SOLVER7 Study. Nothing Else.
2024 Board Paper Q38(ii)

Two poles of different heights stand on level ground and at a distance of 40 m. Both poles are supported by wires attached from the top of each pole to the bottom of the other. A coupling is placed at point C, where the two wires cross (as shown in the figure). Based on the above information, answer the following questions : Find the height of pole PQ.

CBSE Class 10 Maths · Some Applications Of Trignometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine a tall flag pole standing straight up on flat ground. A wire stretches from the bottom of a nearby pole all the way up to the top of this flag pole. That wire makes a small tilted angle with the ground. We know how far apart the two poles are — about 40 metres. Using that angle and distance, we can figure out exactly how tall the flag pole is. It is like knowing how long a ramp is and how steep it leans, then working out the wall height it rests against.

Answer: The height of pole PQ is \( \dfrac{40\sqrt{3}}{3} \) m, which is approximately \( 23.09 \) m.

📖 Height of Pole PQ using Trigonometry

Detailed Explanation

In this problem, we have two poles AB and PQ standing vertically on level ground, with AP = 40 m. A wire goes from the top of pole PQ (point Q) down to the foot A of the other pole, making an angle of 30° with the ground at P... wait, actually the 30° is the angle that the wire AQ makes with the ground at P side. Looking at the figure, the angle 30° is at P between PA and the wire from A to Q. Since Q is directly above P, triangle APQ is right-angled at P. Using the tangent ratio in this right triangle, we can find the height PQ. Recall that in a right triangle, \( \tan(\theta) = \frac{\text{opposite}}{\text{adjacent}} \).

Formula Used

\[ \tan(\theta) = \frac{\text{Opposite side}}{\text{Adjacent side}} \]

Solution

  1. Step 1: Identify the right triangle: Pole PQ is vertical, so it is perpendicular to the ground AP. Triangle APQ is right-angled at P. The wire AQ is the hypotenuse. The angle of elevation of Q from A is 30° (angle QAP = 30°, as shown in the figure at vertex A along the wire going to Q).
  2. Step 2: Write the tangent relation: In right triangle APQ, with the angle 30° at A: \[ \tan(30^\circ) = \frac{PQ}{AP} \] Here, PQ is the opposite side (height of pole) and AP = 40 m is the adjacent side.
  3. Step 3: Substitute the known values: We know \( \tan(30^\circ) = \frac{1}{\sqrt{3}} \). Therefore, \[ \frac{1}{\sqrt{3}} = \frac{PQ}{40} \]
  4. Step 4: Solve for PQ: Cross-multiplying, \[ PQ = \frac{40}{\sqrt{3}} \] Rationalising the denominator, \[ PQ = \frac{40}{\sqrt{3}} \times \frac{\sqrt{3}}{\sqrt{3}} = \frac{40\sqrt{3}}{3} \text{ m} \]
  5. Step 5: Approximate the value: Taking \( \sqrt{3} \approx 1.732 \), \[ PQ \approx \frac{40 \times 1.732}{3} \approx \frac{69.28}{3} \approx 23.09 \text{ m} \]

Final Answer

The height of pole PQ is \( \dfrac{40\sqrt{3}}{3} \) m, which is approximately \( 23.09 \) m.

Common Mistake

A common mistake is to confuse which angle is used with which pole. The wire from A to Q makes an angle of 30° at A (not at P), so \( \tan(30^\circ) \) must be used with pole PQ. Students often mistakenly use 60° here, which actually corresponds to the wire from P to B (the shorter pole AB).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Set up the geometry: Pole PQ stands vertically on level ground, so PQ is perpendicular to the ground. The distance from the foot of the other pole (point A) to the foot of pole PQ (point P) is AP = 40 m. The wire runs from A to the top of pole PQ, which is point Q. — Reason: Identifying which sides are vertical, horizontal, and slanted tells us exactly which triangle to work with.
  2. Step 2: Identify the right triangle: Triangle APQ has a right angle at P (because the pole PQ is vertical and AP is horizontal ground). The side PQ is opposite the angle at A, and AP is adjacent to the angle at A. The wire AQ is the hypotenuse. — Reason: Labelling opposite, adjacent, and hypotenuse relative to the known angle lets us pick the correct trigonometric ratio.
  3. Step 3: Write the tangent equation: The angle of elevation of Q from A is \( 30^\circ \), so the angle at vertex A inside triangle APQ is \( 30^\circ \). Applying the tangent ratio: \[ \tan(30^\circ) = \frac{PQ}{AP} \] — Reason: We use tangent because we know the adjacent side AP and want the opposite side PQ; tangent directly links these two without involving the hypotenuse.
  4. Step 4: Substitute known values: We know \( \tan(30^\circ) = \dfrac{1}{\sqrt{3}} \) and AP = 40 m. Substituting: \[ \frac{1}{\sqrt{3}} = \frac{PQ}{40} \] — Reason: Plugging in the numerical value of the trigonometric ratio and the given distance turns the equation into one with a single unknown, PQ.
  5. Step 5: Solve for PQ: Cross-multiplying both sides by 40: \[ PQ = \frac{40}{\sqrt{3}} \] — Reason: Isolating PQ on one side gives its value directly from the equation.
  6. Step 6: Rationalise the denominator: Multiply numerator and denominator by \( \sqrt{3} \): \[ PQ = \frac{40}{\sqrt{3}} \times \frac{\sqrt{3}}{\sqrt{3}} = \frac{40\sqrt{3}}{3} \] — Reason: Rationalising removes the surd from the denominator, giving a cleaner standard form for the answer.
  7. Step 7: Convert to decimal: Using \( \sqrt{3} \approx 1.732 \): \[ PQ \approx \frac{40 \times 1.732}{3} = \frac{69.28}{3} \approx 23.09 \text{ m} \] — Reason: Expressing the answer as a decimal makes it easy to interpret in real-world terms.

