SOLVER7 Study. Nothing Else.
Chapter 6 Examples Q5

If a transversal intersects two lines such that the bisectors of a pair of corresponding angles are parallel, then prove that the two lines are parallel.

CBSE Class 9 Maths · Lines And Angles

Solution

👶 Simple Explanation

Simple Explanation

Imagine two roads running side by side. A crossing road cuts through both at matching corners. Now think of each matching corner being folded exactly in half. If those two folded halves point in the same direction and never meet, the matching corners must be perfectly equal. Equal matching corners always mean the two original roads run parallel. So by checking that the half-angles line up, we prove the full angles match, and the two lines must be parallel to each other.

Answer: Since the parallel bisectors make equal corresponding angles with the transversal, the full corresponding angles are equal, i.e. \( \angle APQ = \angle CQR \). Hence the two lines are parallel, \( AB \parallel CD \). Proved.

📖 Lines Parallel When Bisectors of Corresponding Angles are Parallel

Detailed Explanation

When a transversal crosses two lines, it forms pairs of corresponding angles. A key result from the chapter Lines and Angles is: two lines are parallel if and only if a pair of corresponding angles formed by a transversal are equal. In this problem we are told that the bisectors of a pair of corresponding angles are parallel. A bisector cuts an angle into two equal halves. Our plan is to use the fact that the two bisectors are parallel to show that the corresponding angles they came from are equal, and once corresponding angles are equal, the two original lines must be parallel.

Formula Used

If a transversal cuts two lines and a pair of corresponding angles are equal, then the lines are parallel. In symbols, if the corresponding angles satisfy \( \angle 1 = \angle 2 \), then the two lines are parallel. A bisector of an angle splits it so that each half equals \( \frac{1}{2} \) of the angle.

Solution

  1. Step 1: Set up the figure. Let a transversal \( t \) intersect two lines, line \( AB \) at point \( P \) and line \( CD \) at point \( Q \). Let one pair of corresponding angles be \( \angle APQ \) at \( P \) and \( \angle CQR \) at \( Q \) (both on the same side and in matching positions). Let ray \( PM \) be the bisector of \( \angle APQ \) and ray \( QN \) be the bisector of \( \angle CQR \).
  2. Step 2: Use the given information. We are told the two bisectors are parallel, that is \( PM \parallel QN \). The transversal \( t \) also cuts these two bisectors, so \( PM \) and \( QN \) are two parallel lines cut by the transversal \( t \).
  3. Step 3: Apply the corresponding angles property to the bisectors. Since \( PM \parallel QN \) and \( t \) is the transversal, the corresponding angles that the bisectors make with the transversal are equal. This gives \[ \angle MPQ = \angle NQR. \]
  4. Step 4: Relate these half-angles to the full angles. Because \( PM \) bisects \( \angle APQ \), we have \( \angle MPQ = \frac{1}{2}\angle APQ \). Similarly, because \( QN \) bisects \( \angle CQR \), we have \( \angle NQR = \frac{1}{2}\angle CQR \).
  5. Step 5: Substitute and simplify. From Step 3, \[ \frac{1}{2}\angle APQ = \frac{1}{2}\angle CQR. \] Multiplying both sides by \( 2 \) gives \[ \angle APQ = \angle CQR. \]
  6. Step 6: Conclude that the lines are parallel. Now \( \angle APQ \) and \( \angle CQR \) are a pair of corresponding angles formed by transversal \( t \) on lines \( AB \) and \( CD \), and they are equal. By the converse of the corresponding angles axiom, \[ AB \parallel CD. \]

Final Answer

Since the parallel bisectors make equal corresponding angles with the transversal, the full corresponding angles are equal, i.e. \( \angle APQ = \angle CQR \). Hence the two lines are parallel, \( AB \parallel CD \). Proved.

