SOLVER7 Study. Nothing Else.
2024 Board Paper Q38(iii)a

Two poles of different heights stand on level ground and at a distance of 40 m. Both poles are supported by wires attached from the top of each pole to the bottom of the other. A coupling is placed at point C, where the two wires cross (as shown in the figure). Based on the above information, answer the following questions : If the angle of elevation of the top of the pole PQ from the top of the pole AB is \(30^\circ,\) find the distance BQ.

CBSE Class 10 Maths · Some Applications Of Trignometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine two tall sticks standing in a field. One stick is shorter and one is taller. A wire connects the top of the shorter stick to the top of the taller stick. That wire goes up at a small angle, like a ramp. We know how far apart the sticks are, and we know the angle of the ramp. Using a special maths trick called cosine, we can figure out exactly how long that wire is. The answer tells us the wire stretches about 46 metres.

Answer: \[ BQ = \dfrac{80\sqrt{3}}{3} \text{ m} \approx 46.19 \text{ m} \]

📖 Distance BQ using Angle of Elevation

Detailed Explanation

When we look from the top of one pole (B) to the top of a taller pole (Q), the horizontal line from B is parallel to the ground AP. The angle between this horizontal line and the line of sight BQ is called the angle of elevation. If we drop a perpendicular from B to PQ, we form a right triangle in which the horizontal distance equals AP = 40 m, and the angle of elevation at B is 30°. We can use the cosine ratio (adjacent/hypotenuse) to find BQ, where BQ is the hypotenuse of that right triangle.

Formula Used

\[ \cos\theta = \dfrac{\text{adjacent}}{\text{hypotenuse}} \]

Solution

  1. Step 1: Set up the right triangle: Draw a horizontal line from B parallel to AP, meeting PQ at point M. Then BM = AP = 40 m (since AB is perpendicular to AP and MP is perpendicular to AP, ABMP is a rectangle). The angle of elevation \( \angle QBM = 30^\circ \) and \( \angle BMQ = 90^\circ \).
  2. Step 2: Identify sides of the right triangle BMQ: In right triangle BMQ, the side adjacent to the 30° angle is BM = 40 m, and the hypotenuse is BQ (the wire from B to Q).
  3. Step 3: Apply the cosine ratio: Using \( \cos 30^\circ = \dfrac{BM}{BQ} \), we get \[ \cos 30^\circ = \dfrac{40}{BQ} \]
  4. Step 4: Substitute the value of cos 30°: Since \( \cos 30^\circ = \dfrac{\sqrt{3}}{2} \), we have \[ \dfrac{\sqrt{3}}{2} = \dfrac{40}{BQ} \]
  5. Step 5: Solve for BQ: Cross-multiplying gives \[ BQ = \dfrac{40 \times 2}{\sqrt{3}} = \dfrac{80}{\sqrt{3}} \] Rationalising the denominator: \[ BQ = \dfrac{80\sqrt{3}}{3} \text{ m} \]
  6. Step 6: Approximate value: Taking \( \sqrt{3} \approx 1.732 \), \[ BQ \approx \dfrac{80 \times 1.732}{3} \approx 46.19 \text{ m} \]

Final Answer

\[ BQ = \dfrac{80\sqrt{3}}{3} \text{ m} \approx 46.19 \text{ m} \]

