SOLVER7 Study. Nothing Else.
Exercise 3.2 Q2(iv)

See Fig.3.14, and write the following: The point identified by the coordinates \((2,-4).\)

CBSE Class 9 Maths · Coordinate Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine a treasure map where you start at the centre spot. The two numbers in \( (2, -4) \) are like directions. The first number, \( 2 \), says walk two steps to the right. The second number, \( -4 \), says walk four steps downward. Landing there puts you in the lower-right area of the map. Every labelled point on the graph sits at a unique spot, and only one of them matches exactly two steps right and four steps down.

Answer: The point identified by the coordinates \( (2, -4) \) is the point \( G \).

📖 Identifying a Point from its Coordinates

Detailed Explanation

In the Cartesian plane, every point is described by an ordered pair \( (x, y) \). The first number is the abscissa (the x-coordinate), which tells us how far to move left or right of the origin along the x-axis. The second number is the ordinate (the y-coordinate), which tells us how far to move up or down along the y-axis. A positive x means move right, a negative x means move left; a positive y means move up, a negative y means move down. Here we are given the pair \( (2, -4) \): since \( x = 2 \) is positive and \( y = -4 \) is negative, the point lies to the right of the y-axis and below the x-axis, which is the fourth quadrant. We match this location with the labelled points in the figure.

Formula Used

A point is written as \( (x, y) \), where \( x \) is the abscissa (horizontal distance) and \( y \) is the ordinate (vertical distance) measured from the origin.

Solution

  1. Step 1: Read the given coordinates as an ordered pair. Here the point is \( (2, -4) \), so the abscissa is \( x = 2 \) and the ordinate is \( y = -4 \).
  2. Step 2: Interpret the x-coordinate. Since \( x = 2 \) is positive, start at the origin \( O \) and move \( 2 \) units to the right along the x-axis.
  3. Step 3: Interpret the y-coordinate. Since \( y = -4 \) is negative, move \( 4 \) units downward from that position, parallel to the y-axis.
  4. Step 4: Determine the quadrant. A positive x and a negative y place the point in the fourth quadrant (below the x-axis and to the right of the y-axis).
  5. Step 5: Locate this position in Fig. 3.14. The point that sits at \( 2 \) units right and \( 4 \) units down is labelled \( G \).

Final Answer

The point identified by the coordinates \( (2, -4) \) is the point \( G \).

Common Mistake

A common mistake is to swap the coordinates and read the point as \( (-4, 2) \), or to confuse the sign of the ordinate and look above the x-axis. Always keep the order \( (x, y) \) fixed: move horizontally first using x, then vertically using y, respecting their signs.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Write out the given ordered pair and label its parts. The given coordinates are \( (2, -4) \), so the abscissa is \( x = 2 \) and the ordinate is \( y = -4 \). — Reason: Identifying each coordinate separately prevents confusion between horizontal and vertical movement.
  2. Step 2: Use the sign of the abscissa to decide the horizontal direction. Since \( x = 2 \) is positive, move 2 units to the right of the origin along the x-axis. — Reason: A positive abscissa always places the point to the right of the y-axis.
  3. Step 3: Use the sign of the ordinate to decide the vertical direction. Since \( y = -4 \) is negative, move 4 units downward from the position reached in Step 2, parallel to the y-axis. — Reason: A negative ordinate always places the point below the x-axis.
  4. Step 4: Determine the quadrant of the point. The abscissa \( x = 2 \) is positive and the ordinate \( y = -4 \) is negative, so the point lies in the fourth quadrant (right of the y-axis and below the x-axis). — Reason: Knowing the quadrant helps narrow down which labelled point on the figure matches the given coordinates.
  5. Step 5: Match the plotted location with the labelled points in the figure. The point that sits 2 units to the right of the origin and 4 units below it, in the fourth quadrant, corresponds to the label G. — Reason: Comparing the computed position with the figure gives the final identification of the point.

Final Answer

The point identified by the coordinates \( (2, -4) \) is the point \( G \).

Common Mistake

One common mistake: Students often swap the abscissa and ordinate, moving 4 units along the x-axis and 2 units along the y-axis instead of 2 units along the x-axis and 4 units along the y-axis, which leads them to identify the wrong point on the figure.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given coordinates: \( (2, -4) \), so abscissa \( x = 2 \), ordinate \( y = -4 \).
  2. Step 2: Move \( 2 \) units right along x-axis, then \( 4 \) units downward — places the point in Quadrant IV.
  3. Step 3: Matching this location with the labelled points in the figure identifies the point as \( G \).

Answer: The point identified by the coordinates \( (2, -4) \) is the point \( G \).

➕ More Examples

More Examples

Example 1

Question: On a Cartesian plane, several points are plotted. Identify the point whose coordinates are \( (-3, 5) \). State the quadrant in which it lies and describe how you would reach it starting from the origin.

Solution: We are given the coordinates \( (-3, 5) \). Here, the abscissa is \( -3 \) and the ordinate is \( 5 \). Starting from the origin O, we move 3 units to the left along the x-axis (since the abscissa is negative), and then 5 units upward parallel to the y-axis (since the ordinate is positive). The point we reach is \( (-3, 5) \). Since the x-coordinate is negative and the y-coordinate is positive, the point lies in Quadrant II.

Answer: The point \( (-3, 5) \) lies in Quadrant II. Starting from the origin, move 3 units to the left along the x-axis and then 5 units upward.

Example 2

Question: A point Q is marked on the Cartesian plane. Its abscissa is \( 4 \) and its ordinate is \( -6 \). Write the coordinates of point Q, identify the quadrant it belongs to, and describe the path from the origin to reach Q.

Solution: The abscissa of point Q is \( 4 \) and its ordinate is \( -6 \). Therefore, the coordinates of Q are \( (4, -6) \). Starting from the origin O, we move 4 units to the right along the x-axis (since the abscissa is positive), and then 6 units downward parallel to the y-axis (since the ordinate is negative). Since the x-coordinate is positive and the y-coordinate is negative, the point Q lies in Quadrant IV.

Answer: The coordinates of Q are \( (4, -6) \). It lies in Quadrant IV. From the origin, move 4 units to the right and then 6 units downward.

🎯 Try a Similar Question

Try a Similar Question

Question: Study the Cartesian plane given below, which shows several labelled points. Identify the point whose coordinates are \( (-3, 2) \). The points plotted on the plane are: A at \( (1, 3) \), B at \( (-3, 2) \), C at \( (4, -1) \), D at \( (-2, -4) \), E at \( (0, 3) \), F at \( (3, 0) \).

Solution

  1. Step 1: Understand what the coordinates mean: The given coordinates are \( (-3, 2) \). Here the abscissa (x-value) is \( -3 \) and the ordinate (y-value) is \( 2 \).
  2. Step 2: Determine the quadrant: Since the x-coordinate is \( -3 \) (negative) and the y-coordinate is \( 2 \) (positive), the point lies in the Second Quadrant (Quadrant II), i.e., to the left of the y-axis and above the x-axis.
  3. Step 3: Locate the point on the plane: Starting from the origin, move 3 units to the left along the x-axis (because the abscissa is \( -3 \)), then move 2 units upward parallel to the y-axis (because the ordinate is \( 2 \)). The point reached is \( (-3, 2) \).
  4. Step 4: Match with the labelled point: Checking the list of labelled points, the point at \( (-3, 2) \) is point B. Therefore, the required point is B.

Answer: The point identified by the coordinates \( (-3, 2) \) is the point B.

Everything you get with Solver7

More questions in Coordinate Geometry