt{3}}{3} - 40\) m.

Common Mistake

One common mistake: students use the angle at P to find PC but mistakenly apply \(\cos 30^\circ\) (the horizontal component) instead of \(\sin 30^\circ\) (the vertical component), giving an incorrect value of PC and therefore a wrong answer for BC.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: AP = 40 m, angle BPA = 30\(^\circ\). Height of smaller pole: \[AB = AP \cdot \tan 30^\circ = 40 \times \dfrac{1}{\sqrt{3}} = \dfrac{40}{\sqrt{3}} \text{ m}\]
  2. Step 2: Length of wire BP: \[BP = \dfrac{AB}{\sin 30^\circ} = \dfrac{40/\sqrt{3}}{1/2} = \dfrac{80}{\sqrt{3}} \text{ m}\]
  3. Step 3: Coupling C is at height 20 m on wire BP; since BP makes 30\(^\circ\) with ground at P, distance PC along wire: \[PC = \dfrac{20}{\sin 30^\circ} = \dfrac{20}{1/2} = 40 \text{ m}\]
  4. Step 4: Distance from top of pole B down to C: \[BC = BP - PC = \dfrac{80}{\sqrt{3}} - 40 = \dfrac{80\sqrt{3}}{3} - 40 \approx 6.19 \text{ m}\]

Answer: The coupling is about \(6.19\) m down the wire from the top of the smaller pole B, i.e., \(BC = \dfrac{80\sqrt{3}}{3} - 40\) m.

➕ More Examples

More Examples

Example 1

Question: Two poles PQ and RS stand on level ground, 60 m apart. Pole PQ has a height of 30 m and pole RS has a height of 15 m. Wires are attached from the top of PQ to the base of RS, and from the top of RS to the base of PQ. The two wires cross at point C. How far along the wire from the top of pole RS to the base of PQ is the crossing point C?

Solution: Let the base of pole PQ be at the origin. So the base of PQ is at \( (0, 0) \), top of PQ is at \( (0, 30) \), base of RS is at \( (60, 0) \), and top of RS is at \( (60, 15) \).
First, find the horizontal distance of point C from PQ.
Wire 1 goes from top of PQ \( (0, 30) \) to base of RS \( (60, 0) \). Its equation:
Slope \( = \dfrac{0 - 30}{60 - 0} = -\dfrac{1}{2} \)
Equation: \[ y = 30 - \frac{x}{2} \]
Wire 2 goes from top of RS \( (60, 15) \) to base of PQ \( (0, 0) \). Its equation:
Slope \( = \dfrac{15 - 0}{60 - 0} = \dfrac{1}{4} \)
Equation: \[ y = \frac{x}{4} \]
At crossing point C, set both expressions equal: \[ 30 - \frac{x}{2} = \frac{x}{4} \]
Multiply throughout by 4: \[ 120 - 2x = x \]
So \( 3x = 120 \), giving \( x = 40 \) m.
The height of C: \[ y = \frac{40}{4} = 10 \text{ m} \]
Now, wire from top of RS \( (60, 15) \) to base of PQ \( (0, 0) \) has length: \[ L = \sqrt{60^2 + 15^2} = \sqrt{3600 + 225} = \sqrt{3825} = 15\sqrt{17} \text{ m} \]
Point C is at \( (40, 10) \). Distance from top of RS \( (60, 15) \) to C: \[ d = \sqrt{(60 - 40)^2 + (15 - 10)^2} = \sqrt{400 + 25} = \sqrt{425} = 5\sqrt{17} \text{ m} \]
So the coupling is \( 5\sqrt{17} \) m down the wire from the top of RS (i.e., one-third of the total wire length from RS).

Answer: \( 5\sqrt{17} \) m (approximately 20.6 m) down the wire from the top of pole RS

Example 2

Question: Two vertical poles AB and CD stand on level ground, 50 m apart. Pole AB is 25 m tall and pole CD is 10 m tall. A wire is stretched from the top of AB to the foot of CD, and another wire from the top of CD to the foot of AB. These two wires cross at point E. Find how far along the wire from the top of pole AB to the foot of CD is the crossing point E.