Common Mistake

A common mistake is to use tan 30° instead of cos 30°, treating BQ as the opposite side rather than the hypotenuse. Remember, BQ is the slant line of sight (hypotenuse), while the 40 m horizontal distance is adjacent to the 30° angle at B.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a horizontal line from point B (top of the shorter pole) parallel to the ground AP, and let it meet the taller pole PQ at point M. Since AB is perpendicular to AP and MP is perpendicular to AP, the quadrilateral ABMP is a rectangle, so BM = AP = 40 m. — Reason: Creating this auxiliary line turns the problem into a standard right triangle, making trigonometry directly applicable.
  2. Step 2: Identify the right triangle formed: triangle BMQ has a right angle at M, the angle of elevation \( \angle QBM = 30^\circ \), the side adjacent to \( 30^\circ \) is BM = 40 m, and the hypotenuse is BQ (the wire whose length we need). — Reason: Labelling the sides clearly tells us exactly which trigonometric ratio to use.
  3. Step 3: Write the cosine ratio for the angle at B: \[ \cos 30^\circ = \dfrac{BM}{BQ} \] Substituting BM = 40 m: \[ \cos 30^\circ = \dfrac{40}{BQ} \] — Reason: Cosine connects the adjacent side and the hypotenuse, which are exactly the two quantities we know or want.
  4. Step 4: Substitute the exact value \( \cos 30^\circ = \dfrac{\sqrt{3}}{2} \): \[ \dfrac{\sqrt{3}}{2} = \dfrac{40}{BQ} \] — Reason: Using the exact surd value keeps the answer precise rather than introducing rounding errors at an early stage.
  5. Step 5: Cross-multiply to isolate BQ: \[ BQ \times \sqrt{3} = 40 \times 2 \] \[ BQ = \dfrac{80}{\sqrt{3}} \] — Reason: Cross-multiplication rearranges the equation so that BQ is expressed as a simple fraction.
  6. Step 6: Rationalise the denominator by multiplying the numerator and denominator by \( \sqrt{3} \): \[ BQ = \dfrac{80}{\sqrt{3}} \times \dfrac{\sqrt{3}}{\sqrt{3}} = \dfrac{80\sqrt{3}}{3} \] Evaluating numerically: \( \sqrt{3} \approx 1.732 \), so \( BQ \approx \dfrac{80 \times 1.732}{3} \approx 46.19 \) m. — Reason: Rationalising removes the surd from the denominator, giving the standard simplified form required in Class 10 answers.

Final Answer

\[ BQ = \dfrac{80\sqrt{3}}{3} \text{ m} \approx 46.19 \text{ m} \]

Common Mistake

One common mistake: Students sometimes set up \( \sin 30^\circ = \dfrac{40}{BQ} \) instead of \( \cos 30^\circ = \dfrac{40}{BQ} \), confusing which side (opposite vs. adjacent) the horizontal distance BM represents in the right triangle BMQ.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw horizontal from B meeting PQ at M: \ BM = AP = 40 m, \ \( \angle QBM = 30^\circ \), \ \( \angle BMQ = 90^\circ \)
  2. Step 2: Apply cosine ratio in right triangle BMQ: \[ \cos 30^\circ = \dfrac{BM}{BQ} = \dfrac{40}{BQ} \]
  3. Step 3: Substitute \( \cos 30^\circ = \dfrac{\sqrt{3}}{2} \) and solve: \[ BQ = \dfrac{40 \times 2}{\sqrt{3}} = \dfrac{80}{\sqrt{3}} = \dfrac{80\sqrt{3}}{3} \]

Answer: \[ BQ = \dfrac{80\sqrt{3}}{3} \text{ m} \approx 46.19 \text{ m} \]

➕ More Examples

More Examples

Example 1

Question: Two poles AB and PQ of different heights stand on level ground, 60 m apart. Wires connect the top of each pole to the foot of the other, crossing at point C. The angle of elevation of the top of pole PQ from the top of pole AB is \(45^\circ\). Find the distance BQ (the horizontal distance between the bases of the poles, which equals the ground distance between them) and verify the setup. Note: Here AB and PQ are the two poles; B and Q are their bases on the ground. If the height of AB is 20 m, find the height of PQ.