Common Mistake

A common mistake is to assume the two lines are parallel from the start and then use it in the proof. That is circular reasoning. You must only use the given fact that the bisectors are parallel, derive that the corresponding angles are equal, and only then conclude the lines are parallel.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Set up the figure clearly. Let transversal \( t \) meet line \( AB \) at point \( P \) and line \( CD \) at point \( Q \). At \( P \), the angle on one side of the transversal is \( \angle APQ \), and the corresponding angle at \( Q \) (in the matching position) is \( \angle CQR \). Let ray \( PM \) bisect \( \angle APQ \) and ray \( QN \) bisect \( \angle CQR \). — Reason: Naming all parts clearly makes every later step easy to follow.
  2. Step 2: Write what the given condition tells us about the bisectors. We are told \( PM \parallel QN \). The same transversal \( t \) that crosses \( AB \) and \( CD \) also crosses the two bisector rays \( PM \) and \( QN \). — Reason: The transversal serves as a common crossing line for both the original lines and their angle bisectors, which lets us connect all the angles together.
  3. Step 3: Apply the parallel-lines result to the bisectors. Because \( PM \parallel QN \) and \( t \) is a transversal cutting them, the corresponding angles formed at the bisectors are equal. The angle that \( t \) makes with \( PM \) at \( P \) corresponds to the angle that \( t \) makes with \( QN \) at \( Q \). So: \[ \angle MPQ = \angle NQR \] — Reason: This is the standard corresponding-angles theorem applied to the parallel bisectors.
  4. Step 4: Express each bisected angle in terms of the original angle. Since \( PM \) bisects \( \angle APQ \), we get \( \angle MPQ = \frac{1}{2} \angle APQ \). Since \( QN \) bisects \( \angle CQR \), we get \( \angle NQR = \frac{1}{2} \angle CQR \). — Reason: The definition of an angle bisector means each bisector ray cuts the angle into two equal halves.
  5. Step 5: Substitute the bisected-angle expressions into the equation from Step 3. We had \( \angle MPQ = \angle NQR \), so substituting gives: \[ \frac{1}{2} \angle APQ = \frac{1}{2} \angle CQR \] — Reason: Replacing the half-angles with their expressions in terms of the full angles links the bisectors back to the original angles.
  6. Step 6: Multiply both sides by \( 2 \) to get the full angles. \[ \angle APQ = \angle CQR \] — Reason: Multiplying both sides of an equation by the same non-zero number preserves equality, giving us the relationship between the original corresponding angles.
  7. Step 7: Apply the converse of the corresponding-angles theorem. Since the transversal \( t \) cuts lines \( AB \) and \( CD \) and the corresponding angles \( \angle APQ \) and \( \angle CQR \) are equal, the lines \( AB \) and \( CD \) must be parallel, i.e. \( AB \parallel CD \). — Reason: The converse theorem states that equal corresponding angles guarantee parallelism of the two lines.

Final Answer

Since the parallel bisectors make equal corresponding angles with the transversal, the full corresponding angles are equal, i.e. \( \angle APQ = \angle CQR \). Hence the two lines are parallel, \( AB \parallel CD \). Proved.

Common Mistake

One common mistake: Students forget to multiply both sides by 2 after substituting the half-angles, and incorrectly conclude that \( \angle APQ = \frac{1}{2} \angle CQR \) instead of \( \angle APQ = \angle CQR \) — always undo the \( \frac{1}{2} \) from the bisector definition before drawing the final conclusion.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: Transversal \( t \) meets line \( AB \) at \( P \) and line \( CD \) at \( Q \); ray \( PM \) bisects \( \angle APQ \), ray \( QN \) bisects \( \angle CQR \), and \( PM \parallel QN \).
  2. Step 2: Since \( PM \parallel QN \) and \( t \) is a transversal, corresponding angles formed by \( t \) with the bisectors are equal: \( \angle MPQ = \angle NQP \), i.e. \( \frac{1}{2}\angle APQ = \frac{1}{2}\angle CQR \).
  3. Step 3: Multiplying both sides by 2: \( \angle APQ = \angle CQR \).
  4. Step 4: Since corresponding angles \( \angle APQ = \angle CQR \) are equal, \( AB \parallel CD \).

Answer: Since the parallel bisectors make equal corresponding angles with the transversal, the full corresponding angles are equal, i.e. \( \angle APQ = \angle CQR \). Hence the two lines are parallel, \( AB \parallel CD \). Proved.

➕ More Examples

More Examples

Example 1

Question: A transversal intersects two lines at points P and Q. The bisectors of a pair of alternate interior angles are parallel to each other. Prove that the two lines are parallel.

Solution: Let the two lines be \( l \) and \( m \), and let the transversal \( t \) intersect \( l \) at point P and \( m \) at point Q. Let \( \angle APQ \) and \( \angle PQD \) be a pair of alternate interior angles formed at P and Q respectively (where A and D are on the same side of the transversal, lying between the two lines). Let PB be the bisector of \( \angle APQ \), so \[ \angle APB = \angle BPQ = \frac{1}{2} \angle APQ \] Let QC be the bisector of \( \angle PQD \), so \[ \angle PQC = \angle CQD = \frac{1}{2} \angle PQD \] It is given that PB \( \parallel \) QC. Since PB \( \parallel \) QC and PQ is a transversal cutting them, the alternate interior angles formed by PQ with PB and QC are equal. That is, \[ \angle BPQ = \angle PQC \] Substituting the half-angle expressions: \[ \frac{1}{2} \angle APQ = \frac{1}{2} \angle PQD \] Multiplying both sides by 2: \[ \angle APQ = \angle PQD \] Thus, the alternate interior angles formed by the transversal \( t \) with lines \( l \) and \( m \) are equal. By the converse of the Alternate Interior Angles Theorem, line \( l \) is parallel to line \( m \). Hence, the two lines are parallel.