Final Answer

The height of pole PQ is \( \dfrac{40\sqrt{3}}{3} \) m, which is approximately \( 23.09 \) m.

Common Mistake

One common mistake: Students sometimes write \( \tan(30^\circ) = \dfrac{AP}{PQ} \) (flipping opposite and adjacent), which gives an incorrect equation. Always check: the side directly across from the angle is the opposite side (here PQ), and the side forming the angle along the ground is the adjacent side (here AP).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: Right triangle APQ with AP = 40 m, angle QAP = 30°, PQ perpendicular to AP.
  2. Step 2: \[ \tan(30^\circ) = \frac{PQ}{AP} \Rightarrow \frac{1}{\sqrt{3}} = \frac{PQ}{40} \]
  3. Step 3: \[ PQ = \frac{40}{\sqrt{3}} = \frac{40 \times \sqrt{3}}{\sqrt{3} \times \sqrt{3}} = \frac{40\sqrt{3}}{3} \approx 23.09 \text{ m} \]

Answer: The height of pole PQ is \( \dfrac{40\sqrt{3}}{3} \) m, which is approximately \( 23.09 \) m.

➕ More Examples

More Examples

Example 1

Question: Two poles AB and PQ of different heights stand on level ground 60 m apart. A wire is tied from the top of AB to the foot of PQ, and another wire from the top of PQ to the foot of AB. The two wires cross at point C. The height of pole AB is 24 m and the height of the crossing point C above the ground is 8 m. Find the height of pole PQ.

Solution: Let the height of pole AB be \( p = 24 \) m, the height of pole PQ be \( q \) m, and the height of the crossing point C be \( h = 8 \) m. Using the crossed-wires (crossed-ladders) property, the height of the crossing point is related to the two pole heights by: \[ \frac{1}{h} = \frac{1}{p} + \frac{1}{q} \] Substituting the known values: \[ \frac{1}{8} = \frac{1}{24} + \frac{1}{q} \] Solving for \( \frac{1}{q} \): \[ \frac{1}{q} = \frac{1}{8} - \frac{1}{24} \] Finding a common denominator (24): \[ \frac{1}{q} = \frac{3}{24} - \frac{1}{24} = \frac{2}{24} = \frac{1}{12} \] Therefore: \[ q = 12 \text{ m} \] The height of pole PQ is 12 m.

Answer: Height of pole PQ = 12 m

Example 2

Question: Two vertical poles RS and TU are erected on flat ground, 50 m apart. Wires are stretched from the top of each pole to the base of the other, crossing at point M. The height of pole RS is 30 m and the height of pole TU is 20 m. Find the height of the crossing point M above the ground.

Solution: Let the height of pole RS be \( p = 30 \) m, the height of pole TU be \( q = 20 \) m, and the height of point M above the ground be \( h \) m. Using the crossed-wires property: \[ \frac{1}{h} = \frac{1}{p} + \frac{1}{q} \] Substituting: \[ \frac{1}{h} = \frac{1}{30} + \frac{1}{20} \] Finding a common denominator (60): \[ \frac{1}{h} = \frac{2}{60} + \frac{3}{60} = \frac{5}{60} = \frac{1}{12} \] Therefore: \[ h = 12 \text{ m} \] The height of crossing point M above the ground is 12 m. Verification using similar triangles: In triangle formed by pole RS (height 30 m) and the ground, the crossing point divides it such that \( \frac{h}{p} + \frac{h}{q} = \frac{12}{30} + \frac{12}{20} = \frac{2}{5} + \frac{3}{5} = 1 \), which confirms the answer.