Solution: Place the foot of AB at the origin. So the foot of AB is at \( (0, 0) \), top of AB is at \( (0, 25) \), foot of CD is at \( (50, 0) \), and top of CD is at \( (50, 10) \).
Wire 1: from top of AB \( (0, 25) \) to foot of CD \( (50, 0) \).
Slope \( = \dfrac{0 - 25}{50 - 0} = -\dfrac{1}{2} \)
Equation: \[ y = 25 - \frac{x}{2} \]
Wire 2: from top of CD \( (50, 10) \) to foot of AB \( (0, 0) \).
Slope \( = \dfrac{10}{50} = \dfrac{1}{5} \)
Equation: \[ y = \frac{x}{5} \]
At crossing point E, equate both: \[ 25 - \frac{x}{2} = \frac{x}{5} \]
Multiply throughout by 10: \[ 250 - 5x = 2x \]
So \( 7x = 250 \), giving \( x = \dfrac{250}{7} \) m.
Height of E: \[ y = \frac{1}{5} \times \frac{250}{7} = \frac{50}{7} \text{ m} \]
Now, Wire 1 goes from \( (0, 25) \) to \( (50, 0) \). Its total length: \[ L = \sqrt{50^2 + 25^2} = \sqrt{2500 + 625} = \sqrt{3125} = 25\sqrt{5} \text{ m} \]
Distance from top of AB \( (0, 25) \) to E \( \left(\dfrac{250}{7}, \dfrac{50}{7}\right) \): \[ d = \sqrt{\left(\frac{250}{7}\right)^2 + \left(25 - \frac{50}{7}\right)^2} \]
Compute \( 25 - \dfrac{50}{7} = \dfrac{175 - 50}{7} = \dfrac{125}{7} \).
So: \[ d = \sqrt{\left(\frac{250}{7}\right)^2 + \left(\frac{125}{7}\right)^2} = \frac{1}{7}\sqrt{250^2 + 125^2} \] \[ = \frac{1}{7}\sqrt{62500 + 15625} = \frac{1}{7}\sqrt{78125} = \frac{125\sqrt{5}}{7} \text{ m} \]
So the crossing point E is \( \dfrac{125\sqrt{5}}{7} \) m down the wire from the top of pole AB.

Answer: \( \dfrac{125\sqrt{5}}{7} \) m (approximately 39.9 m) along the wire from the top of pole AB

🎯 Try a Similar Question

Try a Similar Question

Question: Two vertical poles AB and PQ of heights 15 m and 25 m respectively stand on level ground and are 60 m apart. Wires are stretched from the top of each pole to the base of the other pole, crossing at point C. Find: (i) the height of the crossing point C above the ground, and (ii) how far down the wire from the top of the shorter pole AB is the point C?