Answer: Since the bisectors of alternate interior angles are parallel, the alternate interior angles themselves are equal, so the two lines are parallel.

Example 2

Question: A transversal EF intersects two lines AB and CD at points G and H respectively. The bisectors of co-interior angles \( \angle BGH \) and \( \angle DHG \) meet at a point R such that \( \angle GRH = 90^\circ \). Prove that AB \( \parallel \) CD.

Solution: Let the transversal EF intersect line AB at G and line CD at H. Let \( \angle BGH = 2x \) and \( \angle DHG = 2y \) be the co-interior angles (also called consecutive interior angles or same-side interior angles). GR bisects \( \angle BGH \), so \[ \angle RGH = x \] HR bisects \( \angle DHG \), so \[ \angle RHG = y \] In triangle GRH, the angle sum property gives: \[ \angle RGH + \angle RHG + \angle GRH = 180^\circ \] Substituting the known values: \[ x + y + 90^\circ = 180^\circ \] Solving: \[ x + y = 90^\circ \] Multiplying both sides by 2: \[ 2x + 2y = 180^\circ \] That is: \[ \angle BGH + \angle DHG = 180^\circ \] So the co-interior angles formed by the transversal EF with lines AB and CD are supplementary. By the converse of the Co-interior Angles Theorem (also known as the converse of the Same-Side Interior Angles postulate), line AB is parallel to line CD. Hence, AB \( \parallel \) CD.

Answer: Since the bisectors of the co-interior angles meet at 90°, the co-interior angles sum to 180°, proving AB ∥ CD.

🎯 Try a Similar Question

Try a Similar Question

Question: A transversal PQ intersects two lines AB and CD at points M and N respectively. The bisectors of a pair of co-interior (same-side interior) angles, namely \( \angle AMN \) and \( \angle MND \), meet at a point T. Prove that \( \angle MTN = 90^\circ \), given that AB is parallel to CD.

Solution

  1. Step 1: Identify the co-interior angles: Since the transversal PQ intersects line AB at M and line CD at N, the angles \( \angle AMN \) and \( \angle MND \) are co-interior angles (they lie on the same side of the transversal, between the two lines).
  2. Step 2: Use the parallel lines property: Since AB \( \parallel \) CD, co-interior angles are supplementary. Therefore: \[ \angle AMN + \angle MND = 180^\circ \]
  3. Step 3: Introduce the angle bisectors: Let MT be the bisector of \( \angle AMN \) and NT be the bisector of \( \angle MND \). By definition of angle bisectors: \[ \angle AMT = \frac{1}{2} \angle AMN \] and \[ \angle DNT = \frac{1}{2} \angle MND \]
  4. Step 4: Halve both sides of the supplementary angle equation: Dividing the equation from Step 2 by 2: \[ \frac{1}{2} \angle AMN + \frac{1}{2} \angle MND = 90^\circ \] Substituting from Step 3: \[ \angle AMT + \angle DNT = 90^\circ \]
  5. Step 5: Consider triangle MTN: In triangle MTN, the angle sum property gives: \[ \angle TMN + \angle MNT + \angle MTN = 180^\circ \] Here \( \angle TMN = \angle AMT \) (the bisector angle at M) and \( \angle MNT = \angle DNT \) (the bisector angle at N, noting T lies on the same side). So: \[ \angle AMT + \angle DNT + \angle MTN = 180^\circ \]
  6. Step 6: Substitute and conclude: From Step 4 we know \( \angle AMT + \angle DNT = 90^\circ \). Substituting into the equation from Step 5: \[ 90^\circ + \angle MTN = 180^\circ \] Therefore: \[ \angle MTN = 90^\circ \] Hence the bisectors of the co-interior angles meet at right angles. Proved.

Answer: The bisectors of the co-interior angles \( \angle AMN \) and \( \angle MND \) meet at point T such that \( \angle MTN = 90^\circ \). This follows because co-interior angles formed by parallel lines are supplementary, so each bisector contributes half of \( 180^\circ \), i.e. \( 90^\circ \), leaving \( \angle MTN = 90^\circ \). Proved.

Everything you get with Solver7

More questions in Lines And Angles