Answer: Height of crossing point M = 12 m

🎯 Try a Similar Question

Try a Similar Question

Question: Two poles AB and PQ of different heights stand vertically on level ground, 60 m apart. Wire from the top of AB is tied to the foot of PQ, and wire from the top of PQ is tied to the foot of AB. The two wires cross at point C. It is known that pole AB has a height of 30 m and the crossing point C is at a height of 10 m from the ground. Find the height of pole PQ.

Solution

  1. Step 1: Set up the similar triangles: Let the height of pole AB be \( p = 30 \) m and the height of pole PQ be \( q \) m (unknown). The distance between the poles is 60 m. The crossing point C is at height \( h = 10 \) m from the ground.
  2. Step 2: Use the harmonic mean formula for crossing height: The height of the crossing point of the two wires satisfies \[ \frac{1}{h} = \frac{1}{p} + \frac{1}{q} \] Substituting the known values \( h = 10 \) and \( p = 30 \): \[ \frac{1}{10} = \frac{1}{30} + \frac{1}{q} \]
  3. Step 3: Solve for q: Rearranging to find \( \frac{1}{q} \): \[ \frac{1}{q} = \frac{1}{10} - \frac{1}{30} \] Finding a common denominator: \[ \frac{1}{q} = \frac{3}{30} - \frac{1}{30} = \frac{2}{30} = \frac{1}{15} \] Therefore \( q = 15 \) m.
  4. Step 4: Verify using similar triangles: Let foot of AB be A and foot of PQ be P, with AP = 60 m. The wire from top of AB (height 30 m) to P, and the wire from top of PQ (height 15 m) to A, cross at C at height 10 m. Using triangle similarity on the wire from A (top of AB) to P: the crossing divides AP in ratio \( \frac{AC}{CP} = \frac{h}{p - h} \cdot \frac{p}{h} \). Alternatively, directly: in triangle APB (where B is top of AB), the point C lies at height 10 m. The horizontal distance from A to the foot of C is \( x = 60 \times \frac{10}{30} = 20 \) m. From PQ side: \( 60 - x = 40 \) m, and height \( \frac{15 \times 40}{60} = 10 \) m. This confirms \( q = 15 \) m.

Answer: The height of pole PQ is \( 15 \) m.

Everything you get with Solver7

More questions in Some Applications Of Trignometry

Chapter 9 Examples Q1 430/2/1 2023 / Section D Q32(a) Chapter 9 Examples Q2 Chapter 9 Examples Q3 Chapter 9 Examples Q4 430/2/1 2023 / Section A Q4 Chapter 9 Examples Q5 430/4/1 2024 / Section A Q5 Chapter 9 Examples Q6 Chapter 9 Examples Q7 Exercise 9.1 Q1 Exercise 9.1 Q2 30/4/1 2023 / Section A Q9 430/5/1 2024 / Section A Q9 Exercise 9.1 Q3 Exercise 9.1 Q4 30/1/1 2022 / Section B Q9(a) 430/3/1 2022 / Section B Q8 Exercise 9.1 Q5 30/1/1 2022 / Section B Q9(b) 430/1/1 2022 / Section B Q9 430/1/1 2026 / Section A Q12 430/2/1 2026 / Section A Q12 430/3/1 2026 / Section A Q12 Exercise 9.1 Q6 30/2/1 2023 / Section A Q13 Exercise 9.1 Q7 Exercise 9.1 Q8 Exercise 9.1 Q9 430/3/1 2022 / Section C Q12 Competency Based - Case Study Q1 (i) Exercise 9.1 Q10 30/1/1 2026 / Section A Q17 Competency Based - Case Study Q1 (ii) Exercise 9.1 Q11 Competency Based - Case Study Q1 (iii) Exercise 9.1 Q12 30/1/1 2022 / Section C Q14(a) 430/1/1 2022 / Section C Q14(a) Competency Based - Case Study Q2 (i) Exercise 9.1 Q13 30/1/1 2022 / Section C Q14(b) 430/1/1 2022 / Section C Q14(b) Competency Based - Case Study Q2 (ii) Exercise 9.1 Q14 Competency Based - Case Study Q2 (iii) Exercise 9.1 Q15 430/3/1 2026 / Section B Q22(a) Competency Based - Case Study Q3 (i) Competency Based - Case Study Q3 (ii) Competency Based - Case Study Q4 30/2/1 2023 / Section B Q24(a) Competency Based - Case Study Q5 30/2/1 2023 / Section B Q24(b) Competency Based - Case Study Q6 (i) Competency Based - Case Study Q6 (ii) Competency Based - Case Study Q6 (iii) Competency Based - Case Study Q6 (iv) Competency Based - Case Study Q6 (v) Competency Based - Case Study Q7 (i)