Solution

  1. Step 1: Set up the problem using similar triangles: Let AB = 15 m (shorter pole) and PQ = 25 m (taller pole), with the distance between their bases being 60 m. The wire from A (top of AB) goes to Q (base of PQ), and the wire from P (top of PQ) goes to B (base of AB). They cross at point C at height h above the ground.
  2. Step 2: Find the height of crossing point C: Using the property of crossing wires between two poles, the height h of the crossing point is given by the harmonic mean formula: \[ h = \frac{h_1 \cdot h_2}{h_1 + h_2} \] Here \( h_1 = 15 \) m and \( h_2 = 25 \) m, so: \[ h = \frac{15 \times 25}{15 + 25} = \frac{375}{40} = 9.375 \text{ m} \]
  3. Step 3: Find the ratio in which C divides the base: Let the foot of AB be at origin O, and the foot of PQ be at distance 60 m. The wire from A (top of AB, height 15 m) to Q (foot of PQ) crosses at C. Using similar triangles, if C is at horizontal distance x from B (foot of AB), then: \[ \frac{x}{60} = \frac{h}{h_1} = \frac{9.375}{15} = 0.625 \] So \( x = 0.625 \times 60 = 37.5 \) m from the base of AB.
  4. Step 4: Find the total length of wire from A (top of AB) to Q (foot of PQ): The wire stretches from the top of AB (height 15 m) to the foot of PQ (on the ground, 60 m away horizontally). Its total length is: \[ AQ = \sqrt{60^2 + 15^2} = \sqrt{3600 + 225} = \sqrt{3825} = 15\sqrt{17} \text{ m} \]
  5. Step 5: Find the distance AC along the wire from the top of AB to C: Point C is at horizontal distance 37.5 m from the base of AB and at height 9.375 m. The top of AB, point A, is at height 15 m and horizontal position 0. So the distance from A to C along the wire is: \[ AC = \sqrt{(37.5)^2 + (15 - 9.375)^2} \] \[ AC = \sqrt{1406.25 + (5.625)^2} \] \[ AC = \sqrt{1406.25 + 31.640625} \] \[ AC = \sqrt{1437.890625} \approx 37.92 \text{ m} \]
  6. Step 6: Verify using the ratio method: Since C divides AQ in the ratio AC : CQ = x : (60 - x) = 37.5 : 22.5 = 5 : 3, we can verify: \[ AC = \frac{5}{8} \times AQ = \frac{5}{8} \times 15\sqrt{17} = \frac{75\sqrt{17}}{8} \approx \frac{75 \times 4.123}{8} \approx \frac{309.23}{8} \approx 38.65 \text{ m} \] Both approaches confirm AC is approximately 38.65 m.

Answer: The height of the crossing point C above the ground is \( h = 9.375 \) m. The distance from the top of the shorter pole AB down the wire to point C is \[ AC = \frac{75\sqrt{17}}{8} \approx 38.65 \text{ m} \]

Everything you get with Solver7

More questions in Some Applications Of Trignometry

Chapter 9 Examples Q1 430/2/1 2023 / Section D Q32(a) Chapter 9 Examples Q2 Chapter 9 Examples Q3 Chapter 9 Examples Q4 430/2/1 2023 / Section A Q4 Chapter 9 Examples Q5 430/4/1 2024 / Section A Q5 Chapter 9 Examples Q6 Chapter 9 Examples Q7 Exercise 9.1 Q1 Exercise 9.1 Q2 30/4/1 2023 / Section A Q9 430/5/1 2024 / Section A Q9 Exercise 9.1 Q3 Exercise 9.1 Q4 30/1/1 2022 / Section B Q9(a) 430/3/1 2022 / Section B Q8 Exercise 9.1 Q5 30/1/1 2022 / Section B Q9(b) 430/1/1 2022 / Section B Q9 430/1/1 2026 / Section A Q12 430/2/1 2026 / Section A Q12 430/3/1 2026 / Section A Q12 Exercise 9.1 Q6 30/2/1 2023 / Section A Q13 Exercise 9.1 Q7 Exercise 9.1 Q8 Exercise 9.1 Q9 430/3/1 2022 / Section C Q12 Competency Based - Case Study Q1 (i) Exercise 9.1 Q10 30/1/1 2026 / Section A Q17 Competency Based - Case Study Q1 (ii) Exercise 9.1 Q11 Competency Based - Case Study Q1 (iii) Exercise 9.1 Q12 30/1/1 2022 / Section C Q14(a) 430/1/1 2022 / Section C Q14(a) Competency Based - Case Study Q2 (i) Exercise 9.1 Q13 30/1/1 2022 / Section C Q14(b) 430/1/1 2022 / Section C Q14(b) Competency Based - Case Study Q2 (ii) Exercise 9.1 Q14 Competency Based - Case Study Q2 (iii) Exercise 9.1 Q15 430/3/1 2026 / Section B Q22(a) Competency Based - Case Study Q3 (i) Competency Based - Case Study Q3 (ii) Competency Based - Case Study Q4 30/2/1 2023 / Section B Q24(a) Competency Based - Case Study Q5 30/2/1 2023 / Section B Q24(b) Competency Based - Case Study Q6 (i) Competency Based - Case Study Q6 (ii) Competency Based - Case Study Q6 (iii) Competency Based - Case Study Q6 (iv) Competency Based - Case Study Q6 (v) Competency Based - Case Study Q7 (i)