Solution: Let the height of pole AB be \(h_1 = 20\) m and the height of pole PQ be \(h_2\) m. The horizontal distance between the poles is \(BQ = 60\) m. The angle of elevation of the top of PQ from the top of AB is \(45^\circ\). Draw a horizontal line from the top of AB (point A) to a point directly above Q. The vertical rise from the level of A to the level of P is \((h_2 - h_1)\) m (assuming PQ is taller). The horizontal distance is 60 m. Using the tangent ratio: \(\tan(45^\circ) = \frac{h_2 - h_1}{BQ}\) Substituting known values: \(1 = \frac{h_2 - 20}{60}\) Solving for \(h_2\): \(h_2 - 20 = 60\) So \(h_2 = 80\) m. The distance BQ is given as 60 m, and the height of pole PQ is 80 m.

Answer: BQ = 60 m (given); Height of PQ = 80 m

Example 2

Question: Pole RS and pole MN stand vertically on level ground, 50 m apart (distance SN = 50 m). Cables run from the top of RS to the base N of MN, and from the top of MN to the base S of RS, crossing at point C. The angle of elevation of the top of pole MN from the top of pole RS is \(30^\circ\). If the height of pole RS is 15 m, find the height of pole MN.

Solution: Let the height of pole RS be \(h_1 = 15\) m and the height of pole MN be \(h_2\) m. The horizontal distance between the two poles is \(SN = 50\) m. The angle of elevation of the top of MN from the top of RS is \(30^\circ\). Consider the right triangle formed by the horizontal line from the top of RS to the vertical line of MN. The opposite side (vertical rise) is \((h_2 - h_1)\) m and the adjacent side (horizontal distance) is 50 m. Applying the tangent ratio: \(\tan(30^\circ) = \frac{h_2 - h_1}{SN}\) We know \(\tan(30^\circ) = \frac{1}{\sqrt{3}}\), so: \(\frac{1}{\sqrt{3}} = \frac{h_2 - 15}{50}\) Multiplying both sides by 50: \(h_2 - 15 = \frac{50}{\sqrt{3}}\) Rationalising: \(h_2 - 15 = \frac{50\sqrt{3}}{3}\) Therefore: \(h_2 = 15 + \frac{50\sqrt{3}}{3}\) Substituting \(\sqrt{3} \approx 1.732\): \(h_2 \approx 15 + \frac{50 \times 1.732}{3} \approx 15 + \frac{86.6}{3} \approx 15 + 28.87 \approx 43.87\) m. So the height of pole MN is \(15 + \frac{50\sqrt{3}}{3}\) m, which is approximately 43.87 m.

Answer: Height of MN \(= 15 + \frac{50\sqrt{3}}{3}\) m \(\approx 43.87\) m

🎯 Try a Similar Question

Try a Similar Question

Question: Two vertical poles PQ and AB stand on level ground 60 m apart. The poles are supported by wires attached from the top of each pole to the base of the other, crossing at point C. If the angle of elevation of the top of pole AB from the top of pole PQ is \( 45^\circ \), find the distance QA (i.e., the horizontal distance from Q to A).

Solution

  1. Step 1: Set up the diagram: Let pole PQ have its base at Q and pole AB have its base at A. The two bases are on level ground with QA = 60 m. Let the height of pole PQ be \( h_1 \) and the height of pole AB be \( h_2 \), with \( h_2 > h_1 \) (since we look upward from the top of PQ to the top of AB).
  2. Step 2: Identify the right triangle: Looking from the top of pole PQ toward the top of pole AB, we form a right triangle. The horizontal distance between the two poles is QA = 60 m. The vertical rise from the top of PQ to the top of AB is \( h_2 - h_1 \). The angle of elevation from the top of PQ to the top of AB is \( 45^\circ \).
  3. Step 3: Apply the tangent ratio: Using \( \tan(\theta) = \dfrac{\text{Opposite}}{\text{Adjacent}} \) in the right triangle formed: \[ \tan(45^\circ) = \frac{h_2 - h_1}{QA} \] Since \( \tan(45^\circ) = 1 \) and QA = 60 m: \[ 1 = \frac{h_2 - h_1}{60} \] Therefore: \[ h_2 - h_1 = 60 \text{ m} \]
  4. Step 4: Interpret the question: The question asks for the distance QA, which is the horizontal distance between the bases of the two poles. This is already given as the separation between the poles. However, re-reading carefully, the question asks us to confirm and calculate QA using the angle of elevation, verifying consistency. The horizontal distance QA is the adjacent side in the right triangle used above, and it equals 60 m directly. But if the problem instead asks: given the angle of elevation is \( 45^\circ \) and the height difference is 60 m, find QA, then: \[ QA = \frac{h_2 - h_1}{\tan(45^\circ)} = \frac{60}{1} = 60 \text{ m} \]
  5. Step 5: Reframe — find the height of pole AB given a specific height of PQ: Suppose the height of pole PQ is \( h_1 = 20 \) m. From Step 3, \( h_2 - h_1 = 60 \) m, so \[ h_2 = h_1 + 60 = 20 + 60 = 80 \text{ m} \] The height of pole AB is 80 m. The distance QA between the bases of the poles is 60 m.
  6. Step 6: State the final answer: The horizontal distance QA between the two poles is \( 60 \) m, and the height of pole AB is \( 80 \) m (given height of PQ = 20 m). The angle of elevation of \( 45^\circ \) confirms: \[ \tan(45^\circ) = \frac{80 - 20}{60} = \frac{60}{60} = 1 \checkmark \]

Answer: The distance QA between the two poles is \( 60 \) m, and the height of pole AB is \( 80 \) m (with pole PQ = 20 m), since \( \tan(45^\circ) = 1 \) gives \( h_2 - h_1 = 60 \) m.

Everything you get with Solver7

More questions in Some Applications Of Trignometry

Chapter 9 Examples Q1 430/2/1 2023 / Section D Q32(a) Chapter 9 Examples Q2 Chapter 9 Examples Q3 Chapter 9 Examples Q4 430/2/1 2023 / Section A Q4 Chapter 9 Examples Q5 430/4/1 2024 / Section A Q5 Chapter 9 Examples Q6 Chapter 9 Examples Q7 Exercise 9.1 Q1 Exercise 9.1 Q2 30/4/1 2023 / Section A Q9 430/5/1 2024 / Section A Q9 Exercise 9.1 Q3 Exercise 9.1 Q4 30/1/1 2022 / Section B Q9(a) 430/3/1 2022 / Section B Q8 Exercise 9.1 Q5 30/1/1 2022 / Section B Q9(b) 430/1/1 2022 / Section B Q9 430/1/1 2026 / Section A Q12 430/2/1 2026 / Section A Q12 430/3/1 2026 / Section A Q12 Exercise 9.1 Q6 30/2/1 2023 / Section A Q13 Exercise 9.1 Q7 Exercise 9.1 Q8 Exercise 9.1 Q9 430/3/1 2022 / Section C Q12 Competency Based - Case Study Q1 (i) Exercise 9.1 Q10 30/1/1 2026 / Section A Q17 Competency Based - Case Study Q1 (ii) Exercise 9.1 Q11 Competency Based - Case Study Q1 (iii) Exercise 9.1 Q12 30/1/1 2022 / Section C Q14(a) 430/1/1 2022 / Section C Q14(a) Competency Based - Case Study Q2 (i) Exercise 9.1 Q13 30/1/1 2022 / Section C Q14(b) 430/1/1 2022 / Section C Q14(b) Competency Based - Case Study Q2 (ii) Exercise 9.1 Q14 Competency Based - Case Study Q2 (iii) Exercise 9.1 Q15 430/3/1 2026 / Section B Q22(a) Competency Based - Case Study Q3 (i) Competency Based - Case Study Q3 (ii) Competency Based - Case Study Q4 30/2/1 2023 / Section B Q24(a) Competency Based - Case Study Q5 30/2/1 2023 / Section B Q24(b) Competency Based - Case Study Q6 (i) Competency Based - Case Study Q6 (ii) Competency Based - Case Study Q6 (iii) Competency Based - Case Study Q6 (iv) Competency Based - Case Study Q6 (v) Competency Based - Case Study Q7 (i)